boot-tid 10.04->11.04 ((k)ubuntu)) [LØST]

ikke nogen i idé om hvad det kan være, men prøv at se om du kan finde noget i disse log filer.



/var/log/dmesg

/var/log/syslog

Problemet kunne bestemt ligne dette:

http://kubuntuforums.net/forums/index.php?topic=3116527.0



Dog får jeg ikke løsningen til at virke ...

Efter boot

dmesg > tmp.tmp





[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.38-8-generic-pae (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 (Ubuntu 2.6.38-8.42-generic-pae 2.6.38.2)

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)

[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)

[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)

[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)

[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] DMI 2.4 present.

[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F4 05/21/2009

[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-C7FFF write-protect

[ 0.000000] C8000-FFFFF uncachable

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back

[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back

[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back

[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable

[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back

[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] TOM2: 0000000130000000 aka 4864M

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)

[ 0.000000] found SMP MP-table at [c00f5570] f5570

[ 0.000000] initial memory mapped : 0 - 01e00000

[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000

[ 0.000000] 0000000000 - 0000200000 page 4k

[ 0.000000] 0000200000 - 0037a00000 page 2M

[ 0.000000] 0037a00000 - 0037bfe000 page 4k

[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000

[ 0.000000] RAMDISK: 35d46000 - 36e9b000

[ 0.000000] ACPI: RSDP 000f6f80 00014 (v00 GBT )

[ 0.000000] ACPI: RSDT cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: FACP cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: DSDT cfee30c0 07187 (v01 GBT GBTUACPI 00001000 MSFT 03000000)

[ 0.000000] ACPI: FACS cfee0000 00040

[ 0.000000] ACPI: HPET cfeea340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)

[ 0.000000] ACPI: MCFG cfeea380 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: TAMG cfeea3c0 0040A (v01 GBT GBT B0 5455312E BG?? 53450101)

[ 0.000000] ACPI: APIC cfeea280 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] 3972MB HIGHMEM available.

[ 0.000000] 891MB LOWMEM available.

[ 0.000000] mapped low ram: 0 - 37bfe000

[ 0.000000] low ram: 0 - 37bfe000

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] Normal 0x00001000 -> 0x00037bfe

[ 0.000000] HighMem 0x00037bfe -> 0x00130000

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[3] active PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009f

[ 0.000000] 0: 0x00000100 -> 0x000cfee0

[ 0.000000] 0: 0x00100000 -> 0x00130000

[ 0.000000] On node 0 totalpages: 1048175

[ 0.000000] free_area_init_node: node 0, pgdat c17babc0, node_mem_map f3746200

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 3951 pages, LIFO batch:0

[ 0.000000] Normal zone: 1752 pages used for memmap

[ 0.000000] Normal zone: 222502 pages, LIFO batch:31

[ 0.000000] HighMem zone: 7945 pages used for memmap

[ 0.000000] HighMem zone: 811993 pages, LIFO batch:31

[ 0.000000] Using APIC driver default

[ 0.000000] ACPI: PM-Timer IO Port: 0x4008

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000

[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000

[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u524288

[ 0.000000] pcpu-alloc: s32320 r0 d20928 u524288 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1 2 3

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038446

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic-pae root=UUID=94fa65a0-9c8c-407a-aa19-19ed790b5e24 ro quiet splash vt.handoff=7

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Initializing CPU#0

[ 0.000000] allocated 24903360 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] Initializing HighMem for node 0 (00037bfe:00130000)

[ 0.000000] Memory: 4101000k/4980736k available (5349k kernel code, 91700k reserved, 2599k data, 720k init, 3279752k highmem)

[ 0.000000] virtual kernel memory layout:

[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)

[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)

[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)

[ 0.000000] .init : 0xc17c4000 - 0xc1878000 ( 720 kB)

[ 0.000000] .data : 0xc1539545 - 0xc17c3540 (2599 kB)

[ 0.000000] .text : 0xc1000000 - 0xc1539545 (5349 kB)

[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.

