Error 13: Invalid or unsupported executable format
Har forsøgt at installere Chakra på en af mine test partitioner, men lige meget hvad jeg gør, så får jeg følgende besked når jeg forsøger at tilgå Chakra fra min GRUB hovedmenu;
Error 13: Invalid or unsupported executable format
Min testpartition hedder /dev/sda7 og når jeg installerer Chakra, siger jeg at Chakras GRUB skal ligge på sda7.
Min GRUB hovedmenu (den er lidt stor);
------------------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## Graphical boot menu location
gfxmenu=/boot/gfxmenu/linuxmint.message
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda6 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,5)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Linux Mint 7 Gloria, kernel 2.6.28-16-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-16-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-16-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-16-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Linux Mint 7 Gloria, kernel 2.6.28-15-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-15-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-15-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-15-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Linux Mint 7 Gloria, kernel 2.6.28-13-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-13-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-13-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-13-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-13-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-13-generic
title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Linux Mint 7 Gloria, memtest86+
root (hd0,5)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows NT/2000/XP
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista (loader)
rootnoverify (hd0,1)
savedefault
makeactive
chainloader +1
title linux testing1
root (hd0,6)
chainloader +1
title linux testing2
root (hd0,7)
chainloader +1
title linux testing3
root (hd0,8)
chainloader +1
------------------------------------------------------------------------------------------
Og Chakras GRUB menu ser ud som følger;
------------------------------------------------------------------------------------------
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
#
#-*
# (1) Windows
# (0) Arch Linux
title Arch Linux
root (hd0,6)
kernel /boot/vmlinuz26 resume=/dev/disk/by-uuid/810bc187-74ff-4115-b4e2-88bab4ba7b40 root=/dev/disk/by-uuid/6b06ec2f-37b2-4647-850f-22be6b7361c2 ro
initrd /boot/kernel26.img
# (1) Arch Linux Fallback
title Arch Linux Fallback
root (hd0,6)
kernel /boot/vmlinuz26 resume=/dev/disk/by-uuid/810bc187-74ff-4115-b4e2-88bab4ba7b40 root=/dev/disk/by-uuid/6b06ec2f-37b2-4647-850f-22be6b7361c2 ro
initrd /boot/kernel26-fallback.img
------------------------------------------------------------------------------------------
Kan man ud af det her se hvad jeg gør galt?
LiveCD'en fungerer uden problemer.
Error 13: Invalid or unsupported executable format
Min testpartition hedder /dev/sda7 og når jeg installerer Chakra, siger jeg at Chakras GRUB skal ligge på sda7.
Min GRUB hovedmenu (den er lidt stor);
------------------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## Graphical boot menu location
gfxmenu=/boot/gfxmenu/linuxmint.message
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda6 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,5)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Linux Mint 7 Gloria, kernel 2.6.28-16-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-16-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-16-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-16-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Linux Mint 7 Gloria, kernel 2.6.28-15-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-15-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-15-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-15-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Linux Mint 7 Gloria, kernel 2.6.28-13-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-13-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-13-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-13-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-13-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-13-generic
title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda6 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Linux Mint 7 Gloria, memtest86+
root (hd0,5)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows NT/2000/XP
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista (loader)
rootnoverify (hd0,1)
savedefault
makeactive
chainloader +1
title linux testing1
root (hd0,6)
chainloader +1
title linux testing2
root (hd0,7)
chainloader +1
title linux testing3
root (hd0,8)
chainloader +1
------------------------------------------------------------------------------------------
Og Chakras GRUB menu ser ud som følger;
------------------------------------------------------------------------------------------
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
#
#-*
# (1) Windows
# (0) Arch Linux
title Arch Linux
root (hd0,6)
kernel /boot/vmlinuz26 resume=/dev/disk/by-uuid/810bc187-74ff-4115-b4e2-88bab4ba7b40 root=/dev/disk/by-uuid/6b06ec2f-37b2-4647-850f-22be6b7361c2 ro
initrd /boot/kernel26.img
# (1) Arch Linux Fallback
title Arch Linux Fallback
root (hd0,6)
kernel /boot/vmlinuz26 resume=/dev/disk/by-uuid/810bc187-74ff-4115-b4e2-88bab4ba7b40 root=/dev/disk/by-uuid/6b06ec2f-37b2-4647-850f-22be6b7361c2 ro
initrd /boot/kernel26-fallback.img
------------------------------------------------------------------------------------------
Kan man ud af det her se hvad jeg gør galt?
LiveCD'en fungerer uden problemer.
Kommentarer