Hvordan finder jeg af om der er mulighed for flere ram i openSUSe 11.1

Hej,

Det afhænger helt af din hardware :).

Så du er nødt til at fremkomme med noget mere specifikt omkring denne!

Finder der ikke et program til Linux som f.eks everest til win ?

Den vil ikke kopiere alle mit hardwareinformationer med over

Jeg mener jeg har 512 mg sd ram installeret nu

Problemet med noget mere specifikt er at denne er samlet af flere forskellige dele og altså ikke har noget navn

Ved ikke om dette kan bruges til noget?




libhd version 15.20 (ia32)
using /var/lib/hardware
kernel version is 2.6
----- /proc/cmdline -----
root=/dev/disk/by-id/ata-SAMSUNG_SP0802N_S00JJ30X662131-part2 repair=1 resume=/dev/disk/by-id/ata-SAMSUNG_SP0802N_S00JJ30X662131-part1 splash=silent vga=0x31a
----- /proc/cmdline end -----
debug = 0xff7ffff7
probe = 0x0000138fc4aa17fcf9fffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +modem +modem.usb +parallel +parallel.lp +parallel.zip -isa -isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -bios.vram -bios.acpi -bios.ddc.ports=1 -bios.ddc.ports=2 -bios.ddc.ports=3 -bios.ddc.ports=4 -modules.pata -net.eeprom -max -lxrc)
shm: attached segment 9437188 at 0xb741f000
>> hal.1: read hal data
hal: connected to: :1.58
----- hal device list -----
0: udi = '/org/freedesktop/Hal/devices/ppdev_parport0_3'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'ppdev'
info.product = 'Parallel Port Device'
linux.subsystem = 'ppdev'
linux.device_file = '/dev/parport0'
info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0_3'
linux.sysfs_path = '/sys/devices/platform/parport_pc.888/ppdev/parport0'
info.category = 'ppdev'
info.parent = '/org/freedesktop/Hal/devices/platform_parport_pc_888'
info.capabilities = { 'ppdev' }

1: udi = '/org/freedesktop/Hal/devices/platform_parport_pc_888'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'platform'
info.product = 'Platform Device (parport_pc.888)'
linux.subsystem = 'platform'
info.udi = '/org/freedesktop/Hal/devices/platform_parport_pc_888'
platform.id = 'parport_pc.888'
linux.sysfs_path = '/sys/devices/platform/parport_pc.888'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.linux.driver = 'parport_pc'

2: udi = '/org/freedesktop/Hal/devices/ppdev_parport0_2'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'ppdev'
info.product = 'Parallel Port Device'
linux.subsystem = 'ppdev'
linux.device_file = '/dev/parport0'
info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0_2'
linux.sysfs_path = '/sys/devices/platform/parport_pc.888/ppdev/parport0'
info.category = 'ppdev'
info.parent = '/org/freedesktop/Hal/devices/platform_parport_pc_888'
info.capabilities = { 'ppdev' }

3: udi = '/org/freedesktop/Hal/devices/ppdev_parport0_1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'ppdev'
info.product = 'Parallel Port Device'
linux.subsystem = 'ppdev'
linux.device_file = '/dev/parport0'
info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0_1'
linux.sysfs_path = '/sys/devices/platform/parport_pc.888/ppdev/parport0'
info.category = 'ppdev'
info.parent = '/org/freedesktop/Hal/devices/platform_parport_pc_888'
info.capabilities = { 'ppdev' }

4: udi = '/org/freedesktop/Hal/devices/ppdev_parport0_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'ppdev'
info.product = 'Parallel Port Device'
linux.subsystem = 'ppdev'
linux.device_file = '/dev/parport0'
info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0_0'
linux.sysfs_path = '/sys/devices/platform/parport_pc.888/ppdev/parport0'
info.category = 'ppdev'
info.parent = '/org/freedesktop/Hal/devices/platform_parport_pc_888'
info.capabilities = { 'ppdev' }

5: udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'ppdev'
info.product = 'Parallel Port Device'
linux.subsystem = 'ppdev'
linux.device_file = '/dev/parport0'
info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
linux.sysfs_path = '/sys/devices/platform/parport_pc.888/ppdev/parport0'
info.category = 'ppdev'
info.parent = '/org/freedesktop/Hal/devices/platform_parport_pc_888'
info.capabilities = { 'ppdev' }

6: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_pcm_0_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/audio'
oss.device_file = '/dev/audio'
info.product = 'VIA 8235 OSS PCM Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/audio'
access_control.type = 'sound'
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_pcm_0_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
oss.card = 0 (0x0)
info.callouts.remove = { 'hal-acl-tool --remove-device' }
oss.card_id = 'VIA 8235 with ALC650E'
oss.device_id = 'VIA 8235'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/audio'
info.category = 'oss'
oss.type = 'pcm'
info.capabilities = { 'oss', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
oss.device = 0 (0x0)

7: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_pcm_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/dsp'
oss.device_file = '/dev/dsp'
info.product = 'VIA 8235 OSS PCM Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/dsp'
access_control.type = 'sound'
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_pcm_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
oss.card = 0 (0x0)
info.callouts.remove = { 'hal-acl-tool --remove-device' }
oss.card_id = 'VIA 8235 with ALC650E'
oss.device_id = 'VIA 8235'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/dsp'
info.category = 'oss'
oss.type = 'pcm'
info.capabilities = { 'oss', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
oss.device = 0 (0x0)

8: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_pcm_1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/adsp'
oss.device_file = '/dev/adsp'
info.product = 'VIA 8235 OSS PCM Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/adsp'
access_control.type = 'sound'
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_pcm_1'
info.callouts.add = { 'hal-acl-tool --add-device' }
oss.card = 0 (0x0)
info.callouts.remove = { 'hal-acl-tool --remove-device' }
oss.card_id = 'VIA 8235 with ALC650E'
oss.device_id = 'VIA 8235'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/adsp'
info.category = 'oss'
oss.type = 'pcm'
info.capabilities = { 'oss', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
oss.device = 1 (0x1)

9: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_oss_pcm_0_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/audio1'
oss.device_file = '/dev/audio1'
info.product = 'AKM AK5370 OSS PCM Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/audio1'
access_control.type = 'sound'
oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_oss_pcm_0_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
oss.card = 1 (0x1)
info.callouts.remove = { 'hal-acl-tool --remove-device' }
oss.card_id = 'AKM AK5370'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/sound/card1/audio1'
info.category = 'oss'
oss.type = 'pcm'
info.capabilities = { 'oss', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
oss.device = 0 (0x0)

10: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_oss_pcm_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/dsp1'
oss.device_file = '/dev/dsp1'
info.product = 'AKM AK5370 OSS PCM Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/dsp1'
access_control.type = 'sound'
oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_oss_pcm_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
oss.card = 1 (0x1)
info.callouts.remove = { 'hal-acl-tool --remove-device' }
oss.card_id = 'AKM AK5370'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/sound/card1/dsp1'
info.category = 'oss'
oss.type = 'pcm'
info.capabilities = { 'oss', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
oss.device = 0 (0x0)

11: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_oss_mixer__1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/mixer1'
oss.device_file = '/dev/mixer1'
info.product = 'AKM AK5370 OSS Control Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/mixer1'
access_control.type = 'sound'
oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_oss_mixer__1'
info.callouts.add = { 'hal-acl-tool --add-device' }
oss.card = 1 (0x1)
info.callouts.remove = { 'hal-acl-tool --remove-device' }
oss.card_id = 'AKM AK5370'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/sound/card1/mixer1'
info.category = 'oss'
oss.type = 'mixer'
info.capabilities = { 'oss', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'

12: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_mixer__1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/mixer'
oss.device_file = '/dev/mixer'
info.product = 'VIA 8235 OSS Control Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/mixer'
access_control.type = 'sound'
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_oss_mixer__1'
info.callouts.add = { 'hal-acl-tool --add-device' }
oss.card = 0 (0x0)
info.callouts.remove = { 'hal-acl-tool --remove-device' }
oss.card_id = 'VIA 8235 with ALC650E'
oss.device_id = 'VIA 8235'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/mixer'
info.category = 'oss'
oss.type = 'mixer'
info.capabilities = { 'oss', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'

13: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/seq'
info.product = 'ALSA Sequencer Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/seq'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
linux.sysfs_path = '/sys/devices/virtual/sound/seq'
info.category = 'alsa'
alsa.device_file = '/dev/snd/seq'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.capabilities = { 'alsa', 'access_control' }
alsa.type = 'sequencer'