[ 0.000000] RCU-based detection of stalled CPUs is disabled.

[ 0.000000] NR_IRQS:2304 nr_irqs:712 16

[ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000

[ 0.000000] spurious 8259A interrupt: IRQ7.

[ 0.000000] vt handoff: transparent VT on vt#7

[ 0.000000] Console: colour dummy device 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] hpet clockevent registered

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 3415.056 MHz processor.

[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.11 BogoMIPS (lpj=13660224)

[ 0.004006] pid_max: default: 32768 minimum: 301

[ 0.004023] Security Framework initialized

[ 0.004036] AppArmor: AppArmor initialized

[ 0.004037] Yama: becoming mindful.

[ 0.004082] Mount-cache hash table entries: 512

[ 0.004172] Initializing cgroup subsys ns

[ 0.004174] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.

[ 0.004177] Initializing cgroup subsys cpuacct

[ 0.004181] Initializing cgroup subsys memory

[ 0.004187] Initializing cgroup subsys devices

[ 0.004190] Initializing cgroup subsys freezer

[ 0.004191] Initializing cgroup subsys net_cls

[ 0.004193] Initializing cgroup subsys blkio

[ 0.004216] CPU: Physical Processor ID: 0

[ 0.004217] CPU: Processor Core ID: 0

[ 0.004220] mce: CPU supports 6 MCE banks

[ 0.004227] using C1E aware idle routine

[ 0.008569] ACPI: Core revision 20110112

[ 0.012025] ftrace: allocating 24250 entries in 48 pages

[ 0.016049] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.016517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.059460] CPU0: AMD Phenom(tm) II X2 550 Processor stepping 02

[ 0.060003] Performance Events: AMD PMU driver.

[ 0.060003] ... version: 0

[ 0.060003] ... bit width: 48

[ 0.060003] ... generic registers: 4

[ 0.060003] ... value mask: 0000ffffffffffff

[ 0.060003] ... max period: 00007fffffffffff

[ 0.060003] ... fixed-purpose events: 0

[ 0.060003] ... event mask: 000000000000000f

[ 0.060003] CPU 1 irqstacks, hard=f74b2000 soft=f74b4000

[ 0.060003] Booting Node 0, Processors #1

[ 0.008000] Initializing CPU#1

[ 0.148015] Brought up 2 CPUs

[ 0.148017] Total of 2 processors activated (13661.27 BogoMIPS).

[ 0.148692] devtmpfs: initialized

[ 0.148746] print_constraints: dummy:

[ 0.148767] Time: 18:13:02 Date: 05/05/11

[ 0.148791] NET: Registered protocol family 16

[ 0.148868] EISA bus registered

[ 0.148872] node 0 link 0: io port [b000, ffff]

[ 0.148827] Trying to unpack rootfs image as initramfs...

[ 0.148876] TOM: 00000000d0000000 aka 3328M

[ 0.148877] Fam 10h mmconf [e0000000, e00fffff]

[ 0.148879] node 0 link 0: mmio [a0000, bffff]

[ 0.148882] node 0 link 0: mmio [d0000000, dfffffff]

[ 0.148884] node 0 link 0: mmio [f0000000, fe02ffff]

[ 0.148885] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]

[ 0.148888] TOM2: 0000000130000000 aka 4864M

[ 0.148890] bus: [00, 04] on node 0 link 0

[ 0.148892] bus: 00 index 0 [io 0x0000-0xffff]

[ 0.148893] bus: 00 index 1 [mem 0x000a0000-0x000bffff]

[ 0.148895] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]

[ 0.148896] bus: 00 index 3 [mem 0xe0500000-0xffffffff]

[ 0.148898] bus: 00 index 4 [mem 0xe0100000-0xe04fffff]

[ 0.148899] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]

