Hvordan bruges USB mp3 afspiller?

Det afhænger nok af hvordan enheden opfører sig. Hvis det er en simpel USB mass storrage så havde det nok ikke været et problem.
Jeg kan huske min gamle Creative Zen skulle have et program til at snakke med den, for at smide musik over. Man kunne ganske vist bruge den som ekstern opbevaringsmedie, men der igennem var der ikke adgang til hvor den ville have musikken.
Om Samsung gør det på en tilsvarende måde ved jeg så ikke.

"bruge den som ekstern opbevaringsmedie, men der igennem var der ikke adgang til hvor den ville have musikken." Ja, det er netop det, jeg gerne vil vide, hvordan man gør. .-) tak for svaret - håber en anden kan hjælpe mig endnu videre

Well, i den Zen micro jeg havde (egentligt har, men som ikke virker), var det en indstilling i afspillerens software :)

#2 Prøv med dmesg grep | sd som root og se om der er noget der kan referere til din afspiller. Så har du måske noget at sigte efter mht. fstab.

Som jeg allerede har nævnt, er jeg absolut på bar bund her, vil du godt se på udskriften her. Et sted står der vga+ 80x25, det kunne måske være en af afspillernes display? (sd kender distro ikke).

[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 522144) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 522144
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522144
[ 0.000000] On node 0 totalpages: 522144
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2287 pages used for memmap
[ 0.000000] HighMem zone: 290481 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fad20
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x09000625 MSFT 0x00000097) @ 0x7f7a0000
[ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x09000625 MSFT 0x00000097) @ 0x7f7a0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x09000625 MSFT 0x00000097) @ 0x7f7a0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x09000625 MSFT 0x00000097) @ 0x7f7ae040
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x09000625 MSFT 0x00000097) @ 0x7f7a4940
[ 0.000000] ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x02002026) @ 0x7f7a497c
[ 0.000000] ACPI: DSDT (v001 A0597 A0597001 0x00000001 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:80380000)
[ 0.000000] Detected 1866.788 MHz processor.
[ 25.783467] Built 1 zonelists. Total pages: 518065
[ 25.783471] Kernel command line: root=UUID=9bebf9b9-b6c5-44a3-849d-d582361b07d3 ro quiet splash locale=da_DK
[ 25.783612] mapped APIC to ffffd000 (fee00000)
[ 25.783614] mapped IOAPIC to ffffc000 (fec00000)
[ 25.783616] Enabling fast FPU save and restore... done.
[ 25.783619] Enabling unmasked SIMD FPU exception support... done.
[ 25.783626] Initializing CPU#0
[ 25.783673] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 25.784728] Console: colour VGA+ 80x25
[ 25.784937] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 25.785187] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 25.853305] Memory: 2059708k/2088576k available (1993k kernel code, 27660k reserved, 900k data, 328k init, 1171072k highmem)
[ 25.853314] virtual kernel memory layout:
[ 25.853315] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 25.853316] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 25.853317] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 25.853318] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 25.853319] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 25.853320] .data : 0xc02f24c9 - 0xc03d36d4 ( 900 kB)
[ 25.853321] .text : 0xc0100000 - 0xc02f24c9 (1993 kB)
[ 25.853324] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 25.931534] Calibrating delay using timer specific routine.. 3736.36 BogoMIPS (lpj=7472739)
[ 25.931569] Security Framework v1.0.0 initialized
[ 25.931575] SELinux: Disabled at boot.
[ 25.931589] Mount-cache hash table entries: 512
[ 25.931715] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
[ 25.931722] monitor/mwait feature present.
[ 25.931723] using mwait in idle threads.
[ 25.931727] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 25.931729] CPU: L2 cache: 4096K
[ 25.931732] CPU: Physical Processor ID: 0
[ 25.931733] CPU: Processor Core ID: 0
[ 25.931735] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001
[ 25.931743] Compat vDSO mapped to ffffe000.
[ 25.931747] Remapping vsyscall page to ffffe000
[ 25.931759] Checking 'hlt' instruction... OK.
[ 25.947615] SMP alternatives: switching to UP code
[ 25.947949] Early unpacking initramfs... done
[ 26.229136] ACPI: Core revision 20060707
[ 26.229392] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 26.242373] CPU0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
[ 26.242389] SMP alternatives: switching to SMP code
[ 26.242453] Booting processor 1/1 eip 3000
[ 26.253065] Initializing CPU#1
