Hvor er min usb harddisk ?

Jeg har installeret ubuntu 9.04 64 bit på min asus gamer bærbar fra expert N50VN jeg kan ikke se min 3.5 " usb harddisk på 500gb, men kan nemt se min usb harddisk på min alm dual core bærbar fra Toshiba L40-18R med ubuntu 9.10 64 bit.

Det forstår jeg ikke har brugt en cd der ikke fejler noget(9.04 64bit og så opdateret via nettet), Asusen er bare meget hurtigere en min toshiba både cpu ram harddisk er hurtigere men ikke noget vil hardware som kræver speciel distro eller software, jeg kan ikke bruge ubuntu 9.04 såvel som 9.10 hvis ikke jeg kan få adgang til min usb harddisk da jeg har over 100gb musik rigtig mange youtube videoer og mange billeder der skal overføres til Asusen for at jeg kan bruge min Asus bærbar og der e så lige ca 35-40 film som jeg heller ikke kan se.

dmesg=

[ 0.457826] pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.457829] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.457831] pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe9fffff]
[ 0.457833] pci_bus 0000:04: resource 2 pref mem [0xf6000000-0xf8efffff]
[ 0.457835] pci_bus 0000:08: resource 0 io: [0xe000-0xefff]
[ 0.457837] pci_bus 0000:08: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.457839] pci_bus 0000:08: resource 2 pref mem [0xf8f00000-0xf8ffffff]
[ 0.457842] pci_bus 0000:09: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.457844] pci_bus 0000:09: resource 3 io: [0x00-0xffff]
[ 0.457846] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.457873] NET: Registered protocol family 2
[ 0.458025] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.459132] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.462846] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.463332] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.463335] TCP reno registered
[ 0.463446] NET: Registered protocol family 1
[ 0.463511] Trying to unpack rootfs image as initramfs...
[ 0.501498] Switched to high resolution mode on CPU 1
[ 0.510014] Switched to high resolution mode on CPU 0
[ 0.634029] Freeing initrd memory: 7681k freed
[ 0.636818] Simple Boot Flag at 0x51 set to 0x1
[ 0.636991] Scanning for low memory corruption every 60 seconds
[ 0.637131] audit: initializing netlink socket (disabled)
[ 0.637148] type=2000 audit(1259869352.630:1): initialized
[ 0.646540] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.647842] VFS: Disk quotas dquot_6.5.2
[ 0.647895] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.648435] fuse init (API version 7.12)
[ 0.648511] msgmni has been set to 7928
[ 0.648699] alg: No test for stdrng (krng)
[ 0.648713] io scheduler noop registered
[ 0.648715] io scheduler anticipatory registered
[ 0.648717] io scheduler deadline registered
[ 0.648754] io scheduler cfq registered (default)
[ 0.648946] pci 0000:01:00.0: Boot video device
[ 0.649077] alloc irq_desc for 24 on node 0
[ 0.649079] alloc kstat_irqs on node 0
[ 0.649088] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.649093] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.649237] alloc irq_desc for 25 on node 0
[ 0.649239] alloc kstat_irqs on node 0
[ 0.649247] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.649258] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.649420] alloc irq_desc for 26 on node 0
[ 0.649422] alloc kstat_irqs on node 0
[ 0.649431] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.649442] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.649605] alloc irq_desc for 27 on node 0
[ 0.649607] alloc kstat_irqs on node 0
[ 0.649616] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.649627] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.649797] alloc irq_desc for 28 on node 0
[ 0.649799] alloc kstat_irqs on node 0
[ 0.649808] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.649819] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.649989] alloc irq_desc for 29 on node 0
[ 0.649991] alloc kstat_irqs on node 0
[ 0.650000] pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
[ 0.650016] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.650194] alloc irq_desc for 30 on node 0
[ 0.650196] alloc kstat_irqs on node 0
[ 0.650204] pcieport-driver 0000:00:1c.5: irq 30 for MSI/MSI-X
[ 0.650215] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.650322] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.650667] pciehp: Using ACPI for slot detection.
