Acer Aspire One og Huawei E1752

Jeg har langt om længe fundet ud af, hvordan jeg kan få Acer Aspire (Linpus) til at finde modemet vha. USB_Modeswitch
Nu vil jeg så gerne have en forbindelse oprettet, hvilket jeg har forsøgt vha. http://www.linuxin.dk/node/12108, men jeg får følgende output (selskabet er Telenor):
[user@localhost ~]$ sudo ./Documents/Net1.sh
wvdial: no process killed
./Documents/Net1.sh: line 14: ifconfig: command not found
./Documents/Net1.sh: line 15: ifconfig: command not found
./Documents/Net1.sh: line 18: rmmod: command not found
./Documents/Net1.sh: line 19: modprobe: command not found
./Documents/Net1.sh: line 25: ifconfig: command not found
--> WvDial: Internet dialer version 1.60
Gateway:
./Documents/Net1.sh: line 32: route: command not found
[user@localhost ~]$ --> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
NO CARRIER
--> No Carrier! Trying again.
Caught signal 15: Attempting to exit gracefully...
--> Disconnecting at Thu Sep 23 14:46:55 2010

Jeg bliver nødsaget til at afbrude forbindelsen med killall wvdial, da der ellers opstår et uendelig loop

wvdial.conf-filen ser således ud:
[Dialer Defaults]
Phone =
Username =
Password =
New PPPD = yes

[Dialer telenor]
Phone = *99#
APN = internet
Username = nn
Password = password
Stupid Mode = 1
Dial Command = ATDT
Modem = /dev/ttyUSB_utps_modem
Baud = 460800
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem


Net1.sh (som jeg har taget udgangspunkt i den anden tråd) ser således ud:
#!/bin/bash
# Wired device
WI='eth0'
# Wireless device
WL='ath0'
# Vendor and product
VE='0x12d1'
PR='0x1001'

# Kill old process
killall wvdial

# Kill network
ifconfig $WI down
ifconfig $WL down

# Uninstall and reinstall the driver
rmmod --force usbserial
modprobe usbserial vendor=$VE product=$PE

# Start the connection
wvdial telenor &

# Route the packets
A=`ifconfig | grep -A 2 ppp | grep P-t-P`
A1=`expr index "$A" P`
B=${A:$A1}
A2=`expr index "$B" M`
A2=$(($A2-6))
C=${B:5:$A2}
echo "Gateway: $C"
route add default gw "$C"