[ 26.331138] Calibrating delay using timer specific routine.. 3733.60 BogoMIPS (lpj=7467219)
[ 26.331144] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
[ 26.331148] monitor/mwait feature present.
[ 26.331151] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 26.331153] CPU: L2 cache: 4096K
[ 26.331156] CPU: Physical Processor ID: 0
[ 26.331157] CPU: Processor Core ID: 1
[ 26.331158] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001
[ 26.331783] CPU1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
[ 26.331800] Total of 2 processors activated (7469.97 BogoMIPS).
[ 26.331943] ENABLING IO-APIC IRQs
[ 26.332110] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 26.478997] checking TSC synchronization across 2 CPUs: passed.
[ 0.004000] Brought up 2 CPUs
[ 0.082281] migration_cost=40
[ 0.082511] Booting paravirtualized kernel on bare hardware
[ 0.082576] Time: 13:54:35 Date: 04/15/108
[ 0.082599] NET: Registered protocol family 16
[ 0.082669] EISA bus registered
[ 0.082673] ACPI: bus type pci registered
[ 0.082805] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.082807] PCI: Using configuration type 1
[ 0.082808] Setting up standard PCI resources
[ 0.092745] ACPI: Interpreter enabled
[ 0.092747] ACPI: Using IOAPIC for interrupt routing
[ 0.093599] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.093605] PCI: Probing PCI hardware (bus 00)
[ 0.093821] Boot video device is 0000:00:02.0
[ 0.094229] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.094232] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.094628] PCI: Transparent bridge - 0000:00:1e.0
[ 0.094659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.097036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.097302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.101496] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.101712] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.101928] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.102145] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.102360] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.102572] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.102787] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.103002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.103098] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.103106] pnp: PnP ACPI init
[ 0.105289] pnp: PnP ACPI: found 13 devices
[ 0.105293] PnPBIOS: Disabled by ACPI PNP
[ 0.105328] PCI: Using ACPI for IRQ routing
[ 0.105331] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.110620] NET: Registered protocol family 8
[ 0.110622] NET: Registered protocol family 20
[ 0.111231] pnp: 00:06: ioport range 0x290-0x297 has been reserved
[ 0.111480] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 0.111483] PCI: Bridge: 0000:00:1c.0
[ 0.111486] IO window: e000-efff
[ 0.111490] MEM window: dff00000-dfffffff
[ 0.111494] PREFETCH window: disabled.
[ 0.111498] PCI: Bridge: 0000:00:1e.0
[ 0.111500] IO window: d000-dfff
[ 0.111504] MEM window: dfe00000-dfefffff
[ 0.111507] PREFETCH window: disabled.
[ 0.111527] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.111532] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.111542] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.111563] NET: Registered protocol family 2
[ 0.148111] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.148188] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.148586] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.148783] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.148785] TCP reno registered
[ 0.160237] checking if image is initramfs... it is
[ 0.715586] Freeing initrd memory: 6787k freed
[ 0.716166] audit: initializing netlink socket (disabled)
[ 0.716181] audit(1210859675.484:1): initialized
[ 0.716267] highmem bounce pool size: 64 pages
[ 0.716341] VFS: Disk quotas dquot_6.5.1
[ 0.716359] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.716405] io scheduler noop registered
[ 0.716407] io scheduler anticipatory registered
[ 0.716409] io scheduler deadline registered
[ 0.716418] io scheduler cfq registered (default)
[ 0.716607] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.716644] assign_interrupt_mode Found MSI capability
[ 0.716646] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.716795] isapnp: Scanning for PnP cards...
[ 1.069462] isapnp: No Plug & Play device found
[ 1.088041] Real Time Clock Driver v1.12ac
[ 1.088085] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.088189] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.088666] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.088797] mice: PS/2 mouse device common for all mice
[ 1.089281] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.089414] input: Macintosh mouse button emulation as /class/input/input0