[ 0.650753] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0
[ 0.650797] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.650829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.650994] ACPI: AC Adapter [AC0] (on-line)
[ 0.651050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.651053] ACPI: Power Button [PWRF]
[ 0.651110] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.651117] ACPI: Sleep Button [SLPB]
[ 0.651157] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.651386] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.674099] ACPI: Lid Switch [LID]
[ 0.675132] ACPI: SSDT 00000000bff973c0 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.675724] ACPI: SSDT 00000000bff976a0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.676465] Monitor-Mwait will be used to enter C-1 state
[ 0.676488] Monitor-Mwait will be used to enter C-3 state
[ 0.676501] Marking TSC unstable due to TSC halts in idle
[ 0.676548] ACPI: CPU0 (power states: C1[C1] C2[C3])
[ 0.676569] processor LNXCPU:00: registered as cooling_device0
[ 0.676572] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.676919] ACPI: SSDT 00000000bff972f0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.677352] ACPI: SSDT 00000000bff97610 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.678211] ACPI: CPU1 (power states: C1[C1] C2[C3])
[ 0.678228] processor LNXCPU:01: registered as cooling_device1
[ 0.678231] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.687823] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.687830] ACPI: Thermal Zone [THRM] (54 C)
[ 0.688881] Linux agpgart interface v0.103
[ 0.688890] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.690056] brd: module loaded
[ 0.690456] loop: module loaded
[ 0.690517] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.690834] ahci 0000:00:1f.2: version 3.0
[ 0.690847] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.690882] alloc irq_desc for 31 on node 0
[ 0.690884] alloc kstat_irqs on node 0
[ 0.690894] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[ 0.690935] ahci: SSS flag set, parallel bus scan disabled
[ 0.690992] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[ 0.690995] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[ 0.691000] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.730060] scsi0 : ahci
[ 0.730140] scsi1 : ahci
[ 0.730194] scsi2 : ahci
[ 0.730245] scsi3 : ahci
[ 0.730304] scsi4 : ahci
[ 0.730355] scsi5 : ahci
[ 0.730619] ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 31
[ 0.730623] ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 31
[ 0.730625] ata3: DUMMY
[ 0.730626] ata4: DUMMY
[ 0.730627] ata5: DUMMY
[ 0.730630] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 31
[ 0.731552] Fixed MDIO Bus: probed
[ 0.731581] PPP generic driver version 2.4.2
[ 0.731656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.731698] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.731744] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.731747] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.731795] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.735706] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.735712] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.735725] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.749935] ACPI: Battery Slot [BAT0] (battery present)
[ 0.750021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.750095] usb usb1: configuration #1 chosen from 1 choice
[ 0.750121] hub 1-0:1.0: USB hub found
[ 0.750128] hub 1-0:1.0: 6 ports detected
[ 0.750218] alloc irq_desc for 23 on node 0
[ 0.750220] alloc kstat_irqs on node 0
[ 0.750225] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.750237] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.750240] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.750271] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.754170] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.754177] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.754188] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.770015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.770070] usb usb2: configuration #1 chosen from 1 choice
[ 0.770093] hub 2-0:1.0: USB hub found
[ 0.770098] hub 2-0:1.0: 6 ports detected
[ 0.770157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.770175] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.770243] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.770250] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.770253] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.770284] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.770316] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 0.770385] usb usb3: configuration #1 chosen from 1 choice
[ 0.770412] hub 3-0:1.0: USB hub found
[ 0.770417] hub 3-0:1.0: 2 ports detected
[ 0.770490] alloc irq_desc for 21 on node 0
[ 0.770492] alloc kstat_irqs on node 0
[ 0.770496] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.770502] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.770506] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.770532] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.770563] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.770631] usb usb4: configuration #1 chosen from 1 choice
[ 0.770654] hub 4-0:1.0: USB hub found
[ 0.770660] hub 4-0:1.0: 2 ports detected