[ 0.148908] Extended Config Space enabled on 1 nodes

[ 0.148918] ACPI: bus type pci registered

[ 0.148963] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.148965] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[ 0.148967] PCI: Using MMCONFIG for extended config space

[ 0.148968] PCI: Using configuration type 1 for base access

[ 0.149494] bio: create slab at 0

[ 0.150087] ACPI: EC: Look up EC in DSDT

[ 0.156029] ACPI: Interpreter enabled

[ 0.156035] ACPI: (supports S0 S3 S4 S5)

[ 0.156048] ACPI: Using IOAPIC for interrupt routing

[ 0.313517] ACPI: No dock devices found.

[ 0.313519] HEST: Table not found.

[ 0.313522] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.313559] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.313630] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]

[ 0.313632] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]

[ 0.313633] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]

[ 0.313635] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]

[ 0.313637] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]

[ 0.313648] pci 0000:00:00.0: [1002:5958] type 0 class 0x000600

[ 0.313658] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]

[ 0.313685] pci 0000:00:03.0: [1002:5979] type 1 class 0x000604

[ 0.313706] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

[ 0.313708] pci 0000:00:03.0: PME# disabled

[ 0.313719] pci 0000:00:04.0: [1002:597a] type 1 class 0x000604

[ 0.313739] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold

[ 0.313741] pci 0000:00:04.0: PME# disabled

[ 0.313756] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604

[ 0.313777] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold

[ 0.313779] pci 0000:00:0a.0: PME# disabled

[ 0.313802] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101

[ 0.313820] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]

[ 0.313829] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]

[ 0.313837] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]

[ 0.313846] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]

[ 0.313855] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]

[ 0.313864] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]

[ 0.313882] pci 0000:00:11.0: set SATA to AHCI mode

[ 0.313913] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03

[ 0.313925] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]

[ 0.313984] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03

[ 0.313996] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]

[ 0.314059] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03

[ 0.314077] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]

[ 0.314142] pci 0000:00:12.2: supports D1 D2

[ 0.314143] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot

[ 0.314147] pci 0000:00:12.2: PME# disabled

[ 0.314166] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03

[ 0.314178] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]

[ 0.314236] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03

[ 0.314248] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]

[ 0.314312] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03

[ 0.314329] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]

[ 0.314394] pci 0000:00:13.2: supports D1 D2

[ 0.314396] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot

[ 0.314399] pci 0000:00:13.2: PME# disabled

[ 0.314421] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05

[ 0.314506] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101

[ 0.314521] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]

[ 0.314530] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]

[ 0.314538] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]

[ 0.314547] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]

[ 0.314555] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]

[ 0.314601] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403

[ 0.314621] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]

[ 0.314675] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold

[ 0.314678] pci 0000:00:14.2: PME# disabled

[ 0.314690] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601

[ 0.314759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604

[ 0.314795] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03

[ 0.314807] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]

[ 0.314868] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600

[ 0.314879] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600

[ 0.314889] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600

[ 0.314899] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600

[ 0.314910] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600

[ 0.314953] pci 0000:01:00.0: [1002:9490] type 0 class 0x000300

[ 0.314965] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.314974] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]

[ 0.314980] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]

[ 0.314991] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 0.315006] pci 0000:01:00.0: supports D1 D2

[ 0.315022] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403

[ 0.315034] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]

[ 0.315073] pci 0000:01:00.1: supports D1 D2

[ 0.320038] pci 0000:00:03.0: PCI bridge to [bus 01-01]

[ 0.320042] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]

[ 0.320045] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]

[ 0.320048] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.320082] pci 0000:02:00.0: [197b:2363] type 0 class 0x000101

[ 0.320145] pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]

[ 0.320178] pci 0000:02:00.0: PME# supported from D3hot

[ 0.320181] pci 0000:02:00.0: PME# disabled

[ 0.320203] pci 0000:02:00.1: [197b:2363] type 0 class 0x000101

[ 0.320220] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07]