[ 1.089445] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.089448] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.089656] PNP: No PS/2 controller found. Probing ports directly.
[ 1.092279] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.092282] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.092352] EISA: Probing bus 0 at eisa.0
[ 1.092380] EISA: Detected 0 cards.
[ 1.122423] TCP cubic registered
[ 1.122431] NET: Registered protocol family 1
[ 1.122449] Starting balanced_irq
[ 1.122457] Using IPI No-Shortcut mode
[ 1.122544] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.122584] Magic number: 8:389:938
[ 1.122758] Freeing unused kernel memory: 328k freed
[ 1.122886] Time: tsc clocksource has been installed.
[ 2.314383] Capability LSM initialized
[ 2.346962] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
[ 2.347013] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.347176] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
[ 2.347207] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 2.687845] usbcore: registered new interface driver usbfs
[ 2.687865] usbcore: registered new interface driver hub
[ 2.687885] usbcore: registered new device driver usb
[ 2.700278] USB Universal Host Controller Interface driver v3.0
[ 2.700328] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 2.700338] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.700342] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.700431] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.700456] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000b880
[ 2.700550] usb usb1: configuration #1 chosen from 1 choice
[ 2.700571] hub 1-0:1.0: USB hub found
[ 2.700577] hub 1-0:1.0: 2 ports detected
[ 2.706926] ieee1394: Initialized config rom entry `ip1394'
[ 2.804396] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 2.804407] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.804411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.804439] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.804466] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bc00
[ 2.804555] usb usb2: configuration #1 chosen from 1 choice
[ 2.804576] hub 2-0:1.0: USB hub found
[ 2.804581] hub 2-0:1.0: 2 ports detected
[ 2.908972] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 2.908979] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.908983] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.909005] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.909033] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000c000
[ 2.909108] usb usb3: configuration #1 chosen from 1 choice
[ 2.909137] hub 3-0:1.0: USB hub found
[ 2.909142] hub 3-0:1.0: 2 ports detected
[ 3.013412] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
[ 3.013419] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.013423] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.013445] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.013470] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000c080
[ 3.013547] usb usb4: configuration #1 chosen from 1 choice
[ 3.013570] hub 4-0:1.0: USB hub found
[ 3.013576] hub 4-0:1.0: 2 ports detected
[ 3.041485] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 3.118361] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 3.171081] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[dfeff800-dfefffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.176122] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 17
[ 3.176132] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.176135] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.176159] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.176183] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.176188] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.176192] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xdfdffc00
[ 3.180080] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.181128] usb usb5: configuration #1 chosen from 1 choice
[ 3.181153] hub 5-0:1.0: USB hub found
[ 3.181158] hub 5-0:1.0: 8 ports detected
[ 3.183984] usb 1-1: device descriptor read/all, error -71
[ 3.287400] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 3.287418] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.287443] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 3.287613] eth0: RTL8168b/8111b at 0xf886e000, 00:18:f3:7c:4c:67, IRQ 16
[ 3.299405] SCSI subsystem initialized
[ 3.307594] libata version 2.20 loaded.
[ 3.308783] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.308794] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 3.308809] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.308840] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 3.308865] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 3.308881] scsi0 : ata_piix