14: udi = '/org/freedesktop/Hal/devices/computer'
info.callouts.session_inactive = { 'hal-acl-tool --reconfigure' }
info.subsystem = 'unknown'
info.product = 'Computer'
info.udi = '/org/freedesktop/Hal/devices/computer'
system.kernel.name = 'Linux'
system.kernel.version = '2.6.27.37-0.1-pae'
system.kernel.machine = 'i686'
power_management.can_suspend = false
power_management.can_suspend_hybrid = false
info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
power_management.can_hibernate = true
system.hardware.primary_video.vendor = 4318 (0x10de)
system.hardware.primary_video.product = 272 (0x110)
system.hardware.serial = 'SYS-1234567890'
system.hardware.uuid = ''
system.board.serial = 'xxxxxxxxxxx'
system.firmware.vendor = 'Award Software, Inc.'
system.firmware.version = 'ASUS A7V333-X ACPI BIOS Revision 1002'
system.firmware.release_date = '10/22/2002'
system.hardware.vendor = 'System Manufacturer'
system.hardware.product = 'System Name'
system.hardware.version = 'System Version'
system.chassis.manufacturer = 'Chassis Manufacture'
system.board.product = 'A7V333-X'
system.board.version = 'REV 1.xx'
power_management.type = 'acpi'
system.board.vendor = 'ASUSTeK Computer INC.'
info.callouts.add = { 'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints' }
power_management.acpi.linux.version = '20080609'
system.chassis.type = 'Tower'
info.addons = { 'hald-addon-cpufreq', 'hald-addon-acpi' }
system.formfactor = 'desktop'
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave' }
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', 'i', '', '', '', 'b' }
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = { 'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save' }
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' }
power_management.is_powersave_set = false
info.callouts.session_add = { 'hal-acl-tool --reconfigure' }
info.callouts.session_remove = { 'hal-acl-tool --reconfigure' }
info.callouts.session_active = { 'hal-acl-tool --reconfigure' }

15: udi = '/org/freedesktop/Hal/devices/storage_model_DVDRW_SOHW_812S'
storage.media_check_enabled = true
storage.cdrom.dvdplusr = true
storage.automount_enabled_hint = true
storage.cdrom.dvdplusrw = true
storage.drive_type = 'cdrom'
storage.cdrom.dvdplusrwdl = false
storage.model = 'DVDRW SOHW-812S'
storage.cdrom.dvdplusrdl = false
storage.vendor = 'LITE-ON'
info.product = 'DVDRW SOHW-812S'
storage.cdrom.bd = false
storage.cdrom.bdr = false
info.udi = '/org/freedesktop/Hal/devices/storage_model_DVDRW_SOHW_812S'
info.vendor = 'LITE-ON'
storage.cdrom.bdre = false
storage.partitioning_scheme = ''
storage.lun = 0 (0x0)
storage.cdrom.hddvd = false
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVDRW_SOHW_812S'
storage.originating_device = '/org/freedesktop/Hal/devices/computer'
storage.cdrom.hddvdr = false
storage.removable.media_available = false
storage.cdrom.hddvdrw = false
storage.removable = true
linux.hotplug_type = 3 (0x3)
storage.cdrom.mo = false
storage.size = 0ull (0x0ull)
storage.cdrom.mrw = true
info.interfaces = { 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable' }
storage.hotpluggable = false
storage.cdrom.mrw_w = true
storage.requires_eject = true
storage.cdrom.support_media_changed = true
storage.cdrom.support_multisession = true
storage.removable.support_async_notification = false
storage.cdrom.read_speed = 7056 (0x1b90)
storage.cdrom.write_speed = 7056 (0x1b90)
storage.cdrom.write_speeds = { '7056', '5645', '4234', '2822', '2112', '1764', '1411', '706' }
org.freedesktop.Hal.Device.Storage.method_names = { 'Eject', 'CloseTray' }
org.freedesktop.Hal.Device.Storage.method_signatures = { 'as', 'as' }
org.freedesktop.Hal.Device.Storage.method_argnames = { 'extra_options', 'extra_options' }
org.freedesktop.Hal.Device.Storage.method_execpaths = { 'hal-storage-eject', 'hal-storage-closetray' }
info.category = 'storage'
info.capabilities = { 'storage', 'block', 'storage.cdrom', 'access_control', 'access_control' }
access_control.file = '/dev/sr1'
access_control.type = 'cdrom'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
info.addons = { 'hald-addon-storage' }
storage.cdrom.cdr = true
block.device = '/dev/sr1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1/target1:0:1/1:0:1:0/block/sr1'
storage.cdrom.cdrw = true
block.major = 11 (0xb)
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_0'
storage.cdrom.dvd = true
block.minor = 1 (0x1)
storage.cdrom.dvdr = true
block.is_volume = false
storage.cdrom.dvdrw = true
storage.cdrom.dvdrdl = false
storage.bus = 'pci'
storage.cdrom.dvdram = false
storage.no_partitions_hint = true

16: udi = '/org/freedesktop/Hal/devices/storage_model_CD_R___PX_W2410A'
storage.media_check_enabled = true
storage.cdrom.dvdplusr = false
storage.automount_enabled_hint = true
storage.cdrom.dvdplusrw = false
storage.drive_type = 'cdrom'
storage.cdrom.dvdplusrwdl = false
storage.model = 'CD-R PX-W2410A'
storage.cdrom.dvdplusrdl = false
storage.vendor = 'PLEXTOR'
info.product = 'CD-R PX-W2410A'
storage.cdrom.bd = false
storage.cdrom.bdr = false
info.udi = '/org/freedesktop/Hal/devices/storage_model_CD_R___PX_W2410A'
info.vendor = 'PLEXTOR'
storage.cdrom.bdre = false
storage.partitioning_scheme = ''
storage.lun = 0 (0x0)
storage.cdrom.hddvd = false
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD_R___PX_W2410A'
storage.originating_device = '/org/freedesktop/Hal/devices/computer'
storage.cdrom.hddvdr = false
storage.removable.media_available = false
storage.cdrom.hddvdrw = false
storage.removable = true
linux.hotplug_type = 3 (0x3)
storage.cdrom.mo = false
storage.size = 0ull (0x0ull)
storage.cdrom.mrw = true
info.interfaces = { 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable' }
storage.hotpluggable = false
storage.cdrom.mrw_w = true
storage.requires_eject = true
storage.cdrom.support_media_changed = true
storage.cdrom.support_multisession = true
storage.removable.support_async_notification = false
storage.cdrom.read_speed = 7056 (0x1b90)
storage.cdrom.write_speed = 4234 (0x108a)
storage.cdrom.write_speeds = { '4234', '3528', '2822', '2117', '706', '176' }
org.freedesktop.Hal.Device.Storage.method_names = { 'Eject', 'CloseTray' }
org.freedesktop.Hal.Device.Storage.method_signatures = { 'as', 'as' }
org.freedesktop.Hal.Device.Storage.method_argnames = { 'extra_options', 'extra_options' }
org.freedesktop.Hal.Device.Storage.method_execpaths = { 'hal-storage-eject', 'hal-storage-closetray' }
info.category = 'storage'
info.capabilities = { 'storage', 'block', 'storage.cdrom', 'access_control', 'access_control' }
access_control.file = '/dev/sr0'
access_control.type = 'cdrom'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
info.addons = { 'hald-addon-storage' }
storage.cdrom.cdr = true
block.device = '/dev/sr0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1/target1:0:0/1:0:0:0/block/sr0'
storage.cdrom.cdrw = true
block.major = 11 (0xb)
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0'
storage.cdrom.dvd = false
block.minor = 0 (0x0)
storage.cdrom.dvdr = false
block.is_volume = false
storage.cdrom.dvdrw = false
storage.cdrom.dvdrdl = false
storage.bus = 'pci'
storage.cdrom.dvdram = false
storage.no_partitions_hint = true

17: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'tty'
access_control.file = '/dev/ttyS1'
info.product = '16550A-compatible COM port'
linux.subsystem = 'tty'
linux.device_file = '/dev/ttyS1'
access_control.type = 'modem'
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'
info.callouts.add = { 'hal-acl-tool --add-device' }
serial.device = '/dev/ttyS1'
info.callouts.remove = { 'hal-acl-tool --remove-device' }
serial.port = 1 (0x1)
serial.type = 'platform'
linux.sysfs_path = '/sys/devices/pnp0/00:0b/tty/ttyS1'
info.category = 'serial'
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
info.capabilities = { 'serial', 'access_control' }