[ 0.320229] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03]

[ 0.320239] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07]

[ 0.320249] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03]

[ 0.320258] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f]

[ 0.320308] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.320317] pci 0000:00:04.0: PCI bridge to [bus 02-02]

[ 0.320320] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]

[ 0.320322] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]

[ 0.320325] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]

[ 0.320354] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200

[ 0.320366] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]

[ 0.320385] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]

[ 0.320398] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]

[ 0.320406] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 0.320432] pci 0000:03:00.0: supports D1 D2

[ 0.320433] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.320436] pci 0000:03:00.0: PME# disabled

[ 0.328039] pci 0000:00:0a.0: PCI bridge to [bus 03-03]

[ 0.328043] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]

[ 0.328045] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]

[ 0.328048] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]

[ 0.328094] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00

[ 0.328116] pci 0000:04:0e.0: reg 10: [mem 0xfdbff000-0xfdbff7ff]

[ 0.328128] pci 0000:04:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]

[ 0.328206] pci 0000:04:0e.0: supports D1 D2

[ 0.328207] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot

[ 0.328212] pci 0000:04:0e.0: PME# disabled

[ 0.328244] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)

[ 0.328248] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]

[ 0.328251] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]

[ 0.328255] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]

[ 0.328257] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)

[ 0.328258] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)

[ 0.328260] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[ 0.328262] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)

[ 0.328263] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)

[ 0.328274] pci_bus 0000:00: on NUMA node 0

[ 0.328278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.328446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]

[ 0.328490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]

[ 0.328509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]

[ 0.328535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]

[ 0.328557] pci0000:00: Requesting ACPI _OSC control (0x1d)

[ 0.334706] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334733] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334758] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334782] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334830] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334855] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334879] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334956] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.334959] vgaarb: loaded

[ 0.335072] SCSI subsystem initialized

[ 0.335112] libata version 3.00 loaded.

[ 0.335138] usbcore: registered new interface driver usbfs

[ 0.335145] usbcore: registered new interface driver hub

[ 0.335161] usbcore: registered new device driver usb

[ 0.335277] wmi: Mapper loaded

[ 0.335278] PCI: Using ACPI for IRQ routing

[ 0.335280] PCI: pci_cache_line_size set to 64 bytes

[ 0.335286] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]

[ 0.335352] reserve RAM buffer: 000000000009f800 - 000000000009ffff

[ 0.335354] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff

[ 0.335414] NetLabel: Initializing

[ 0.335416] NetLabel: domain hash size = 128

[ 0.335417] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.335424] NetLabel: unlabeled traffic allowed by default

[ 0.335447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[ 0.335450] hpet0: 4 comparators, 32-bit 14.318180 MHz counter

[ 0.337038] Switching to clocksource hpet

[ 0.338553] Switched to NOHz mode on CPU #0

[ 0.338669] Switched to NOHz mode on CPU #1

[ 0.339984] AppArmor: AppArmor Filesystem Enabled

[ 0.340011] pnp: PnP ACPI init

[ 0.340020] ACPI: bus type pnp registered

[ 0.340069] pnp 00:00: [bus 00-ff]

[ 0.340072] pnp 00:00: [io 0x0cf8-0x0cff]

[ 0.340073] pnp 00:00: [io 0x0000-0x0cf7 window]

[ 0.340075] pnp 00:00: [io 0x0d00-0xffff window]

[ 0.340076] pnp 00:00: [mem 0x000a0000-0x000bffff window]

[ 0.340078] pnp 00:00: [mem 0x000c0000-0x000dffff window]

[ 0.340079] pnp 00:00: [mem 0xd0000000-0xfebfffff window]

[ 0.340108] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)

[ 0.340115] pnp 00:01: [io 0x0010-0x001f]

[ 0.340116] pnp 00:01: [io 0x0022-0x003f]