[ 3.629290] ata1.00: ATAPI, max UDMA/66
[ 3.794772] ata1.00: configured for UDMA/66
[ 3.794778] scsi1 : ata_piix
[ 3.962501] ATA: abnormal status 0x7F on port 0x00010177
[ 3.963428] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7173A 1-01 PQ: 0 ANSI: 5
[ 3.964569] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.964586] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
[ 3.964598] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.964618] ata3: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 18
[ 3.964637] ata4: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 18
[ 3.964644] scsi2 : ata_piix
[ 3.987890] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 4.158026] usb 1-1: configuration #1 chosen from 1 choice
[ 4.163802] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 4.163806] ata3.00: ATA-7: ST3250620AS, 3.AAK, max UDMA/133
[ 4.163809] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.163983] hub 1-1:1.0: USB hub found
[ 4.165957] hub 1-1:1.0: 7 ports detected
[ 4.230364] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 4.230368] ata3.00: configured for UDMA/133
[ 4.230374] scsi3 : ata_piix
[ 4.397804] ATA: abnormal status 0x7F on port 0x0001c807
[ 4.397880] scsi 2:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 4.407226] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 4.407236] sda: Write Protect is off
[ 4.407238] sda: Mode Sense: 00 3a 00 00
[ 4.407251] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.407287] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 4.407295] sda: Write Protect is off
[ 4.407297] sda: Mode Sense: 00 3a 00 00
[ 4.407309] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.407312] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.414245] Uniform CD-ROM driver Revision: 3.20
[ 4.414278] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.428085] sda1 sda2 < sda5 sda6 sda7 > sda3
[ 4.462025] sd 2:0:0:0: Attached scsi disk sda
[ 4.465637] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.465732] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.467548] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e8bbbb]
[ 4.527624] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 4.689821] usb 4-1: configuration #1 chosen from 1 choice
[ 4.733054] Attempting manual resume
[ 4.733056] swsusp: Resume From Partition 8:7
[ 4.733058] PM: Checking swsusp image.
[ 4.733208] PM: Resume from disk failed.
[ 4.756543] kjournald starting. Commit interval 5 seconds
[ 4.756550] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.920171] usb 1-1.2: new low speed USB device using uhci_hcd and address 5
[ 5.215933] usb 1-1.2: configuration #1 chosen from 1 choice
[ 5.442631] usb 1-1.6: new low speed USB device using uhci_hcd and address 6
[ 5.595526] usb 1-1.6: configuration #1 chosen from 1 choice
[ 5.610470] usbcore: registered new interface driver hiddev
[ 5.614838] input: Generic USB Audio Device as /class/input/input1
[ 5.614848] input: USB HID v1.00 Device [Generic USB Audio Device ] on usb-0000:00:1d.3-1
[ 5.675471] input: Logitech HID compliant keyboard as /class/input/input2
[ 5.675478] input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.2
[ 5.794314] input: Logitech HID compliant keyboard as /class/input/input3
[ 5.794321] input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.2
[ 5.809304] input: A4Tech Wireless Battery Free Optical Mouse as /class/input/input4
[ 5.809325] input: USB HID v1.10 Mouse [A4Tech Wireless Battery Free Optical Mouse] on usb-0000:00:1d.0-1.6
[ 5.809334] usbcore: registered new interface driver usbhid
[ 5.809337] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 11.596279] r8169: eth0: link up
[ 11.596284] r8169: eth0: link up
[ 12.446338] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.447699] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.590280] input: PC Speaker as /class/input/input5
[ 12.624009] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.633170] agpgart: Detected an Intel 945G Chipset.
[ 12.634080] agpgart: Detected 7932K stolen memory.
[ 12.647479] agpgart: AGP aperture is 256M @ 0xc0000000
[ 12.953759] iTCO_vendor_support: vendor-support=0
[ 12.954661] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 12.954745] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 12.954779] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.963801] intel_rng: FWH not detected
[ 12.979070] NET: Registered protocol family 17
[ 12.998725] usbcore: registered new interface driver xpad
[ 12.998728] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 13.116861] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 13.116875] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.146203] usbcore: registered new interface driver snd-usb-audio