18: udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'
storage.media_check_enabled = false
storage.automount_enabled_hint = true
storage.drive_type = 'floppy'
storage.model = ''
storage.vendor = 'PC Floppy Drive'
info.product = 'PC Floppy Drive'
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'
info.vendor = ''
block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'
storage.originating_device = '/org/freedesktop/Hal/devices/platform_floppy_0'
storage.removable.media_available = false
storage.removable = true
linux.hotplug_type = 3 (0x3)
info.interfaces = { 'org.freedesktop.Hal.Device.Volume', 'org.freedesktop.Hal.Device.Storage.Removable' }
storage.size = 0ull (0x0ull)
storage.hotpluggable = false
storage.requires_eject = false
info.category = 'storage'
info.capabilities = { 'storage', 'block', 'access_control' }
access_control.file = '/dev/fd0'
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
access_control.type = 'removable-block'
info.callouts.add = { 'hal-acl-tool --add-device' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' }
info.addons = { 'hald-addon-storage' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid=' }
block.device = '/dev/fd0'
linux.sysfs_path = '/sys/devices/platform/floppy.0/block/fd0'
block.major = 2 (0x2)
info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0'
block.minor = 0 (0x0)
block.is_volume = false
storage.bus = 'platform'
storage.no_partitions_hint = true

19: udi = '/org/freedesktop/Hal/devices/volume_uuid_3bf9f5e3_d8f7_445b_84e8_fbff0887457d'
info.product = 'Volume (ext3)'
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_3bf9f5e3_d8f7_445b_84e8_fbff0887457d'
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
volume.fstype = 'ext3'
volume.fsusage = 'filesystem'
volume.fsversion = '1.0'
linux.hotplug_type = 3 (0x3)
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
volume.uuid = '3bf9f5e3-d8f7-445b-84e8-fbff0887457d'
volume.label = ''
volume.mount_point = '/home'
volume.is_mounted = true
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.number = 3 (0x3)
volume.block_size = 512 (0x200)
volume.num_blocks = 110205900ull (0x6919bccull)
volume.ignore = false
volume.size = 56425420800ull (0xd23379800ull)
volume.partition.start = 23631229440ull (0x58087f200ull)
info.category = 'volume'
volume.unmount.valid_options = { 'lazy' }
volume.partition.media_size = 80060424192ull (0x12a3f92000ull)
info.capabilities = { 'volume', 'block' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data=' }
block.device = '/dev/sda3'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0/target0:0:0/0:0:0:0/block/sda/sda3'
block.major = 8 (0x8)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
block.minor = 3 (0x3)
block.is_volume = true

20: udi = '/org/freedesktop/Hal/devices/volume_uuid_90aeb605_0edf_4b04_9bd9_8bdc8aed7f63'
info.product = 'Volume (ext3)'
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_90aeb605_0edf_4b04_9bd9_8bdc8aed7f63'
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
volume.fstype = 'ext3'
volume.fsusage = 'filesystem'
volume.fsversion = '1.0'
linux.hotplug_type = 3 (0x3)
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
volume.uuid = '90aeb605-0edf-4b04-9bd9-8bdc8aed7f63'
volume.label = ''
volume.mount_point = '/'
volume.is_mounted = true
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.number = 2 (0x2)
volume.block_size = 512 (0x200)
volume.num_blocks = 41945715ull (0x2800a73ull)
volume.ignore = false
volume.size = 21476206080ull (0x50014e600ull)
volume.partition.start = 2155023360ull (0x80730c00ull)
info.category = 'volume'
volume.unmount.valid_options = { 'lazy' }
volume.partition.media_size = 80060424192ull (0x12a3f92000ull)
info.capabilities = { 'volume', 'block' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data=' }
block.device = '/dev/sda2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0/target0:0:0/0:0:0:0/block/sda/sda2'
block.major = 8 (0x8)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
block.minor = 2 (0x2)
block.is_volume = true

21: udi = '/org/freedesktop/Hal/devices/volume_uuid_00ba29a3_c097_487f_a05a_d6560337bbbd'
linux.hotplug_type = 3 (0x3)
volume.linux.is_device_mapper = false
info.product = 'Volume (swap)'
volume.is_disc = false
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
volume.is_partition = true
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_00ba29a3_c097_487f_a05a_d6560337bbbd'
volume.fstype = 'swap'
volume.partition.number = 1 (0x1)
volume.fsusage = 'other'
volume.block_size = 512 (0x200)
volume.fsversion = '2'
volume.num_blocks = 4208967ull (0x403947ull)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0/target0:0:0/0:0:0:0/block/sda/sda1'
volume.uuid = '00ba29a3-c097-487f-a05a-d6560337bbbd'
info.category = 'volume'
volume.size = 2154991104ull (0x80728e00ull)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
block.device = '/dev/sda1'
volume.label = ''
info.capabilities = { 'volume', 'block' }
volume.partition.start = 32256ull (0x7e00ull)
block.major = 8 (0x8)
volume.mount_point = ''
volume.partition.media_size = 80060424192ull (0x12a3f92000ull)
block.minor = 1 (0x1)
volume.is_mounted = false
block.is_volume = true
volume.is_mounted_read_only = false

22: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'tty'
access_control.file = '/dev/ttyS0'
info.product = '16550A-compatible COM port'
linux.subsystem = 'tty'
linux.device_file = '/dev/ttyS0'
access_control.type = 'modem'
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
serial.device = '/dev/ttyS0'
info.callouts.remove = { 'hal-acl-tool --remove-device' }
serial.port = 0 (0x0)
serial.type = 'platform'
linux.sysfs_path = '/sys/devices/pnp0/00:0a/tty/ttyS0'
info.category = 'serial'
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.capabilities = { 'serial', 'access_control' }

23: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/timer'
info.product = 'ALSA Timer Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/timer'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
linux.sysfs_path = '/sys/devices/virtual/sound/timer'
info.category = 'alsa'
alsa.device_file = '/dev/snd/timer'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.capabilities = { 'alsa', 'access_control' }
alsa.type = 'timer'

24: udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
linux.hotplug_type = 3 (0x3)
storage.bus = 'pci'
storage.removable.media_available = true
storage.removable.media_size = 80060424192ull (0x12a3f92000ull)
storage.no_partitions_hint = false
storage.removable = false
info.product = 'SAMSUNG SP0802N'
storage.partitioning_scheme = 'mbr'
storage.media_check_enabled = false
storage.size = 80060424192ull (0x12a3f92000ull)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_SP0802NS00JJ30X662131'
storage.automount_enabled_hint = true
storage.hotpluggable = false
storage.drive_type = 'disk'
storage.requires_eject = false
storage.model = 'SAMSUNG SP0802N'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0/target0:0:0/0:0:0:0/block/sda'
storage.vendor = 'ATA'
info.category = 'storage'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'
block.device = '/dev/sda'
storage.serial = 'SATA_SAMSUNG_SP0802NS00JJ30X662131'
info.vendor = 'ATA'
info.capabilities = { 'storage', 'block' }
block.major = 8 (0x8)
storage.firmware_version = 'TK10'
block.minor = 0 (0x0)
storage.lun = 0 (0x0)
block.is_volume = false
storage.originating_device = '/org/freedesktop/Hal/devices/computer'

25: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'input'
access_control.file = '/dev/input/event1'
info.product = 'ImExPS/2 Logitech Explorer Mouse'
linux.subsystem = 'input'
linux.device_file = '/dev/input/event1'
input.x11_driver = 'evdev'
access_control.type = 'mouse'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input1/event1'
info.category = 'input'
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.capabilities = { 'input', 'input.mouse', 'access_control' }
input.device = '/dev/input/event1'
input.product = 'ImExPS/2 Logitech Explorer Mouse'

26: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_playback_1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/pcmC0D1p'
info.product = 'VIA 8235 ALSA Playback Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/pcmC0D1p'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_playback_1'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
alsa.device = 1 (0x1)
alsa.pcm_class = 'generic'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/pcmC0D1p'
info.category = 'alsa'
alsa.device_file = '/dev/snd/pcmC0D1p'
alsa.device_id = 'VIA 8235'
info.capabilities = { 'alsa', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.card = 0 (0x0)
alsa.type = 'playback'
alsa.card_id = 'VIA 8235 with ALC650E'