[ 0.340117] pnp 00:01: [io 0x0044-0x005f]

[ 0.340119] pnp 00:01: [io 0x0062-0x0063]

[ 0.340120] pnp 00:01: [io 0x0065-0x006f]

[ 0.340121] pnp 00:01: [io 0x0074-0x007f]

[ 0.340122] pnp 00:01: [io 0x0091-0x0093]

[ 0.340124] pnp 00:01: [io 0x00a2-0x00bf]

[ 0.340125] pnp 00:01: [io 0x00e0-0x00ef]

[ 0.340127] pnp 00:01: [io 0x04d0-0x04d1]

[ 0.340129] pnp 00:01: [io 0x0220-0x0225]

[ 0.340130] pnp 00:01: [io 0x0290-0x0294]

[ 0.340165] system 00:01: [io 0x04d0-0x04d1] has been reserved

[ 0.340167] system 00:01: [io 0x0220-0x0225] has been reserved

[ 0.340169] system 00:01: [io 0x0290-0x0294] has been reserved

[ 0.340171] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.421782] Freeing initrd memory: 17748k freed

[ 0.428112] pnp 00:02: [io 0x4100-0x411f]

[ 0.428115] pnp 00:02: [io 0x0228-0x022f]

[ 0.428116] pnp 00:02: [io 0x040b]

[ 0.428118] pnp 00:02: [io 0x04d6]

[ 0.428119] pnp 00:02: [io 0x0c00-0x0c01]

[ 0.428120] pnp 00:02: [io 0x0c14]

[ 0.428121] pnp 00:02: [io 0x0c50-0x0c52]

[ 0.428122] pnp 00:02: [io 0x0c6c-0x0c6d]

[ 0.428123] pnp 00:02: [io 0x0c6f]

[ 0.428125] pnp 00:02: [io 0x0cd0-0x0cd1]

[ 0.428126] pnp 00:02: [io 0x0cd2-0x0cd3]

[ 0.428127] pnp 00:02: [io 0x0cd4-0x0cdf]

[ 0.428128] pnp 00:02: [io 0x4000-0x40fe]

[ 0.428129] pnp 00:02: [io 0x4210-0x4217]

[ 0.428131] pnp 00:02: [io 0x0b00-0x0b0f]

[ 0.428132] pnp 00:02: [io 0x0b10-0x0b1f]

[ 0.428133] pnp 00:02: [io 0x0b20-0x0b3f]

[ 0.428135] pnp 00:02: [mem 0x00000000-0x00000fff window]

[ 0.428136] pnp 00:02: [mem 0xfee00400-0xfee00fff window]

[ 0.428142] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428168] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]

[ 0.428176] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]

[ 0.428213] system 00:02: [io 0x4100-0x411f] has been reserved

[ 0.428216] system 00:02: [io 0x0228-0x022f] has been reserved

[ 0.428217] system 00:02: [io 0x040b] has been reserved

[ 0.428219] system 00:02: [io 0x04d6] has been reserved

[ 0.428221] system 00:02: [io 0x0c00-0x0c01] has been reserved

[ 0.428222] system 00:02: [io 0x0c14] has been reserved

[ 0.428224] system 00:02: [io 0x0c50-0x0c52] has been reserved

[ 0.428225] system 00:02: [io 0x0c6c-0x0c6d] has been reserved

[ 0.428227] system 00:02: [io 0x0c6f] has been reserved

[ 0.428229] system 00:02: [io 0x0cd0-0x0cd1] has been reserved

[ 0.428230] system 00:02: [io 0x0cd2-0x0cd3] has been reserved

[ 0.428232] system 00:02: [io 0x0cd4-0x0cdf] has been reserved

[ 0.428234] system 00:02: [io 0x4000-0x40fe] has been reserved

[ 0.428235] system 00:02: [io 0x4210-0x4217] has been reserved

[ 0.428237] system 00:02: [io 0x0b00-0x0b0f] has been reserved

[ 0.428239] system 00:02: [io 0x0b10-0x0b1f] has been reserved

[ 0.428240] system 00:02: [io 0x0b20-0x0b3f] has been reserved

[ 0.428242] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved

[ 0.428245] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.428311] pnp 00:03: [dma 4]