[ 0.770733] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.770740] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.770743] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.770773] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.770806] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[ 0.770876] usb usb5: configuration #1 chosen from 1 choice
[ 0.770899] hub 5-0:1.0: USB hub found
[ 0.770905] hub 5-0:1.0: 2 ports detected
[ 0.770977] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.770983] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.770987] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.771017] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.771043] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.771110] usb usb6: configuration #1 chosen from 1 choice
[ 0.771133] hub 6-0:1.0: USB hub found
[ 0.771139] hub 6-0:1.0: 2 ports detected
[ 0.771207] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.771214] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.771217] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.771246] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.771270] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.771338] usb usb7: configuration #1 chosen from 1 choice
[ 0.771361] hub 7-0:1.0: USB hub found
[ 0.771366] hub 7-0:1.0: 2 ports detected
[ 0.771440] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.771446] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.771449] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.771482] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.771506] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 0.771572] usb usb8: configuration #1 chosen from 1 choice
[ 0.771597] hub 8-0:1.0: USB hub found
[ 0.771606] hub 8-0:1.0: 2 ports detected
[ 0.771701] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.774825] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.776376] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.776381] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.776384] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.776386] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.776388] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.776440] mice: PS/2 mouse device common for all mice
[ 0.776534] rtc_cmos 00:03: RTC can wake from S4
[ 0.776565] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.776593] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.776678] device-mapper: uevent: version 1.0.3
[ 0.776764] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.776830] device-mapper: multipath: version 1.1.0 loaded
[ 0.776833] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.777028] cpuidle: using governor ladder
[ 0.777105] cpuidle: using governor menu
[ 0.777459] TCP cubic registered
[ 0.777573] NET: Registered protocol family 10
[ 0.777954] lo: Disabled Privacy Extensions
[ 0.778213] NET: Registered protocol family 17
[ 0.778229] Bluetooth: L2CAP ver 2.13
[ 0.778231] Bluetooth: L2CAP socket layer initialized
[ 0.778234] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.778236] Bluetooth: SCO socket layer initialized
[ 0.778265] Bluetooth: RFCOMM TTY layer initialized
[ 0.778268] Bluetooth: RFCOMM socket layer initialized
[ 0.778269] Bluetooth: RFCOMM ver 1.11
[ 0.778958] PM: Resume from disk failed.
[ 0.778969] registered taskstats version 1
[ 0.779078] Magic number: 5:960:747
[ 0.779179] rtc_cmos 00:03: setting system clock to 2009-12-03 19:42:33 UTC (1259869353)
[ 0.779182] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.779183] EDD information not available.
[ 0.815208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.000055] Clocksource tsc unstable (delta = -196926820 ns)
[ 1.082552] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.084809] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1.085210] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.085213] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.123614] ata1.00: ACPI cmd ef/41:00:00:00:00:a0 succeeded
[ 1.125778] ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
[ 1.125781] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.128528] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1.128919] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.128922] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.167300] ata1.00: ACPI cmd ef/41:00:00:00:00:a0 succeeded
[ 1.169473] ata1.00: configured for UDMA/133
[ 1.180203] scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
[ 1.180314] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.180347] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.180385] sd 0:0:0:0: [sda] Write Protect is off
[ 1.180388] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.180408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.180521] sda: sda1 sda2 sda3 <
[ 1.192570] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.223643] sda5 >
[ 1.223871] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.354094] usb 2-1: configuration #1 chosen from 1 choice
[ 1.354450] hub 2-1:1.0: USB hub found
[ 1.354802] hub 2-1:1.0: 4 ports detected
[ 1.470050] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.681717] usb 2-5: configuration #1 chosen from 1 choice
[ 1.930061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.945024] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.945027] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.958685] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100, ATAPI AN
[ 1.958693] ata2.00: applying bridge limits