27: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_capture_1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/pcmC0D1c'
info.product = 'VIA 8235 ALSA Capture Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/pcmC0D1c'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_capture_1'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
alsa.device = 1 (0x1)
alsa.pcm_class = 'generic'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/pcmC0D1c'
info.category = 'alsa'
alsa.device_file = '/dev/snd/pcmC0D1c'
alsa.device_id = 'VIA 8235'
info.capabilities = { 'alsa', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.card = 0 (0x0)
alsa.type = 'capture'
alsa.card_id = 'VIA 8235 with ALC650E'

28: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_playback_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/pcmC0D0p'
info.product = 'VIA 8235 ALSA Playback Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/pcmC0D0p'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_playback_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
alsa.device = 0 (0x0)
alsa.pcm_class = 'generic'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/pcmC0D0p'
info.category = 'alsa'
alsa.device_file = '/dev/snd/pcmC0D0p'
alsa.device_id = 'VIA 8235'
info.capabilities = { 'alsa', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.card = 0 (0x0)
alsa.type = 'playback'
alsa.card_id = 'VIA 8235 with ALC650E'

29: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_capture_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/pcmC0D0c'
info.product = 'VIA 8235 ALSA Capture Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/pcmC0D0c'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_capture_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
alsa.device = 0 (0x0)
alsa.pcm_class = 'generic'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/pcmC0D0c'
info.category = 'alsa'
alsa.device_file = '/dev/snd/pcmC0D0c'
alsa.device_id = 'VIA 8235'
info.capabilities = { 'alsa', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.card = 0 (0x0)
alsa.type = 'capture'
alsa.card_id = 'VIA 8235 with ALC650E'

30: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_control__1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/controlC0'
info.product = 'VIA 8235 with ALC650E ALSA Control Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/controlC0'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0_alsa_control__1'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0/controlC0'
info.category = 'alsa'
alsa.device_file = '/dev/snd/controlC0'
info.capabilities = { 'alsa', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
alsa.card = 0 (0x0)
alsa.type = 'control'
alsa.card_id = 'VIA 8235 with ALC650E'

31: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_0_scsi_generic'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi_generic'
access_control.file = '/dev/sg2'
info.product = 'SCSI Generic Interface'
linux.subsystem = 'scsi_generic'
linux.device_file = '/dev/sg2'
access_control.type = 'cdrom'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_0_scsi_generic'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
scsi_generic.device = '/dev/sg2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1/target1:0:1/1:0:1:0/scsi_generic/sg2'
info.category = 'scsi_generic'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_0'
info.capabilities = { 'scsi_generic', 'access_control' }

32: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_scsi_generic'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi_generic'
access_control.file = '/dev/sg1'
info.product = 'SCSI Generic Interface'
linux.subsystem = 'scsi_generic'
linux.device_file = '/dev/sg1'
access_control.type = 'cdrom'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_scsi_generic'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
scsi_generic.device = '/dev/sg1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1/target1:0:0/1:0:0:0/scsi_generic/sg1'
info.category = 'scsi_generic'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0'
info.capabilities = { 'scsi_generic', 'access_control' }

33: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_alsa_capture_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/pcmC1D0c'
info.product = 'USB Audio ALSA Capture Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/pcmC1D0c'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_alsa_capture_0'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
alsa.device = 0 (0x0)
alsa.pcm_class = 'generic'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/sound/card1/pcmC1D0c'
info.category = 'alsa'
alsa.device_file = '/dev/snd/pcmC1D0c'
alsa.device_id = 'USB Audio'
info.capabilities = { 'alsa', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
alsa.originating_device = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
alsa.card = 1 (0x1)
alsa.type = 'capture'
alsa.card_id = 'AKM AK5370'

34: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_alsa_control__1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
access_control.file = '/dev/snd/controlC1'
info.product = 'AKM AK5370 ALSA Control Device'
linux.subsystem = 'sound'
linux.device_file = '/dev/snd/controlC1'
access_control.type = 'sound'
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0_alsa_control__1'
info.callouts.add = { 'hal-acl-tool --add-device' }
info.callouts.remove = { 'hal-acl-tool --remove-device' }
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/sound/card1/controlC1'
info.category = 'alsa'
alsa.device_file = '/dev/snd/controlC1'
info.capabilities = { 'alsa', 'access_control' }
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
alsa.originating_device = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
alsa.card = 1 (0x1)
alsa.type = 'control'
alsa.card_id = 'AKM AK5370'

35: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
linux.hotplug_type = 4 (0x4)
info.product = 'AMD Athlon(TM) XP 1600+'
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.category = 'processor'
linux.acpi_path = '/proc/acpi/processor/CPU0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.capabilities = { 'processor' }
linux.acpi_type = 1 (0x1)
processor.number = 0 (0x0)
processor.can_throttle = false

36: udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'net'
info.product = 'Loopback device Interface'
linux.subsystem = 'net'
info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
net.originating_device = '/org/freedesktop/Hal/devices/computer'
net.interface = 'lo'
net.address = '00:00:00:00:00:00'
info.category = 'net.loopback'
linux.sysfs_path = '/sys/devices/virtual/net/lo'
net.linux.ifindex = 1 (0x1)
info.parent = '/org/freedesktop/Hal/devices/computer'
info.capabilities = { 'net', 'net.loopback' }
net.arp_proto_hw_id = 772 (0x304)

37: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'input'
info.product = 'PC Speaker'
linux.subsystem = 'input'
linux.device_file = '/dev/input/event4'
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input4/event4'
info.category = 'input'
input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.capabilities = { 'input' }
input.device = '/dev/input/event4'
input.product = 'PC Speaker'

38: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'input'
input.xkb.variant = ''
info.product = 'AT Translated Set 2 keyboard'
linux.subsystem = 'input'
linux.device_file = '/dev/input/event0'
input.x11_driver = 'evdev'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = { 'hald-addon-input' }
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input0/event0'
info.category = 'input'
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.capabilities = { 'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button' }
input.xkb.rules = 'base'
input.device = '/dev/input/event0'
input.xkb.model = 'evdev'
input.product = 'AT Translated Set 2 keyboard'
input.xkb.layout = 'us'

39: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
info.product = 'VIA 8235 with ALC650E Sound Card'
linux.subsystem = 'sound'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_sound_card_0'
sound.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
sound.card = 0 (0x0)
sound.card_id = 'VIA 8235 with ALC650E'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5/sound/card0'
info.category = 'sound'
info.capabilities = { 'sound' }
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'

40: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_host'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi_host'
info.product = 'SCSI Host Adapter'
linux.subsystem = 'scsi_host'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_host'
scsi_host.host = 1 (0x1)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1/scsi_host/host1'
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0'
info.capabilities = { 'scsi_host' }

41: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0_scsi_generic'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi_generic'
info.product = 'SCSI Generic Interface'
linux.subsystem = 'scsi_generic'
linux.device_file = '/dev/sg0'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0_scsi_generic'
scsi_generic.device = '/dev/sg0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'
info.category = 'scsi_generic'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'
info.capabilities = { 'scsi_generic' }

42: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_host'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi_host'
info.product = 'SCSI Host Adapter'
linux.subsystem = 'scsi_host'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_host'
scsi_host.host = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0/scsi_host/host0'
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'
info.capabilities = { 'scsi_host' }

43: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'sound'
info.product = 'AKM AK5370 Sound Card'
linux.subsystem = 'sound'
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0_sound_card_0'
sound.originating_device = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0'
sound.card = 1 (0x1)
sound.card_id = 'AKM AK5370'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/sound/card1'
info.category = 'sound'
info.capabilities = { 'sound' }
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0'

44: udi = '/org/freedesktop/Hal/devices/net_00_e0_18_bf_58_49'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'net'
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = { '', '', 'b' }
info.product = 'Networking Interface'
linux.subsystem = 'net'
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = { '', '', 'enable' }
info.udi = '/org/freedesktop/Hal/devices/net_00_e0_18_bf_58_49'
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = { 'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable' }
net.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_4401'
net.interface = 'eth0'
net.address = '00:e0:18:bf:58:49'
info.category = 'net.80203'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ssb0:0/net/eth0'
net.linux.ifindex = 2 (0x2)
info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4401'
info.capabilities = { 'net', 'net.80203', 'wake_on_lan' }
net.arp_proto_hw_id = 1 (0x1)
net.80203.mac_address = 962487867465ull (0xe018bf5849ull)
info.interfaces = { 'org.freedesktop.Hal.Device.WakeOnLan' }
org.freedesktop.Hal.Device.WakeOnLan.method_names = { 'GetSupported', 'GetEnabled', 'SetEnabled' }