[ 0.428312] pnp 00:03: [io 0x0000-0x000f]

[ 0.428313] pnp 00:03: [io 0x0080-0x0090]

[ 0.428315] pnp 00:03: [io 0x0094-0x009f]

[ 0.428316] pnp 00:03: [io 0x00c0-0x00df]

[ 0.428334] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)

[ 0.428358] pnp 00:04: [irq 0 disabled]

[ 0.428369] pnp 00:04: [irq 8]

[ 0.428370] pnp 00:04: [mem 0xfed00000-0xfed003ff]

[ 0.428388] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)

[ 0.428405] pnp 00:05: [io 0x0070-0x0073]

[ 0.428422] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.428427] pnp 00:06: [io 0x0061]

[ 0.428444] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)

[ 0.428449] pnp 00:07: [io 0x00f0-0x00ff]

[ 0.428455] pnp 00:07: [irq 13]

[ 0.428476] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 0.428574] pnp 00:08: [io 0x03f0-0x03f5]

[ 0.428575] pnp 00:08: [io 0x03f7]

[ 0.428582] pnp 00:08: [irq 6]

[ 0.428583] pnp 00:08: [dma 2]

[ 0.428614] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)

[ 0.428728] pnp 00:09: [io 0x03f8-0x03ff]

[ 0.428735] pnp 00:09: [irq 4]

[ 0.428769] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)

[ 0.428803] pnp 00:0a: [mem 0xe0000000-0xefffffff]

[ 0.428836] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved

[ 0.428838] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.428908] pnp 00:0b: [mem 0x000cf400-0x000cffff]

[ 0.428909] pnp 00:0b: [mem 0x000f0000-0x000f7fff]

[ 0.428910] pnp 00:0b: [mem 0x000f8000-0x000fbfff]

[ 0.428912] pnp 00:0b: [mem 0x000fc000-0x000fffff]

[ 0.428913] pnp 00:0b: [mem 0xcfee0000-0xcfefffff]

[ 0.428915] pnp 00:0b: [mem 0xffff0000-0xffffffff]

[ 0.428916] pnp 00:0b: [mem 0x00000000-0x0009ffff]

[ 0.428917] pnp 00:0b: [mem 0x00100000-0xcfedffff]

[ 0.428919] pnp 00:0b: [mem 0xfec00000-0xfec00fff]

[ 0.428920] pnp 00:0b: [mem 0xfee00000-0xfee00fff]

[ 0.428921] pnp 00:0b: [mem 0xfff80000-0xfffeffff]

[ 0.428924] pnp 00:0b: disabling [mem 0x000cf400-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428927] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428929] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428931] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428934] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428936] pnp 00:0b: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428976] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved

[ 0.428978] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved

[ 0.428980] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 0.428982] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved

[ 0.428984] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved

[ 0.428986] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 0.428998] pnp: PnP ACPI: found 12 devices

[ 0.428999] ACPI: ACPI bus type pnp unregistered

[ 0.429002] PnPBIOS: Disabled by ACPI PNP

[ 0.464518] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]

[ 0.464521] pci 0000:00:03.0: PCI bridge to [bus 01-01]

[ 0.464523] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]

[ 0.464525] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]

[ 0.464527] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.464530] pci 0000:00:04.0: PCI bridge to [bus 02-02]

[ 0.464532] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]

[ 0.464535] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]

[ 0.464537] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]

[ 0.464541] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]

[ 0.464542] pci 0000:00:0a.0: PCI bridge to [bus 03-03]

[ 0.464544] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]