[ 1.962545] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 1.974015] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.974018] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.987693] ata2.00: configured for UDMA/100
[ 2.004178] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
[ 2.009785] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.009788] Uniform CD-ROM driver Revision: 3.20
[ 2.009846] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.009882] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.140909] usb 5-2: configuration #1 chosen from 1 choice
[ 2.220306] usb 2-1.4: new high speed USB device using ehci_hcd and address 4
[ 2.334087] usb 2-1.4: configuration #1 chosen from 1 choice
[ 2.334321] hub 2-1.4:1.0: USB hub found
[ 2.334676] hub 2-1.4:1.0: 4 ports detected
[ 2.360075] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.380079] Freeing unused kernel memory: 660k freed
[ 2.380256] Write protecting the kernel read-only data: 7584k
[ 2.534755] ohci1394 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.535919] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.535948] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.536039] r8169 0000:08:00.0: setting latency timer to 64
[ 2.536190] alloc irq_desc for 32 on node 0
[ 2.536192] alloc kstat_irqs on node 0
[ 2.536229] r8169 0000:08:00.0: irq 32 for MSI/MSI-X
[ 2.536758] eth0: RTL8168c/8111c at 0xffffc9000067c000, 00:24:8c:2d:13:20, XID 3c4000c0 IRQ 32
[ 2.543584] acpi device:1e: registered as cooling_device2
[ 2.543710] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/device:1a/input/input5
[ 2.543745] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.602064] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.622938] usb 2-1.4.1: new full speed USB device using ehci_hcd and address 5
[ 2.744622] usb 2-1.4.1: configuration #1 chosen from 1 choice
[ 2.751282] usbcore: registered new interface driver hiddev
[ 2.753618] generic-usb 0003:046D:0A07.0001: hiddev96,hidraw0: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1d.7-1.4.1/input2
[ 2.755612] input: Logitech Z-10 USB Speaker as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.3/input/input6
[ 2.755679] generic-usb 0003:046D:0A07.0002: input,hidraw1: USB HID v1.10 Device [Logitech Z-10 USB Speaker] on usb-0000:00:1d.7-1.4.1/input3
[ 2.755696] usbcore: registered new interface driver usbhid
[ 2.755698] usbhid: v2.6:USB HID core driver
[ 2.830307] usb 2-1.4.3: new full speed USB device using ehci_hcd and address 6
[ 2.935735] usb 2-1.4.3: configuration #1 chosen from 1 choice
[ 2.960783] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.0/input/input7
[ 2.960846] generic-usb 0003:046D:C526.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-1.4.3/input0
[ 2.964484] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.1/input/input8
[ 2.964625] generic-usb 0003:046D:C526.0004: input,hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-1.4.3/input1
[ 3.936034] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001be8d0d]
[ 4.173343] PM: Starting manual resume from disk
[ 4.173346] PM: Resume from partition 8:5
[ 4.173348] PM: Checking hibernation image.
[ 4.173627] PM: Resume from disk failed.
[ 4.186154] EXT4-fs (sda1): barriers enabled
[ 4.192588] kjournald2 starting: pid 437, dev sda1:8, commit interval 5 seconds
[ 4.192615] EXT4-fs (sda1): delayed allocation enabled
[ 4.192618] EXT4-fs: file extents enabled
[ 4.192906] EXT4-fs: mballoc enabled
[ 4.192917] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.878530] type=1505 audit(1259869357.593:2): operation="profile_load" pid=460 name=/usr/share/gdm/guest-session/Xsession
[ 4.998573] type=1505 audit(1259869357.710:3): operation="profile_load" pid=461 name=/sbin/dhclient3
[ 4.998612] type=1505 audit(1259869357.710:4): operation="profile_load" pid=461 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.998644] type=1505 audit(1259869357.710:5): operation="profile_load" pid=461 name=/usr/lib/connman/scripts/dhclient-script
[ 11.698103] type=1505 audit(1259869364.413:6): operation="profile_load" pid=462 name=/usr/bin/evince
[ 11.698464] type=1505 audit(1259869364.413:7): operation="profile_load" pid=462 name=/usr/bin/evince-previewer
[ 11.698788] type=1505 audit(1259869364.413:8): operation="profile_load" pid=462 name=/usr/bin/evince-thumbnailer
[ 11.913311] type=1505 audit(1259869364.633:9): operation="profile_load" pid=464 name=/usr/lib/cups/backend/cups-pdf
[ 11.913405] type=1505 audit(1259869364.633:10): operation="profile_load" pid=464 name=/usr/sbin/cupsd
[ 11.958618] type=1505 audit(1259869364.673:11): operation="profile_load" pid=465 name=/usr/sbin/tcpdump
[ 13.192014] Adding 1959888k swap on /dev/sda5. Priority:-1 extents:1 across:1959888k
[ 13.322554] EXT4-fs (sda1): internal journal on sda1:8
[ 14.136661] udev: starting version 147
[ 15.038189] Linux video capture interface: v2.00
[ 15.071419] lp: driver loaded but no devices found
[ 15.092642] sdhci: Secure Digital Host Controller Interface driver
[ 15.092644] sdhci: Copyright(c) Pierre Ossman
[ 15.107157] asus_laptop: Asus Laptop Support version 0.42
[ 15.111222] asus_laptop: N50Vn model detected
[ 15.151061] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 15.151077] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.152137] sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 15.153185] Registered led device: mmc0::
[ 15.153282] input: Asus Laptop extra buttons as /devices/virtual/input/input9