45: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false
linux.hotplug_type = 2 (0x2)
info.subsystem = 'input'
info.product = 'Power Button (CM)'
button.type = 'power'
linux.subsystem = 'input'
linux.device_file = '/dev/input/event3'
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
info.addons.singleton = { 'hald-addon-input' }
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3'
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.capabilities = { 'input', 'button' }
input.device = '/dev/input/event3'
input.product = 'Power Button (CM)'

46: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false
linux.hotplug_type = 2 (0x2)
info.subsystem = 'input'
info.product = 'Power Button (FF)'
button.type = 'power'
linux.subsystem = 'input'
linux.device_file = '/dev/input/event2'
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
info.addons.singleton = { 'hald-addon-input' }
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2'
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.capabilities = { 'input', 'button' }
input.device = '/dev/input/event2'
input.product = 'Power Button (FF)'

47: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
linux.sysfs_path = '/sys/devices/pnp0/00:0e'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0c02'
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
info.linux.driver = 'system'

48: udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'PS/2 Port for PS/2-style Mice'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
linux.sysfs_path = '/sys/devices/pnp0/00:0d'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0f13'
pnp.description = 'PS/2 Port for PS/2-style Mice'
info.linux.driver = 'i8042 aux'

49: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
linux.sysfs_path = '/sys/devices/pnp0/00:0c'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0303'
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
info.linux.driver = 'i8042 kbd'

50: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = '16550A-compatible COM port'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
linux.sysfs_path = '/sys/devices/pnp0/00:0b'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0501'
pnp.description = '16550A-compatible COM port'
info.linux.driver = 'serial'

51: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = '16550A-compatible COM port'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
linux.sysfs_path = '/sys/devices/pnp0/00:0a'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0501'
pnp.description = '16550A-compatible COM port'
info.linux.driver = 'serial'

52: udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'ECP printer port'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
linux.sysfs_path = '/sys/devices/pnp0/00:09'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0401'
pnp.description = 'ECP printer port'
info.linux.driver = 'parport_pc'

53: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'PC standard floppy disk controller'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
linux.sysfs_path = '/sys/devices/pnp0/00:08'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0700'
pnp.description = 'PC standard floppy disk controller'

54: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'Math Coprocessor'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
linux.sysfs_path = '/sys/devices/pnp0/00:07'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0c04'
pnp.description = 'Math Coprocessor'

55: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'AT-style speaker sound'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
linux.sysfs_path = '/sys/devices/pnp0/00:06'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0800'
pnp.description = 'AT-style speaker sound'

56: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'AT Real-Time Clock'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
linux.sysfs_path = '/sys/devices/pnp0/00:05'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0b00'
pnp.description = 'AT Real-Time Clock'
info.linux.driver = 'rtc_cmos'

57: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'AT DMA Controller'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
linux.sysfs_path = '/sys/devices/pnp0/00:04'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0200'
pnp.description = 'AT DMA Controller'

58: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
linux.sysfs_path = '/sys/devices/pnp0/00:03'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0c02'
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
info.linux.driver = 'system'

59: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
linux.sysfs_path = '/sys/devices/pnp0/00:02'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0c02'
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
info.linux.driver = 'system'

60: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'PCI Bus'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
linux.sysfs_path = '/sys/devices/pnp0/00:01'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0a03'
pnp.description = 'PCI Bus'

61: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pnp'
info.product = 'System Board'
linux.subsystem = 'pnp'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
linux.sysfs_path = '/sys/devices/pnp0/00:00'
info.parent = '/org/freedesktop/Hal/devices/computer'
pnp.id = 'PNP0c01'
pnp.description = 'System Board'
info.linux.driver = 'system'

62: udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'platform'
info.product = 'Platform Device (vesafb.0)'
linux.subsystem = 'platform'
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
platform.id = 'vesafb.0'
linux.sysfs_path = '/sys/devices/platform/vesafb.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.linux.driver = 'vesafb'

63: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'platform'
info.product = 'Platform Device (serial8250)'
linux.subsystem = 'platform'
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
platform.id = 'serial8250'
linux.sysfs_path = '/sys/devices/platform/serial8250'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.linux.driver = 'serial8250'

64: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'platform'
info.product = 'Platform Device (pcspkr)'
linux.subsystem = 'platform'
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
platform.id = 'pcspkr'
linux.sysfs_path = '/sys/devices/platform/pcspkr'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.linux.driver = 'pcspkr'

65: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'serio'
info.product = 'i8042 AUX port'
linux.subsystem = 'serio'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
serio.id = 'serio1'
linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
serio.description = 'i8042 AUX port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'psmouse'

66: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'serio'
info.product = 'i8042 KBD port'
linux.subsystem = 'serio'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
serio.id = 'serio0'
linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
serio.description = 'i8042 KBD port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'atkbd'

67: udi = '/org/freedesktop/Hal/devices/platform_i8042'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'platform'
info.product = 'Platform Device (i8042)'
linux.subsystem = 'platform'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
platform.id = 'i8042'
linux.sysfs_path = '/sys/devices/platform/i8042'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.linux.driver = 'i8042'

68: udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'platform'
info.product = 'Platform Device (floppy.0)'
linux.subsystem = 'platform'
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
platform.id = 'floppy.0'
linux.sysfs_path = '/sys/devices/platform/floppy.0'
info.parent = '/org/freedesktop/Hal/devices/computer'

69: udi = '/org/freedesktop/Hal/devices/pci_1106_3059'
pci.vendor_id = 4358 (0x1106)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32917 (0x8095)
info.product = 'VT8233/A/8235/8237 AC97 Audio Controller'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059'
pci.device_class = 4 (0x4)
pci.device_subclass = 1 (0x1)
pci.device_protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5'
pci.vendor = 'VIA Technologies, Inc.'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'VIA Technologies, Inc.'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5'
pci.product = 'VT8233/A/8235/8237 AC97 Audio Controller'
info.linux.driver = 'VIA 82xx Audio'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 12377 (0x3059)
pci.subsys_product = 'A7V8X Motherboard (Realtek ALC650 codec)'

70: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_0'
scsi.lun = 0 (0x0)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi'
info.product = 'SCSI Device'
scsi.model = 'DVDRW SOHW-812S'
linux.subsystem = 'scsi'
scsi.vendor = 'LITE-ON'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0_0'
scsi.type = 'cdrom'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1/target1:0:1/1:0:1:0'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0'
scsi.host = 1 (0x1)
scsi.bus = 0 (0x0)
info.linux.driver = 'sr'
scsi.target = 1 (0x1)

71: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0'
scsi.lun = 0 (0x0)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi'
info.product = 'SCSI Device'
scsi.model = 'CD-R PX-W2410A'
linux.subsystem = 'scsi'
scsi.vendor = 'PLEXTOR'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0_scsi_device_lun0'
scsi.type = 'cdrom'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1/target1:0:0/1:0:0:0'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0'
scsi.host = 1 (0x1)
scsi.bus = 0 (0x0)
info.linux.driver = 'sr'
scsi.target = 0 (0x0)

72: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi_host'
info.product = 'SCSI Host Adapter'
linux.subsystem = 'scsi_host'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0'
scsi_host.host = 1 (0x1)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host1'
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'
info.capabilities = { 'scsi_host' }

73: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'
scsi.lun = 0 (0x0)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi'
info.product = 'SCSI Device'
scsi.model = 'SAMSUNG SP0802N'
linux.subsystem = 'scsi'
scsi.vendor = 'ATA'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'
scsi.type = 'disk'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0/target0:0:0/0:0:0:0'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'
scsi.host = 0 (0x0)
scsi.bus = 0 (0x0)
info.linux.driver = 'sd'
scsi.target = 0 (0x0)

74: udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'
linux.hotplug_type = 2 (0x2)
info.subsystem = 'scsi_host'
info.product = 'SCSI Host Adapter'
linux.subsystem = 'scsi_host'
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'
scsi_host.host = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/host0'
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'
info.capabilities = { 'scsi_host' }