[ 13.623121] fuse init (API version 7.8)
[ 13.669149] lp: driver loaded but no devices found
[ 13.707258] Adding 5301408k swap on /dev/disk/by-uuid/4510f636-607d-49bc-a99d-2b0a807b2d3d. Priority:-1 extents:1 across:5301408k
[ 13.791466] EXT3 FS on sda3, internal journal
[ 13.994479] NET: Registered protocol family 10
[ 13.994562] lo: Disabled Privacy Extensions
[ 19.121072] input: Power Button (FF) as /class/input/input6
[ 19.121187] ACPI: Power Button (FF) [PWRF]
[ 19.121793] input: Power Button (CM) as /class/input/input7
[ 19.121895] ACPI: Power Button (CM) [PWRB]
[ 19.206688] ibm_acpi: ec object not found
[ 19.339548] No dock devices found.
[ 19.352439] Using specific hotkey driver
[ 19.469281] pcc_acpi: loading...
[ 24.303720] [drm] Initialized drm 1.1.0 20060810
[ 24.305062] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.305103] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 24.954670] ppdev: user-space parallel port driver
[ 25.536430] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 25.536434] apm: disabled - APM is not SMP safe.
[ 25.950028] Bluetooth: Core ver 2.11
[ 25.950332] NET: Registered protocol family 31
[ 25.950336] Bluetooth: HCI device and connection manager initialized
[ 25.950341] Bluetooth: HCI socket layer initialized
[ 25.976969] Bluetooth: L2CAP ver 2.8
[ 25.976973] Bluetooth: L2CAP socket layer initialized
[ 26.045170] Bluetooth: RFCOMM socket layer initialized
[ 26.045179] Bluetooth: RFCOMM TTY layer initialized
[ 26.045181] Bluetooth: RFCOMM ver 1.8
[ 38.446496] eth0: no IPv6 routers present
[ 663.934982] usb 1-1.5: new full speed USB device using uhci_hcd and address 7
[ 664.093898] usb 1-1.5: configuration #1 chosen from 1 choice
[ 664.174851] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
[ 664.174875] usbcore: registered new interface driver usblp
[ 664.174879] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 3660.366174] usb 5-5: new high speed USB device using ehci_hcd and address 4
[ 3660.499081] usb 5-5: configuration #1 chosen from 1 choice
[ 3660.575548] usbcore: registered new interface driver libusual
[ 3660.589126] Initializing USB Mass Storage driver...
[ 3660.589199] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3660.589249] usb-storage: device found at 4
[ 3660.589252] usbcore: registered new interface driver usb-storage
[ 3660.589255] USB Mass Storage support registered.
[ 3660.589257] usb-storage: waiting for device to settle before scanning
[ 3665.586340] usb-storage: device scan complete
[ 3665.586723] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
[ 3665.587945] SCSI device sdb: 501759 512-byte hdwr sectors (257 MB)
[ 3665.588573] sdb: Write Protect is off
[ 3665.588575] sdb: Mode Sense: 03 00 00 00
[ 3665.588577] sdb: assuming drive cache: write through
[ 3665.590816] SCSI device sdb: 501759 512-byte hdwr sectors (257 MB)
[ 3665.591441] sdb: Write Protect is off
[ 3665.591444] sdb: Mode Sense: 03 00 00 00
[ 3665.591446] sdb: assuming drive cache: write through
[ 3665.591448] sdb: sdb1
[ 3665.592500] sd 4:0:0:0: Attached scsi removable disk sdb
[ 3665.592537] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3675.723036] usb 5-6: new high speed USB device using ehci_hcd and address 5
[ 3675.855941] usb 5-6: configuration #1 chosen from 1 choice
[ 3675.856196] scsi5 : SCSI emulation for USB Mass Storage devices
[ 3675.856242] usb-storage: device found at 5
[ 3675.856245] usb-storage: waiting for device to settle before scanning
[ 3680.851549] usb-storage: device scan complete
[ 3680.851932] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
[ 3680.853279] SCSI device sdc: 501759 512-byte hdwr sectors (257 MB)
[ 3680.853903] sdc: Write Protect is off
[ 3680.853906] sdc: Mode Sense: 03 00 00 00
[ 3680.853908] sdc: assuming drive cache: write through
[ 3680.856024] SCSI device sdc: 501759 512-byte hdwr sectors (257 MB)
[ 3680.856649] sdc: Write Protect is off
[ 3680.856651] sdc: Mode Sense: 03 00 00 00
[ 3680.856653] sdc: assuming drive cache: write through
[ 3680.856655] sdc: sdc1
[ 3680.857581] sd 5:0:0:0: Attached scsi removable disk sdc
[ 3680.857618] sd 5:0:0:0: Attached scsi generic sg3 type 0
[16683.870148] usb 1-1.5: USB disconnect, address 7
[16683.870277] drivers/usb/class/usblp.c: usblp0: removed
[16843.427020] usb 5-5: USB disconnect, address 4
[16845.945149] usb 5-6: USB disconnect, address 5
[16860.199994] usb 5-5: new high speed USB device using ehci_hcd and address 6
[16860.332811] usb 5-5: configuration #1 chosen from 1 choice
[16975.845703] usb 5-6: new high speed USB device using ehci_hcd and address 7
[16975.978555] usb 5-6: configuration #1 chosen from 1 choice

