Kernel panic, Arch Linux, efter opdatering.

Prøv at bruge init=1 og regenerer dit image. Og måske skulle de prøve at geninstallere de forskellige klibc pakker.

Har prøvet init=1 det giver næsten samme besked som før:

Failed to execute /init
Failed to execute 1. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel.

Og jeg har lidt svært ved at foretage mig noget, da den jo næsten hænger med det samme.

Denne tråd http://bbs.archlinux.org/viewtopic.php?id=56971 foreslår, at at du chrooter ind i Arch og kører
mkinitcpio -p kernel26
Måske virker det?

#3
Mange tak, nu virker mit system igen.

Da jeg kørte 'mkinitcpio -p kernel26' kom den godt nok med 4 fejl om at nogle bestemte stier til 'klibc' ikke var at finde, men efter at have reinstalleret nogle af de 'klibc' som var at finde i pacman, og så køre 'mkinitcpio -p kernel26' igen, virkede det.

- - -
Men hvordan kan det egentlig være at denne kernel panic/klibc fejl kom?
Det ser jo ikke lige ud til at andre for denne fejl, og jeg har jo fået den på begge de pc´er hvor jeg har Arch Linux installeret. Er det muligvis mig der et sted har lavet en fejl i sin tid, eller vil du/i tror det er helt tilfældigt at det lige sker på begge mine installationer af Arch Linux?

Jeg finder det mærkeligt at du oplever dette på begge dine maskiner. Fejl kan opstå, men to på samme tid, for samme person? Jeg har selv to fuld opdaterede Arch maskiner, og ingen problemer med at boote.

Kan det være dine menu.lst filer der ikke er opdateret efter dine kernels er blevet udskiftet?

EDIT: Måske dine uuid's der laver fejl. Jeg retter altid dette til at bruge device maps istedet, da jeg finder dette mere stabil...

#1: Hvorfor i alverden foreslå init=1? mig bekendt er der ikke mange init-systemer der kalder sig selv for /bin/1 .. :-)

Du har muligvis installeret klibc forkert, da dette problem opstod:
http://bbs.archlinux.org/viewtopic.php?id=56431

#6
Nu du siger det. Men flere timers Warcraft har nu gjort mig noget så sløv i hovedet. Jeg har så spekuleret på runlevels i #1 og ja... :P

#5
Nej det har ikke noget med menu.lst at gøre. Det er simpelhænd kernel der ikke er blevet indlæst ordentligt på grund af en fejl med klibc, som jeg tror er kommet i forbindelse med tidligere opdateringer hvor der er sket nogle fejl på grund af de server jeg brugte i mirrorlist, lige pludselig ikke rigtigt virkede og gav en masse fejl og halve opdateringer.


EDIT: Nå på min Laptop var det nok bare at køre 'mkinitcpio -p kernel26' og så virkede det. Der var der ikke nogen fejl med 'klibc', mærkeligt...

Denne fejl er genopstået fra de døde, den optræder på min bærbare, og på en ny installeret pc, hvilket giver ingen mening ifølge sidste post indlæg der er fra 2008 men problemet er nok noget af det samme, den kommer med en lang fejlbesked og går i kernel panic...

den bærbare har kørt længe uden problemer men så efter nogle updates så begyndte den på det pjat, hvad kan det skyldes?

#10
Kan du prøve at tage et billede af fejlen? Det kan jo være det er muligt at tyde noget af det.

#11
det er meget ligesom det her billed: https://bugs.archlinux.org/task/22343?getfile=6215 når man slukker og tænde igen plejer det at forsvinde, nogle gange går der nogle dage før det kommer igen, nogle gange skal der tændes og slukkes 2 gange før det virker, jeg har godt nok aldrig oplevet noget lignende udover almindelig kernel panic.

Det ser godt nok underligt ud. Når maskinen starter "normalt" kan du så finde noget mistænkeligt i dmesg?

#13

det har jeg prøvet der er intet at se har kikket alle log filerne igennem for mistænklig aktivitet, der er intet at se... problemet kommer og går som en kronisk lidelse, det der undre mig mest er at den, også har haft gjort det på en clean installation, 2 gang maskinen blev genstartet.