75: udi = '/org/freedesktop/Hal/devices/pci_1106_571'
pci.vendor_id = 4358 (0x1106)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32908 (0x808c)
info.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_571'
pci.device_class = 1 (0x1)
pci.device_subclass = 1 (0x1)
pci.device_protocol = 138 (0x8a)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1'
pci.vendor = 'VIA Technologies, Inc.'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'VIA Technologies, Inc.'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1'
pci.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'
info.linux.driver = 'pata_via'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 1393 (0x571)
pci.subsys_product = 'A7V8X / A7V333 motherboard'

76: udi = '/org/freedesktop/Hal/devices/pci_1106_3177'
pci.vendor_id = 4358 (0x1106)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32908 (0x808c)
info.product = 'VT8235 ISA Bridge'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3177'
pci.device_class = 6 (0x6)
pci.device_subclass = 1 (0x1)
pci.device_protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0'
pci.vendor = 'VIA Technologies, Inc.'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'VIA Technologies, Inc.'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0'
pci.product = 'VT8235 ISA Bridge'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 12663 (0x3177)
pci.subsys_product = 'A7V8X motherboard'

77: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_10_3_if0'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb4/4-0:1.0'
usb.device_revision_bcd = 518 (0x206)
usb.configuration_value = 1 (0x1)
usb.max_power = 0 (0x0)
info.subsystem = 'usb'
usb.num_configurations = 1 (0x1)
info.product = 'USB Hub Interface'
usb.num_ports = 6 (0x6)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_10_3_if0'
usb.num_interfaces = 1 (0x1)
usb.linux.device_number = 1 (0x1)
usb.device_class = 9 (0x9)
usb.serial = '0000:00:10.3'
usb.device_subclass = 0 (0x0)
linux.hotplug_type = 2 (0x2)
usb.speed = 480.000
linux.subsystem = 'usb'
usb.device_protocol = 0 (0x0)
usb.version = 2.00000
usb.vendor_id = 7531 (0x1d6b)
usb.is_self_powered = true
usb.product_id = 2 (0x2)
usb.can_wake_up = true
usb.interface.number = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.subclass = 0 (0x0)
usb.interface.protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb4/4-0:1.0'
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_10_3'
info.linux.driver = 'hub'
usb.vendor = 'Linux Foundation'
usb.bus_number = 4 (0x4)
usb.product = 'USB Hub Interface'

78: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_10_3'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linux Foundation'
usb_device.bus_number = 4 (0x4)
linux.hotplug_type = 2 (0x2)
usb_device.product = '2.0 root hub'
info.product = '2.0 root hub'
linux.subsystem = 'usb'
linux.device_file = '/dev/bus/usb/004/001'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb4'
usb_device.device_revision_bcd = 518 (0x206)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_10_3'
usb_device.configuration_value = 1 (0x1)
usb_device.max_power = 0 (0x0)
usb_device.num_configurations = 1 (0x1)
usb_device.num_ports = 6 (0x6)
usb_device.num_interfaces = 1 (0x1)
usb_device.linux.device_number = 1 (0x1)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb4'
usb_device.device_class = 9 (0x9)
usb_device.serial = '0000:00:10.3'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3104'
usb_device.device_subclass = 0 (0x0)
info.vendor = 'Linux Foundation'
usb_device.speed = 480.000
usb_device.device_protocol = 0 (0x0)
usb_device.version = 2.00000
info.linux.driver = 'usb'
usb_device.vendor_id = 7531 (0x1d6b)
usb_device.is_self_powered = true
usb_device.product_id = 2 (0x2)
usb_device.can_wake_up = true

79: udi = '/org/freedesktop/Hal/devices/pci_1106_3104'
pci.vendor_id = 4358 (0x1106)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32908 (0x808c)
info.product = 'USB 2.0'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3104'
pci.device_class = 12 (0xc)
pci.device_subclass = 3 (0x3)
pci.device_protocol = 32 (0x20)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3'
pci.vendor = 'VIA Technologies, Inc.'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'VIA Technologies, Inc.'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3'
pci.product = 'USB 2.0'
info.linux.driver = 'ehci_hcd'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 12548 (0x3104)
pci.subsys_product = 'A7V8X motherboard'

80: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_2_if0'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb3/3-0:1.0'
usb.device_revision_bcd = 518 (0x206)
usb.configuration_value = 1 (0x1)
usb.max_power = 0 (0x0)
info.subsystem = 'usb'
usb.num_configurations = 1 (0x1)
info.product = 'USB Hub Interface'
usb.num_ports = 2 (0x2)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_2_if0'
usb.num_interfaces = 1 (0x1)
usb.linux.device_number = 1 (0x1)
usb.device_class = 9 (0x9)
usb.serial = '0000:00:10.2'
usb.device_subclass = 0 (0x0)
linux.hotplug_type = 2 (0x2)
usb.speed = 12.0000
linux.subsystem = 'usb'
usb.device_protocol = 0 (0x0)
usb.version = 1.10000
usb.vendor_id = 7531 (0x1d6b)
usb.is_self_powered = true
usb.product_id = 1 (0x1)
usb.can_wake_up = true
usb.interface.number = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.subclass = 0 (0x0)
usb.interface.protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb3/3-0:1.0'
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_2'
info.linux.driver = 'hub'
usb.vendor = 'Linux Foundation'
usb.bus_number = 3 (0x3)
usb.product = 'USB Hub Interface'

81: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_2'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linux Foundation'
usb_device.bus_number = 3 (0x3)
linux.hotplug_type = 2 (0x2)
usb_device.product = '1.1 root hub'
info.product = '1.1 root hub'
linux.subsystem = 'usb'
linux.device_file = '/dev/bus/usb/003/001'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb3'
usb_device.device_revision_bcd = 518 (0x206)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_2'
usb_device.configuration_value = 1 (0x1)
usb_device.max_power = 0 (0x0)
usb_device.num_configurations = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.num_interfaces = 1 (0x1)
usb_device.linux.device_number = 1 (0x1)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb3'
usb_device.device_class = 9 (0x9)
usb_device.serial = '0000:00:10.2'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038_1'
usb_device.device_subclass = 0 (0x0)
info.vendor = 'Linux Foundation'
usb_device.speed = 12.0000
usb_device.device_protocol = 0 (0x0)
usb_device.version = 1.10000
info.linux.driver = 'usb'
usb_device.vendor_id = 7531 (0x1d6b)
usb_device.is_self_powered = true
usb_device.product_id = 1 (0x1)
usb_device.can_wake_up = true

82: udi = '/org/freedesktop/Hal/devices/pci_1106_3038_1'
pci.vendor_id = 4358 (0x1106)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32908 (0x808c)
info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038_1'
pci.device_class = 12 (0xc)
pci.device_subclass = 3 (0x3)
pci.device_protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2'
pci.vendor = 'VIA Technologies, Inc.'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'VIA Technologies, Inc.'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2'
pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
info.linux.driver = 'uhci_hcd'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 12344 (0x3038)
pci.subsys_product = 'VT6202 USB2.0 4 port controller'

83: udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial_if0'
info.subsystem = 'usb'
usb.num_interfaces = 1 (0x1)
usb.can_wake_up = true
linux.hotplug_type = 2 (0x2)
usb.linux.device_number = 5 (0x5)
usb.interface.number = 0 (0x0)
info.product = 'USB Hub Interface'
linux.subsystem = 'usb'
usb.vendor = 'Alcor Micro Corp.'
usb.device_class = 9 (0x9)
usb.interface.class = 9 (0x9)
info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial_if0'
usb.bus_number = 2 (0x2)
usb.interface.subclass = 0 (0x0)
usb.product = 'USB Hub Interface'
usb.device_subclass = 0 (0x0)
usb.interface.protocol = 0 (0x0)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0'
usb.speed = 12.0000
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0'
usb.device_revision_bcd = 786 (0x312)
usb.device_protocol = 0 (0x0)
info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial'
usb.configuration_value = 1 (0x1)
usb.version = 1.10000
usb.max_power = 100 (0x64)
usb.vendor_id = 1423 (0x58f)
usb.num_configurations = 1 (0x1)
usb.is_self_powered = true
info.linux.driver = 'hub'
usb.num_ports = 4 (0x4)
usb.product_id = 37460 (0x9254)