#5 For hulen! Det var jo også forkert, det skal være dmesg | grep sd
Undskyld!!!

Men kan det tænkes de hver især er på 256MB for så vil jeg kigge på sdb1 og sdc1.

Hvad siger en
fdisk -l

Det gik langt bedre med returgodset fra dmesg | grep sd (se nedenfor).

"kan det tænkes de hver især er på 256MB for så vil jeg kigge på sdb1 og sdc1" nej så har Samsung i hvert fald snydt mig for de bør begge være på 4 GB .efter påskrift m.v. at regne.

Svar til #6
Respons:
~$ dmesg | grep sd
[ 4.700720] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 4.700730] sda: Write Protect is off
[ 4.700732] sda: Mode Sense: 00 3a 00 00
[ 4.700747] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.703871] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.703937] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 4.703945] sda: Write Protect is off
[ 4.703947] sda: Mode Sense: 00 3a 00 00
[ 4.703960] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.703964] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 4.758003] sd 2:0:0:0: Attached scsi disk sda
[ 14.412987] EXT3 FS on sda3, internal journal

Svar til #7
sudo fdisk -l

Password:

Disk /dev/sda: 250.0 Gb, 250059350016 byte
255 hoveder, 63 sektorer/spor, 30401 cylindre
Enheder = cylindre af 16065 * 512 = 8225280 byte

Enhed Opstart Start Slut Blokke Id System
/dev/sda1 1 108 867478+ 83 Linux
/dev/sda2 109 14945 119178202+ 5 Udvidet
/dev/sda3 * 14946 30401 124150320 83 Linux
/dev/sda5 109 1181 8618841 82 Linux swap / Solaris
/dev/sda6 1182 14285 105257848+ 83 Linux
/dev/sda7 14286 14945 5301418+ 82 Linux swap / Solaris

Spørgsmål til #6 og #7 og andre der forsøger at hjælpe mig
Til det foranstående har jeg hele vejen igennem brugt Ubuntu 7.04 som distro.
Jeg får knopper af Microsoft, men kan der være en ærlig distro af de mest kendte,
der ville være mere velegnet til at løse mine problemer? Her tænker jeg især på
Knoppix. I øjeblikket er jeg tvunget til at have en stump at harddisken afsat til XP.

#8 men sdb og sdc er nu væk, har du fjernet mp3 afspillerne?? Det kan jo også tænkes at de ikke bliver registreret korrekt størrelsesmæssigt, du kan jo prøve at se om du kan mounte sdb1 og sdc1.

Prøv med en Knoppix CD, det tager jo ikke andet end en genstart at se om det virker.

Ja, jeg har haft begge ude.

Respons:
mount: ifølge mtab er /dev/sdb1 allerede monteret som /media/STORE EKSTR

mount: kunne ikke finde sdc1 i /etc/fstab eller /etc/mtab

sdb1 er altså ud fra responsen den førnævnte eksterne harddisk. Hvad sdc1 er
kan jeg måske ikke få svar på, så mit humør er ikke i top i øjeblikket grundet tvungen XT (?) :-(

#10 når jeg skal mounte eksterne drev i Debian retter jeg selv fstab til. Har du prøvet at se hvad biblioteket /media/STORE EKSTR rent faktisk indholder??

# Jeg ved ikke hvad det er for en distro du prøver med, i det fleste nyere distros burde det blive mountet helt automatisk.
I min Fedora 9 har jeg skrevet skrev følgende for at finde ud af hvilken Samsung music players den kender.
cat /usr/share/hal/fdi/information/10freedesktop/10-usb-music-players.fdi | grep -A3 Samsung
Det giver følgende resultat





storage
--


storage
--


storage
--


storage
--


RECORDED/
--


storage
--


storage
--


storage

Jeg kan ikke finde dine på listen men du kan tilføje dine egen til den pågældende fil, cut & paste en section for den samsung som er tættest på din.

Du kan evt. hente en Fedora 9 LIve CD her og boot den og sætte musikafspilleren til og se om den ikke finder den automatisk.

Tak for din "store smøre" - der er da noget at tage fat i/på. Jeg vil prøve dine forslag - mit humør er allerede steget et par grader.

Det ser rigtig godt ud med den ene (Samsung YP-Z5). Den er fundet direkte i
Ubuntu 7.04 - Jeg har brugt Red Hat en del for nogle år siden og kender også
lidt til Fedora i tidligere versioner, men har længe alene brugt Debian og Ubuntu
- det sidste af hensyn til mit arbejde. Nu har jeg sat nedhentnigen af Fedora i gang - tak også for spejlet. Min anden mp3 afspiller er en YP-U3J. Den er vist ikke blevet
fundet.


~$ cat /usr/share/hal/fdi/information/10freedesktop/10-usb-music-players.fdi | grep -A3 Samsung




portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player

Undskyld jeg havde ikke set efter, hvad det var, der blev sendt af sted - håber det går bedre denne gang:

"
cat /usr/share/hal/fdi/information/10freedesktop/10-usb-music-players.fdi | grep -A3 Samsung




portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player
--


portable_audio_player
portable_audio_player
"