Det synes jeg så ikke er så underligt. Om systemet er nyinstalleret eller godt brugt gør ikke nogen større forskel på Linux kernen og eftersom det sker lige i opstarten af systemet så har den også tvivlsomt læst ret meget af systemet.

Jeg sidder lidt og tænker om det kan være noget ACPI der driller i opstarten.

kunne bære jeg skelle se om det kan slås fra i bios, men mener ikke det er slået til.

#16
Jeg tænkte nu også mest på at du lige tilføjede acpi=off til din kerneparameter. Dette vil slå alt strømstyring fra så du må lige holde øje med at blæseren stadig er tændt. Men hvis det viser sig at være løsningen kan man yderlige gå ned og slå enkelte dele af ACPI fra så vi kan spore fejlen. Hvis det viser sig ikke at være ACPI der er problemet finder vi nok hurtigt ud af dette også. :)

317

jeg har udført både mkinitcpio -p kernel26 og sat acpi=off i grub hvilket ikke har hjulpet for den lavede samme nummer igen i dag... lang skummel kode, holdt power knappen nede og tændte igen og den startede fint.

det er først kommet efter de sidste 2-3 kernel opdateringer hvis det hjælper noget?

#18
Kan du komme med output fra dmesg. Jeg ved godt at du ikke mener der står noget specielt men jeg har desværre været ude for mange gange at der alligevel stod en meget alvorlig fejl i outputtet. :)

okay here goes den er lidt lang... men det er hvad jeg får ud af dmesg:

please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (50 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 000158fe8c] TEXT DATA BSS
#3 [0001590000 - 000159614d] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009fc00 - 00000fdad0] BIOS reserved
#7 [00000fdbf4 - 00000ff780] BIOS reserved
#8 [00000fdad0 - 00000fdbf4] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 0000292000] NEW RAMDISK
#13 [0001597000 - 0001598000] BOOTMEM
#14 [0001598000 - 0002d98000] BOOTMEM
#15 [000158fec0 - 000158fec4] BOOTMEM
#16 [000158ff00 - 000158ffc0] BOOTMEM
#17 [0001596180 - 00015961d4] BOOTMEM
#18 [0002d98000 - 0002d9b000] BOOTMEM
#19 [0001596200 - 00015962d0] BOOTMEM
#20 [0002d9b000 - 0002da7000] BOOTMEM
#21 [000158ffc0 - 000158ffe5] BOOTMEM
#22 [0001596300 - 0001596327] BOOTMEM
#23 [0001596340 - 0001596458] BOOTMEM
#24 [0001596480 - 00015964c0] BOOTMEM
#25 [00015964c0 - 0001596500] BOOTMEM
#26 [0001596500 - 0001596540] BOOTMEM
#27 [0001596540 - 0001596580] BOOTMEM
#28 [0001596580 - 00015965c0] BOOTMEM
#29 [00015965c0 - 0001596600] BOOTMEM
#30 [0001596600 - 0001596640] BOOTMEM
#31 [0001596640 - 0001596680] BOOTMEM
#32 [0001596680 - 00015966c0] BOOTMEM
#33 [00015966c0 - 00015966d0] BOOTMEM
#34 [0001596700 - 000159671a] BOOTMEM
#35 [0001596740 - 000159675a] BOOTMEM
#36 [0003000000 - 000300d000] BOOTMEM
#37 [0003100000 - 000310d000] BOOTMEM
#38 [0003200000 - 000320d000] BOOTMEM
#39 [0003300000 - 000330d000] BOOTMEM
#40 [0001596780 - 0001596784] BOOTMEM
#41 [00015967c0 - 00015967c4] BOOTMEM
#42 [0001596800 - 0001596810] BOOTMEM
#43 [0001596840 - 0001596850] BOOTMEM
#44 [0001596880 - 0001596920] BOOTMEM
#45 [0001596940 - 0001596988] BOOTMEM
#46 [0002da7000 - 0002dab000] BOOTMEM
#47 [0002dab000 - 0002e2b000] BOOTMEM
#48 [0002e2b000 - 0002e6b000] BOOTMEM
#49 [000330d000 - 000420c7e0] BOOTMEM
Initializing HighMem for node 0 (000377fe:000bffa8)
Memory: 3096576k/3145376k available (3104k kernel code, 48348k reserved, 1205k data, 428k init, 2236072k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1436000 - 0xc14a1000 ( 428 kB)
.data : 0xc1308226 - 0xc1435820 (1205 kB)
.text : 0xc1000000 - 0xc1308226 (3104 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1866.347 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3734.22 BogoMIPS (lpj=6221156)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7467.92 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT bffbe390 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT bffbe6b0 005FF (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005FF (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT bffbe2c0 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT bffbe620 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff]
pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff]
pci 0000:00:02.5: reg 20: [io 0xffe0-0xffef]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:03.0: reg 10: [mem 0xfddff000-0xfddfffff]
pci 0000:00:03.1: reg 10: [mem 0xfddfe000-0xfddfefff]
pci 0000:00:03.3: reg 10: [mem 0xfddfd000-0xfddfdfff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:05.0: reg 10: [io 0xc800-0xc807]
pci 0000:00:05.0: reg 14: [io 0xc400-0xc403]
pci 0000:00:05.0: reg 18: [io 0xc000-0xc007]
pci 0000:00:05.0: reg 1c: [io 0xbc00-0xbc03]
pci 0000:00:05.0: reg 20: [io 0xb800-0xb80f]
pci 0000:00:05.0: reg 24: [io 0xb400-0xb47f]
pci 0000:00:05.0: PME# supported from D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:0f.0: reg 10: [mem 0xfddf4000-0xfddf7fff]
pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xfdee0000-0xfdefffff]
pci 0000:01:00.0: reg 18: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
pci 0000:02:00.0: reg 10: [mem 0xfdff0000-0xfdffffff 64bit]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus 03-05]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xfe000000-0xfebfffff]
pci 0000:00:07.0: bridge window [mem 0xde000000-0xdfffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000bffa8000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: [io 0x0290-0x0297] has been reserved
system 00:06: [io 0x0c00-0x0c05] has been reserved
system 00:06: [io 0x0d00-0x0d05] has been reserved
system 00:06: [io 0x0480-0x048f] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x0c00-0x0c7f] could not be reserved
system 00:06: [io 0x2000-0x20fe] has been reserved
system 00:06: [mem 0xfff80000-0xffffffff] has been reserved
system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:06: [mem 0xffee0000-0xffefffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed3ffff] has been reserved
system 00:09: [io 0x0250-0x0253] has been reserved
system 00:09: [io 0x0256-0x025f] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0b: [mem 0xe0000000-0xffffffff] could not be reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 03-05]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xfe000000-0xfebfffff]
pci 0000:00:07.0: bridge window [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:03: resource 2 [mem 0xde000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1608k freed
Simple Boot Flag at 0x71 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1295171905.359:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1683
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:06.0: ACPI _OSC control granted for 0x19
pcieport 0000:00:07.0: ACPI _OSC control granted for 0x19
vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at ccdf:0004
vesafb: pmi: set display start = c00cce1e, set palette = c00cce6b
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1110
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:08: setting system clock to 2011-01-16 09:58:26 UTC (1295171906)
Initalizing network drop monitor service
Freeing unused kernel memory: 428k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[38]: starting version 165
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pata_acpi 0000:00:05.0: PCI INT A disabled
pata_sis 0000:00:02.5: version 0.5.2
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffe0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffe8 irq 15
sata_sis 0000:00:05.0: version 1.0
sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
scsi2 : sata_sis
scsi3 : sata_sis
ata3: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 17
ata4: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 17
ata1.00: ATAPI: MATSHITADVD-RAM UJ870PC, 1.00, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870PC 1.00 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
ata3.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[650]: starting version 165
fuse init (API version 7.15)
Linux agpgart interface v0.103
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (58 C)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: T12C model detected
asus_laptop: Backlight controlled by ACPI video driver
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
ACPI: AC Adapter [AC0] (on-line)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
HDA Intel 0000:00:0f.0: setting latency timer to 64
ACPI: Battery Slot [BAT0] (battery present)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input6
acpi device:0d: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0b/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
hda_codec: ALC660-VD: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input8
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: debug port 1
ehci_hcd 0000:00:03.3: irq 22, io mem 0xfddfd000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xfddff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xfddfe000
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1ce offMax=0x72a
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath5k 0000:02:00.0: setting latency timer to 64
ath5k 0000:02:00.0: registered as 'phy0'
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04711/0x200000/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Linux video capture interface: v2.00
usb 3-4: new low speed USB device using ohci_hcd and address 2
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-4/3-4:1.0/input/input10
generic-usb 0003:046D:C012.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-4/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
uvcvideo: Found UVC 1.00 device CNF7050 (04f2:b066)
input: CNF7050 as /devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Adding 2000088k swap on /dev/sda2. Priority:-1 extents:1 across:2000088k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
mtrr: type mismatch for f0000000,8000000 old: write-back new: write-combining
[drm] Initialized sis 1.3.0 20070626 for 0000:01:00.0 on minor 0
mtrr: type mismatch for c0000000,8000000 old: write-back new: write-combining
agpgart-sis 0000:00:00.0: AGP 3.5 bridge
agpgart-sis 0000:00:00.0: putting AGP V3 device into 4x mode
pci 0000:01:00.0: putting AGP V3 device into 4x mode
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:17:9a:69:6a:49 (try 1)
wlan0: authenticated
wlan0: associate with 00:17:9a:69:6a:49 (try 1)
wlan0: RX AssocResp from 00:17:9a:69:6a:49 (capab=0x431 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sda1): re-mounted. Opts: commit=0
EXT4-fs (sda3): re-mounted. Opts: commit=0
usb 1-3: new high speed USB device using ehci_hcd and address 4
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: Direct-Access Packard Bell Silver PQ: 0 ANSI: 2 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 34 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk

Hm jeg kan ikke se noget mistænkeligt. Jeg tror desværre ikke jeg har kompetance nok til at finde en løsning på problemet. :\

Du må have held og lykke med det.

Kan man rulle tilbage til et ældre kernel i arch? Du kunne jo prøve hvis det kan lade sig gøre..

#22
Det kan du ret nemt eftersom de enkelte PKGBUILD ligger i et SVN repo. Problemet er bare at det ikke ligefrem er en vedholdende løsning eftersom pakkerne løbende bliver inkompatible (fx vil det også kræve at nvidia driveren bliver lavet lidt om så den virker med den anden kerneversion).

Men hvis problemet er så stort at det er en god ide at bruge en del tid på gå en kerne tilbage så er det en løsning.

#21 ok det var en skam...

#22 tanken har haft strejfet mig for hvis ikke jeg husker meget galt så er det ca 2-3 kernel opdateringer tilbage ville være top nice hvis det problem ville forsvinde :)

Du er ikke alene med problemet. Jeg har det også på min Arch laptop. Der er en forum tråd om problemet her:
https://bbs.archlinux.org/viewtopic.php?pid=876526#p876526

Daniel_F har fundet en løsning ved at udkommentere en linje fra udev kildekoden. :)

jeg fik ved samme lejlighed ryddet op i alt det junk der var på maskinen og geninstallerede ved samme lejlighed, sjovt nok var fejlen der ved genstart efter installation, men fik den op og køre igen normalt og installerede en patched udgave af udev-165-1, jeg faldt over den i forummet, der her ikke været noget endnu hvilket er rimelig godt :-)

Det lyder godt at du fandt fejlen. Jeg undre mig slet ikke over at fejlen også forekommer ved geninstallationen eftersom det er meget begrænset hvad du kan rode med i Arch Linux som påvirker hvordan kernen kører ved start.

Men godt at fejlen blev lokaliseret til udev. Lad os håbe det er rettet i næste version.

lykken varede meget kort desværre... ville lige være 100% sikker da den gjorde det igen igår, og yep den gjorde det igen her til morgen... hvor er det bare nederen :-/