84: udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Alcor Micro Corp.'
usb_device.bus_number = 2 (0x2)
linux.hotplug_type = 2 (0x2)
usb_device.product = 'Hub'
info.product = 'Hub'
linux.subsystem = 'usb'
linux.device_file = '/dev/bus/usb/002/005'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-2'
usb_device.device_revision_bcd = 786 (0x312)
info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_9254_noserial'
usb_device.configuration_value = 1 (0x1)
usb_device.max_power = 100 (0x64)
usb_device.num_configurations = 1 (0x1)
usb_device.num_ports = 4 (0x4)
usb_device.num_interfaces = 1 (0x1)
usb_device.linux.device_number = 5 (0x5)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-2'
usb_device.device_class = 9 (0x9)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1'
usb_device.device_subclass = 0 (0x0)
info.vendor = 'Alcor Micro Corp.'
usb_device.speed = 12.0000
usb_device.device_protocol = 0 (0x0)
usb_device.version = 1.10000
info.linux.driver = 'usb'
usb_device.vendor_id = 1423 (0x58f)
usb_device.is_self_powered = true
usb_device.product_id = 37460 (0x9254)
usb_device.can_wake_up = true

85: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if1'
info.subsystem = 'usb'
usb.num_interfaces = 2 (0x2)
usb.can_wake_up = false
linux.hotplug_type = 2 (0x2)
usb.linux.device_number = 4 (0x4)
usb.interface.number = 1 (0x1)
info.product = 'USB Audio Interface'
linux.subsystem = 'usb'
usb.vendor = 'Asahi Kasei Microsystems Co., Ltd'
usb.device_class = 0 (0x0)
usb.interface.class = 1 (0x1)
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if1'
usb.bus_number = 2 (0x2)
usb.interface.subclass = 2 (0x2)
usb.product = 'USB Audio Interface'
usb.device_subclass = 0 (0x0)
usb.interface.protocol = 0 (0x0)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.1'
usb.speed = 12.0000
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.1'
usb.device_revision_bcd = 1 (0x1)
usb.device_protocol = 0 (0x0)
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial'
usb.configuration_value = 1 (0x1)
usb.version = 1.10000
usb.max_power = 90 (0x5a)
usb.vendor_id = 1366 (0x556)
usb.num_configurations = 1 (0x1)
usb.is_self_powered = false
info.linux.driver = 'snd-usb-audio'
usb.num_ports = 0 (0x0)
usb.product_id = 1 (0x1)

86: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0'
info.subsystem = 'usb'
usb.num_interfaces = 2 (0x2)
usb.can_wake_up = false
linux.hotplug_type = 2 (0x2)
usb.linux.device_number = 4 (0x4)
usb.interface.number = 0 (0x0)
info.product = 'USB Audio Interface'
linux.subsystem = 'usb'
usb.vendor = 'Asahi Kasei Microsystems Co., Ltd'
usb.device_class = 0 (0x0)
usb.interface.class = 1 (0x1)
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial_if0'
usb.bus_number = 2 (0x2)
usb.interface.subclass = 1 (0x1)
usb.product = 'USB Audio Interface'
usb.device_subclass = 0 (0x0)
usb.interface.protocol = 0 (0x0)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0'
usb.speed = 12.0000
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0'
usb.device_revision_bcd = 1 (0x1)
usb.device_protocol = 0 (0x0)
info.parent = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial'
usb.configuration_value = 1 (0x1)
usb.version = 1.10000
usb.max_power = 90 (0x5a)
usb.vendor_id = 1366 (0x556)
usb.num_configurations = 1 (0x1)
usb.is_self_powered = false
info.linux.driver = 'snd-usb-audio'
usb.num_ports = 0 (0x0)
usb.product_id = 1 (0x1)

87: udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Asahi Kasei Microsystems Co., Ltd'
usb_device.bus_number = 2 (0x2)
linux.hotplug_type = 2 (0x2)
usb_device.product = 'AK5370 I/F A/D Converter'
info.product = 'AK5370 I/F A/D Converter'
linux.subsystem = 'usb'
linux.device_file = '/dev/bus/usb/002/004'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1'
usb_device.device_revision_bcd = 1 (0x1)
info.udi = '/org/freedesktop/Hal/devices/usb_device_556_1_noserial'
usb_device.configuration_value = 1 (0x1)
usb_device.max_power = 90 (0x5a)
usb_device.num_configurations = 1 (0x1)
usb_device.num_ports = 0 (0x0)
usb_device.num_interfaces = 2 (0x2)
usb_device.linux.device_number = 4 (0x4)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-1'
usb_device.device_class = 0 (0x0)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1'
usb_device.device_subclass = 0 (0x0)
info.vendor = 'Asahi Kasei Microsystems Co., Ltd'
usb_device.speed = 12.0000
usb_device.device_protocol = 0 (0x0)
usb_device.version = 1.10000
info.linux.driver = 'usb'
usb_device.vendor_id = 1366 (0x556)
usb_device.is_self_powered = false
usb_device.product_id = 1 (0x1)
usb_device.can_wake_up = false

88: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1_if0'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-0:1.0'
usb.device_revision_bcd = 518 (0x206)
usb.configuration_value = 1 (0x1)
usb.max_power = 0 (0x0)
info.subsystem = 'usb'
usb.num_configurations = 1 (0x1)
info.product = 'USB Hub Interface'
usb.num_ports = 2 (0x2)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1_if0'
usb.num_interfaces = 1 (0x1)
usb.linux.device_number = 1 (0x1)
usb.device_class = 9 (0x9)
usb.serial = '0000:00:10.1'
usb.device_subclass = 0 (0x0)
linux.hotplug_type = 2 (0x2)
usb.speed = 12.0000
linux.subsystem = 'usb'
usb.device_protocol = 0 (0x0)
usb.version = 1.10000
usb.vendor_id = 7531 (0x1d6b)
usb.is_self_powered = true
usb.product_id = 1 (0x1)
usb.can_wake_up = true
usb.interface.number = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.subclass = 0 (0x0)
usb.interface.protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2/2-0:1.0'
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1'
info.linux.driver = 'hub'
usb.vendor = 'Linux Foundation'
usb.bus_number = 2 (0x2)
usb.product = 'USB Hub Interface'

89: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linux Foundation'
usb_device.bus_number = 2 (0x2)
linux.hotplug_type = 2 (0x2)
usb_device.product = '1.1 root hub'
info.product = '1.1 root hub'
linux.subsystem = 'usb'
linux.device_file = '/dev/bus/usb/002/001'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2'
usb_device.device_revision_bcd = 518 (0x206)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1'
usb_device.configuration_value = 1 (0x1)
usb_device.max_power = 0 (0x0)
usb_device.num_configurations = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.num_interfaces = 1 (0x1)
usb_device.linux.device_number = 1 (0x1)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb2'
usb_device.device_class = 9 (0x9)
usb_device.serial = '0000:00:10.1'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
usb_device.device_subclass = 0 (0x0)
info.vendor = 'Linux Foundation'
usb_device.speed = 12.0000
usb_device.device_protocol = 0 (0x0)
usb_device.version = 1.10000
info.linux.driver = 'usb'
usb_device.vendor_id = 7531 (0x1d6b)
usb_device.is_self_powered = true
usb_device.product_id = 1 (0x1)
usb_device.can_wake_up = true

90: udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
pci.vendor_id = 4358 (0x1106)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32908 (0x808c)
info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
pci.device_class = 12 (0xc)
pci.device_subclass = 3 (0x3)
pci.device_protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1'
pci.vendor = 'VIA Technologies, Inc.'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'VIA Technologies, Inc.'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1'
pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
info.linux.driver = 'uhci_hcd'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 12344 (0x3038)
pci.subsys_product = 'VT6202 USB2.0 4 port controller'