[ 15.154220] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
[ 15.157817] uvcvideo: Found UVC 1.00 device CNF7246 (04f2:b106)
[ 15.157845] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 15.165889] input: CNF7246 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
[ 15.165940] usbcore: registered new interface driver uvcvideo
[ 15.165942] USB Video Class driver (v0.1.0)
[ 15.180139] cfg80211: Calling CRDA to update world regulatory domain
[ 15.379512] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 15.379514] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 15.379686] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.379699] iwlagn 0000:03:00.0: setting latency timer to 64
[ 15.379776] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 15.426408] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 15.426473] alloc irq_desc for 33 on node 0
[ 15.426474] alloc kstat_irqs on node 0
[ 15.426495] iwlagn 0000:03:00.0: irq 33 for MSI/MSI-X
[ 15.467570] usbcore: registered new interface driver snd-usb-audio
[ 15.485131] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.597452] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.639259] alloc irq_desc for 22 on node 0
[ 15.639262] alloc kstat_irqs on node 0
[ 15.639268] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.639318] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.830073] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 15.839426] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000
[ 15.882292] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 15.987676] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 16.019950] usb 5-1: configuration #1 chosen from 1 choice
[ 16.037202] cfg80211: World regulatory domain updated:
[ 16.037205] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.037207] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.037210] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.037212] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.037214] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.037216] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.048792] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 16.048903] usbcore: registered new interface driver btusb
[ 16.751108] EXT4-fs (sda2): barriers enabled
[ 16.753642] kjournald2 starting: pid 904, dev sda2:8, commit interval 5 seconds
[ 16.754354] EXT4-fs (sda2): internal journal on sda2:8
[ 16.754357] EXT4-fs (sda2): delayed allocation enabled
[ 16.754360] EXT4-fs: file extents enabled
[ 16.786441] EXT4-fs: mballoc enabled
[ 16.786458] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 17.819470] type=1505 audit(1259869370.533:12): operation="profile_replace" pid=1111 name=/usr/share/gdm/guest-session/Xsession
[ 17.899816] type=1505 audit(1259869370.613:13): operation="profile_replace" pid=1112 name=/sbin/dhclient3
[ 17.899897] type=1505 audit(1259869370.613:14): operation="profile_replace" pid=1112 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 17.899947] type=1505 audit(1259869370.613:15): operation="profile_replace" pid=1112 name=/usr/lib/connman/scripts/dhclient-script
[ 19.892479] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 20.103128] usplash:400 freeing invalid memtype fffffffffb000000-fffffffffbe00000
[ 20.160897] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[ 20.340875] Registered led device: iwl-phy0::radio
[ 20.340890] Registered led device: iwl-phy0::assoc
[ 20.340906] Registered led device: iwl-phy0::RX
[ 20.340924] Registered led device: iwl-phy0::TX
[ 20.440848] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.442152] r8169: eth0: link down
[ 20.442590] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.823264] type=1505 audit(1259869377.543:16): operation="profile_replace" pid=1114 name=/usr/bin/evince
[ 24.824106] type=1505 audit(1259869377.543:17): operation="profile_replace" pid=1114 name=/usr/bin/evince-previewer
[ 24.824655] type=1505 audit(1259869377.543:18): operation="profile_replace" pid=1114 name=/usr/bin/evince-thumbnailer
[ 24.987043] type=1505 audit(1259869377.703:19): operation="profile_replace" pid=1325 name=/usr/lib/cups/backend/cups-pdf
[ 24.987200] type=1505 audit(1259869377.703:20): operation="profile_replace" pid=1325 name=/usr/sbin/cupsd
[ 25.033048] type=1505 audit(1259869377.753:21): operation="profile_replace" pid=1326 name=/usr/sbin/tcpdump
[ 25.770329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.770332] Bluetooth: BNEP filters: protocol multicast
[ 25.803634] Bridge firewalling registered
[ 25.850725] ppdev: user-space parallel port driver
[ 984.700052] wlan0: authenticate with AP 00:1c:f0:6b:9c:30
[ 984.702156] wlan0: authenticated
[ 984.702162] wlan0: associate with AP 00:1c:f0:6b:9c:30
[ 984.706009] wlan0: RX AssocResp from 00:1c:f0:6b:9c:30 (capab=0x431 status=0 aid=2)
[ 984.706018] wlan0: associated
[ 984.711238] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 984.775051] Intel AES-NI instructions are not detected.
[ 984.857295] padlock: VIA PadLock not detected.
[ 994.740056] wlan0: no IPv6 routers present
[ 1155.243153] iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:1c:f0:6b:9c:30 tid = 0
[ 1727.323949] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1727.324110] CE: hpet increasing min_delta_ns to 22500 nsec
[ 1727.328503] CE: hpet increasing min_delta_ns to 33750 nsec
[ 1857.082450] CE: hpet increasing min_delta_ns to 50624 nsec