SD-kort i SUSE 11
Hej Jeg skiftede lige fra suse 10.3 til suse 11.
Det er jo klart federe, bortset fra en mindre detalje. Jeg kan ikke læse SD-kort mere. Jeg bruger en Zepto 4040, og der er integreret SD-kort-læser i.
Der mangler sikkert en eller anden driver, men er ikke så velbevandret i sådan noget. Nogen der har et bud på hvad jeg mangler at installere?
Det er jo klart federe, bortset fra en mindre detalje. Jeg kan ikke læse SD-kort mere. Jeg bruger en Zepto 4040, og der er integreret SD-kort-læser i.
Der mangler sikkert en eller anden driver, men er ikke så velbevandret i sådan noget. Nogen der har et bud på hvad jeg mangler at installere?
Kommentarer4
Re: SD-kort i SUSE 11
Fortæller 'dmesg' dig noget interessant når du indsætter dit sd-kort?
.. og du ved godt at 11.1 udkommer om blot en god måned ikke?
http://counter.opensuse.org/11.1/small
hej
Damn... det var jeg ikke klar over. Det er jo lidt nedern at have skifte nu så.
Hey igen
SD-kortet kan igen ikke læses, og jeg kan ikke finde ud af problemet. Jeg smidder outputtet fra "dmesg" her:
Linux version 2.6.25.18-0.2-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-10-21 16:30:26 +0200BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data)
BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
495MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Entering add_active_range(0, 0, 126960) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 126960
HighMem 126960 -> 126960
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 126960
On node 0 totalpages: 126960
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 959 pages used for memmap
Normal zone: 121905 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000E6010, 0014 (r0 OID_00)
ACPI: RSDT 1EFFAA10, 0034 (r1 INSYDE RSDT_000 1 _CSI 10101)
ACPI: FACP 1EFFFAA0, 0074 (r1 ACER DCL51A 100 _CSI 10101)
ACPI: DSDT 1EFFAA50, 5047 (r1 ACER TM290 6 MSFT 100000E)
ACPI: FACS 1EFFFFC0, 0040
ACPI: BOOT 1EFFFB90, 0028 (r1 INSYDE BOOT_000 1 _CSI 10101)
ACPI: DBGP 1EFFFBC0, 0034 (r1 INSYDE DBGP_000 1 _CSI 10101)
ACPI: APIC 1EFFFB30, 005A (r1 INSYDE APIC_000 30303030 0000 30303030)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 1f000000:e0b80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125969
Kernel command line: root=/dev/disk/by-id/scsi-SATA_HTS541040G9AT00_MPB2A0X2C2VRLF-part2 resume=/dev/sda1 splash=silent vga=0x317
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1298.908 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 493256k/507840k available (1946k kernel code, 14056k reserved, 1631kdata, 256k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffdf2000 - 0xfffff000 (2100 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xdf800000 - 0xff3fe000 ( 507 MB)
lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB)
.init : 0xc0487000 - 0xc04c7000 ( 256 kB)
.data : 0xc02e6a9d - 0xc047e96c (1631 kB)
.text : 0xc0100000 - 0xc02e6a9d (1946 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 2599.91 BogoMIPS (lpj=5199824)
Security Framework initialized
AppArmor: AppArmor initialized
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 596 Objects with 54 Devices 193 Methods 21 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Celeron(R) M processor 1.30GHz stepping 06
Total of 1 processors activated (2599.91 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe97e4, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 2 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:..............................................................
Initialized 18/21 Regions 0/0 Fields 34/35 Buffers 10/17 Packages (605 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 0 _STA executions (examined 57 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1300-0x133f has been reserved
system 00:01: ioport range 0x200-0x20f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0xfe00-0xfe00 has been reserved
system 00:01: ioport range 0xff2c-0xff2f has been reserved
PCI: Bus 2, cardbus bridge: 0000:01:04.0
IO window: 0x0000c400-0x0000c4ff
IO window: 0x0000c800-0x0000c8ff
PREFETCH window: 0xa0000000-0xa3ffffff
MEM window: 0xe4000000-0xe7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-dfff
MEM window: 0xe0000000-0xefffffff
PREFETCH window: 0x00000000a0000000-0x00000000afffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5238k freed
Simple Boot Flag at 0x37 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1226670402.792:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
vesafb: framebuffer at 0xb0000000, mapped to 0xdf880000, using 6144k, total 16192k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 166113 bytes
bootsplash: ...found (1024x768, 154167 bytes, v3).
Console: switching to colour frame buffer device 124x44
Switched to high resolution mode on CPU 0
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 256k freed
Write protecting the kernel read-only data: 1444k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
Marking TSC unstable due to: TSC halts in idle.
ata1.00: ATA-6: HTS541040G9AT00, MB2OA60A, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA48
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input2
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input3
Clocksource tsc unstable (delta = -332884167 ns)
ata2.00: ATAPI: COMPAL TSB24H1 DVD/CD-RW, C012, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA HTS541040G9AT00 MB2O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM COMPAL TSB24H1 DVD/CDRW C012 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't supportDPO or FUA
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't supportDPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0080000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.18-0.2-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001600
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: unable to enumerate USB device on port 6
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001700
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
PM: Starting manual resume from disk
usb 4-2: new low speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: New USB device found, idVendor=062a, idProduct=0000
usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver hiddev
input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.103
iTCO_vendor_support: vendor-support=0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr0: scsi3-mmc drive: 1x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8
ACPI: Sleep Button (CM) [SLPB]
agpgart: Detected an Intel 855GM Chipset.
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xb0000000
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: AC Adapter [ACAD] (off-line)
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/input/input9
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: \_SB_.PCI0.IDEC.SECD.S_D0: found ejectable bay
ACPI: \_SB_.PCI0.IDEC.SECD.S_D0: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
NET: Registered protocol family 23
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227
smsc_superio_flat(): fir: 0x230, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
smsc_ircc_present: can't get sir_base of 0x2f8
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
wbsd 00:0a: activated
mmc0: W83L51xD id 7112 at 0x248 irq 5 FIFO PnP
intel8x0_measure_ac97_clock: measured 55417 usecs
intel8x0: clocking to 48000
Yenta: CardBus bridge found at 0000:01:04.0 [14c0:0012]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46
ppdev: user-space parallel port driver
Yenta: ISA IRQ mask 0x0c40, PCI irq 16
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
cs: IO port probe 0xc000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff
pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff
8139cp 0000:01:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:01:01.0: Try the "8139too" driver instead.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[e0000800-e0000fff]Max Packet=[2048] IR/IT contexts=[4/8]
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xdf87a000, 00:0f:b0:7d:32:68, IRQ 21
eth0: Identified 8139 chip type 'RTL-8101'
cs: IO port probe 0x100-0x3af: excluding 0x230-0x237
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Adding 1004020k swap on /dev/sda1. Priority:-1 extents:1 across:1004020k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f555c407917]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
fuse init (API version 7.9)
powernow: This module only works with AMD K7 CPUs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
ACPI: EC: non-query interrupt received, switching to interrupt mode
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.1 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 1
IA-32 Microcode Update Driver: v1.14a
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.64.4.105 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
mmc0: error -22 whilst initialising SDIO card
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.64.4.105 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.64.4.105 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
Håber at nogen kan hjælpe mig.
heja