91: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_0_if0'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb1/1-0:1.0'
usb.device_revision_bcd = 518 (0x206)
usb.configuration_value = 1 (0x1)
usb.max_power = 0 (0x0)
info.subsystem = 'usb'
usb.num_configurations = 1 (0x1)
info.product = 'USB Hub Interface'
usb.num_ports = 2 (0x2)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_0_if0'
usb.num_interfaces = 1 (0x1)
usb.linux.device_number = 1 (0x1)
usb.device_class = 9 (0x9)
usb.serial = '0000:00:10.0'
usb.device_subclass = 0 (0x0)
linux.hotplug_type = 2 (0x2)
usb.speed = 12.0000
linux.subsystem = 'usb'
usb.device_protocol = 0 (0x0)
usb.version = 1.10000
usb.vendor_id = 7531 (0x1d6b)
usb.is_self_powered = true
usb.product_id = 1 (0x1)
usb.can_wake_up = true
usb.interface.number = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.subclass = 0 (0x0)
usb.interface.protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb1/1-0:1.0'
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_0'
info.linux.driver = 'hub'
usb.vendor = 'Linux Foundation'
usb.bus_number = 1 (0x1)
usb.product = 'USB Hub Interface'

92: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_0'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linux Foundation'
usb_device.bus_number = 1 (0x1)
linux.hotplug_type = 2 (0x2)
usb_device.product = '1.1 root hub'
info.product = '1.1 root hub'
linux.subsystem = 'usb'
linux.device_file = '/dev/bus/usb/001/001'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb1'
usb_device.device_revision_bcd = 518 (0x206)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_0'
usb_device.configuration_value = 1 (0x1)
usb_device.max_power = 0 (0x0)
usb_device.num_configurations = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.num_interfaces = 1 (0x1)
usb_device.linux.device_number = 1 (0x1)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb1'
usb_device.device_class = 9 (0x9)
usb_device.serial = '0000:00:10.0'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038'
usb_device.device_subclass = 0 (0x0)
info.vendor = 'Linux Foundation'
usb_device.speed = 12.0000
usb_device.device_protocol = 0 (0x0)
usb_device.version = 1.10000
info.linux.driver = 'usb'
usb_device.vendor_id = 7531 (0x1d6b)
usb_device.is_self_powered = true
usb_device.product_id = 1 (0x1)
usb_device.can_wake_up = true

93: udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
pci.vendor_id = 4358 (0x1106)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32908 (0x808c)
info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
pci.device_class = 12 (0xc)
pci.device_subclass = 3 (0x3)
pci.device_protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0'
pci.vendor = 'VIA Technologies, Inc.'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'VIA Technologies, Inc.'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0'
pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
info.linux.driver = 'uhci_hcd'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 12344 (0x3038)
pci.subsys_product = 'VT6202 USB2.0 4 port controller'

94: udi = '/org/freedesktop/Hal/devices/pci_14e4_4401'
pci.vendor_id = 5348 (0x14e4)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 32936 (0x80a8)
info.product = 'BCM4401 100Base-T'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4401'
pci.device_class = 2 (0x2)
pci.device_subclass = 0 (0x0)
pci.device_protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'
pci.vendor = 'Broadcom Corporation'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.vendor = 'Broadcom Corporation'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'
pci.product = 'BCM4401 100Base-T'
info.linux.driver = 'b44'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 17409 (0x4401)
pci.subsys_product = 'A7V8X motherboard'

95: udi = '/org/freedesktop/Hal/devices/pci_10de_110'
pci.vendor_id = 4318 (0x10de)
linux.hotplug_type = 2 (0x2)
info.subsystem = 'pci'
pci.subsys_product_id = 16445 (0x403d)
info.product = 'NV11 [GeForce2 MX/MX 400]'
linux.subsystem = 'pci'
pci.subsys_vendor_id = 4163 (0x1043)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_110'
pci.device_class = 3 (0x3)
pci.device_subclass = 0 (0x0)
pci.device_protocol = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
pci.vendor = 'nVidia Corporation'
info.parent = '/org/freedesktop/Hal/devices/pci_1106_b099'
info.vendor = 'nVidia Corporation'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
pci.product = 'NV11 [GeForce2 MX/MX 400]'
pci.subsys_vendor = 'ASUSTeK Computer Inc.'
pci.product_id = 272 (0x110)

Hej,

Hvilket bundkort er det? Det kan du normalt se under opstart.

I ca 1/2 sekund popper noget Asus op ved opstart
I handwareinformation står A7V8X motherboard. hvilket jeg gætter på er mit bundkort.
Lidt længere nede står også underproducent Asustek

Hej,

Du har et Asus bundkort A7V333-x og BIOS version 1002. Du kan opgradere din BIOS til version 1005.002 (beta) eller 1004.

Der er understøttelse af max 3 GB.
A7V333-X specifications summary
Socket A for AMD Athlon XP/Athlon/Duron up to 2.8 GHz+
CPU
333 MHz FSB Support
Northbridge: VIA KT333
Chipset
Southbridge: VIA VT8235
Front Side Bus (FSB) 333/266/200Mhz
Memory 3 x DDR DIMM Sockets
Max. 3 GB unbuffered PC2100/1600 non-ECC DDR SDRAM
(PC2700 Max. to 4 banks only)
Expansion slots 6 x PCI
1 x AGP 4X
IDE 2 x UltraDMA 133/100/66
Audio (optional) Realtek 6-channel CODEC
LAN (optional) BroadCom 10/100 Mbps Ethernet controller
USB 2.0 VT8235 built-in USB 2.0
6 x USB 2.0 ports
ASUS MyLogo
Special Features
ASUS EZ Flash
ASUS Q-Fan
Power Loss Restart
ASUS JumperFree
SFS (Stepless Frequency Selection)
ASUS C.O.P. (CPU Overheating Protection)
Back Panel I/O Ports 1 x Parallel
2 x Serial
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Audio I/O (on audio model only)
4 x USB 2.0
1 x RJ-45 Port (on LAN model only)
CPU/Chassis FAN connector
Internal I/O
20 pin ATX power connector
Connectors
IDE LED connector
Chassis Intrusion
Game port (on audio model only)
CD/AUX audio in (on audio model only)
Front panel audio connector (on audio model only)
1 x USB 2.0 connector supports additional 2 USB 2.0 ports
2Mb Flash ROM, ASUS JumperFree, Award BIOS, DMI2.0,
BIOS features
PnP, WfM2.0, BIOS 2.3, ASUS EZ Flash, ASUS MyLogo,
TCAV (Trend Chip Away Virus)
PCI 2.2, USB 2.0.
Industry standard
WfM2.0, DMI2.0, WOR, WOL, Chassis Intrusion
Manageability
ATX form factor: 12 in x 9.6 in
Form Factor
Device drivers
Support CD contents
ASUS PC Probe
Trend Microtm PC-cillin 2002 anti-virus software
ASUS LiveUpdate Utility
User’s manual
Accessories
Support CD
1 x UltraDMA 133/100/66 cable
FDD cable
I/O shield

http://www.motherboard.cz/mb/asus/A7V8X.htm

mon ikke det er dette ?

Men jeg ved jo ikke om der er sokler til det. Der er jeg nok nødt til at skille den ad.?

Jeg være glad for at vide , hvad det er man opnår ved at opgrade sin bios ?

Jeg har lidt problemer i bios med at tiden ikke bliver husket, selvom jeg lige har skiftet det 3 volt batteri til bundkortet. (også selvom jeg jeg husker at trykke F10)

Det er da bare at pille kabinet siden af. og læse hvad der står på hardwaren. Producent og modelnummer og så google.

Det får jeg jo ikke løst mit problem med at indstillingerne ikke bliver husket i bios, og ved stadig ikke hvad det er, man får ud af at opgradere sin bios ?

Hej,

Basic Input Output System (BIOS) er det der får de enkelte stykker komponenter på et bundkort til at virke.

Opgradering = Understøttelse af nyere CPU, enheder og fejlrettelser.

Tak for hjælpen til alle

Men siden du er så grøn i dette felt, så lad nu være med at opgradere BIOSen. Ikke reparere hvis spanden virker. For så risikerer du at komme til skade at din BIOS chip skal pilles af og sendes til flashing til et firma. Jeg fandt kun 1 butik på Falkoner alle, der kunne det. Det var dog nogle 6 år siden.

Du skal i hvert fald finde dig noget RAM af denne type:
184-pin DIMM 1GB DDR SDRAM PC2700
Og selvfølgelig tre stykker af den slags. Sig (søg, hvis du ikke besøger alleen) bare den ovenstående linje i butikken.

Jeg har nu prøvet med endnu et 3 volts batteri.

I butikken sagde de til mig, at problemet med at huske tiden, havde de oplevet før, og at problemet så var bundkorter.

Desværre ser det ud til at de har ret.

Tiden bliver ikke husket, selv med batteri nr 2

Så en trist slutning med en pc jeg har været glad for-(