[ 0.464546] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]

[ 0.464548] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]

[ 0.464551] pci 0000:00:14.4: PCI bridge to [bus 04-04]

[ 0.464554] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]

[ 0.464558] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]

[ 0.464562] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]

[ 0.464577] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[ 0.464580] pci 0000:00:03.0: setting latency timer to 64

[ 0.464588] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.464590] pci 0000:00:04.0: setting latency timer to 64

[ 0.464599] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 0.464601] pci 0000:00:0a.0: setting latency timer to 64

[ 0.464607] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]

[ 0.464609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]

[ 0.464610] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.464612] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]

[ 0.464613] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]

[ 0.464615] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]

[ 0.464616] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]

[ 0.464618] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.464620] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]

[ 0.464621] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]

[ 0.464623] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]

[ 0.464625] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]

[ 0.464626] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]

[ 0.464628] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]

[ 0.464630] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]

[ 0.464631] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]

[ 0.464633] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]

[ 0.464634] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]

[ 0.464636] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]

[ 0.464637] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.464639] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]

[ 0.464640] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]

[ 0.464665] NET: Registered protocol family 2

[ 0.464707] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.464850] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.465194] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.465367] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.465368] TCP reno registered

[ 0.465370] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.465377] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.465424] NET: Registered protocol family 1

[ 1.292035] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184

[ 1.376049] pci 0000:01:00.0: Boot video device

[ 1.376062] PCI: CLS 4 bytes, default 64

[ 1.376224] cpufreq-nforce2: No nForce2 chipset.

[ 1.376304] audit: initializing netlink socket (disabled)

[ 1.376311] type=2000 audit(1304619183.372:1): initialized

[ 1.382876] highmem bounce pool size: 64 pages

[ 1.382879] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 1.383941] VFS: Disk quotas dquot_6.5.2

[ 1.383979] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 1.384432] fuse init (API version 7.16)

[ 1.384497] msgmni has been set to 1638

[ 1.384710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 1.384738] io scheduler noop registered

[ 1.384740] io scheduler deadline registered

[ 1.384753] io scheduler cfq registered (default)

[ 1.384827] pcieport 0000:00:03.0: setting latency timer to 64

[ 1.384851] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X

[ 1.384880] pcieport 0000:00:04.0: setting latency timer to 64

[ 1.384897] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X

[ 1.384925] pcieport 0000:00:0a.0: setting latency timer to 64

[ 1.384942] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X

[ 1.384987] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 1.385001] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 1.385090] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0

[ 1.385093] ACPI: Power Button [PWRB]

[ 1.385124] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[ 1.385126] ACPI: Power Button [PWRF]

[ 1.385224] ACPI: acpi_idle registered with cpuidle

[ 1.412582] ERST: Table is not found!

[ 1.412618] isapnp: Scanning for PnP cards...

[ 1.412645] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[ 1.433073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.766346] isapnp: No Plug & Play device found

[ 1.860600] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.864197] Linux agpgart interface v0.103

[ 1.865048] brd: module loaded

[ 1.865364] loop: module loaded

[ 1.865415] i2c-core: driver [adp5520] using legacy suspend method

[ 1.865416] i2c-core: driver [adp5520] using legacy resume method

[ 1.865503] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.865534] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)

[ 1.865545] pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 1.865558] pata_acpi 0000:02:00.1: setting latency timer to 64

[ 1.865565] pata_acpi 0000:02:00.1: PCI INT B disabled

[ 1.865750] Fixed MDIO Bus: probed

[ 1.865768] PPP generic driver version 2.4.2

[ 1.865790] tun: Universal TUN/TAP device driver, 1.6

[ 1.865791] tun: (C) 1999-2004 Max Krasnyansky

[ 1.865840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.865850] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 1.865859] ehci_hcd 0000:00:12.2: EHCI Host Controller

[ 1.865881] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1

[ 1.865926] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[ 1.865937] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround

[ 1.865949] ehci_hcd 0000:00:12.2: debug port 1

[ 1.865974] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000

[ 1.876028] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00

[ 1.876115] hub 1-0:1.0: USB hub found

[ 1.876118] hub 1-0:1.0: 6 ports detected

[ 1.876178] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 1.876188] ehci_hcd 0000:00:13.2: EHCI Host Controller

[ 1.876213] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2

[ 1.876243] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[ 1.876256] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround

[ 1.876268] ehci_hcd 0000:00:13.2: debug port 1

[ 1.876291] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000

[ 1.888027] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00

[ 1.888118] hub 2-0:1.0: USB hub found

[ 1.888121] hub 2-0:1.0: 6 ports detected

[ 1.888175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.888186] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.888197] ohci_hcd 0000:00:12.0: OHCI Host Controller

[ 1.888218] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3

[ 1.888278] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000

[ 1.948080] hub 3-0:1.0: USB hub found

[ 1.948086] hub 3-0:1.0: 3 ports detected

[ 1.948136] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.948145] ohci_hcd 0000:00:12.1: OHCI Host Controller

[ 1.948168] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4

[ 1.952057] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000

[ 2.012082] hub 4-0:1.0: USB hub found

[ 2.012087] hub 4-0:1.0: 3 ports detected

[ 2.012137] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 2.012147] ohci_hcd 0000:00:13.0: OHCI Host Controller

[ 2.012169] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5

[ 2.016070] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000

[ 2.076090] hub 5-0:1.0: USB hub found

[ 2.076095] hub 5-0:1.0: 3 ports detected

[ 2.076146] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 2.076155] ohci_hcd 0000:00:13.1: OHCI Host Controller

[ 2.076177] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6

[ 2.076214] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000

[ 2.136122] hub 6-0:1.0: USB hub found

[ 2.136127] hub 6-0:1.0: 3 ports detected

[ 2.136178] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 2.136188] ohci_hcd 0000:00:14.5: OHCI Host Controller

[ 2.136209] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7

[ 2.136247] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000

[ 2.188028] usb 1-1: new high speed USB device using ehci_hcd and address 2

[ 2.196087] hub 7-0:1.0: USB hub found

[ 2.196092] hub 7-0:1.0: 2 ports detected

[ 2.196141] uhci_hcd: USB Universal Host Controller Interface driver

[ 2.196187] i8042: PNP: No PS/2 controller found. Probing ports directly.

[ 2.230274] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?

[ 2.230276] i8042: If AUX port is really absent please use the 'i8042.noaux' option

[ 2.376022] Refined TSC clocksource calibration: 3415.554 MHz.

[ 2.376025] Switching to clocksource tsc

[ 2.480101] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 2.480170] mousedev: PS/2 mouse device common for all mice

[ 2.480246] rtc_cmos 00:05: RTC can wake from S4

[ 2.480303] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0

[ 2.480334] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs

[ 2.480387] device-mapper: uevent: version 1.0.3

[ 2.480434] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com

[ 2.480485] device-mapper: multipath: version 1.2.0 loaded

[ 2.480487] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 2.480532] EISA: Probing bus 0 at eisa.0

[ 2.480533] EISA: Cannot allocate resource for mainboard

[ 2.480535] Cannot allocate resource for EISA slot 1

[ 2.480536] Cannot allocate resource for EISA slot 2

[ 2.480537] Cannot allocate resource for EISA slot 3

[ 2.480538] Cannot allocate resource for EISA slot 4

[ 2.480539] Cannot allocate resource for EISA slot 5

[ 2.480540] Cannot allocate resource for EISA slot 6

[ 2.480541] Cannot allocate resource for EISA slot 7

[ 2.480542] Cannot allocate resource for EISA slot 8

[ 2.480544] EISA: Detected 0 cards.

[ 2.480583] cpuidle: using governor ladder

[ 2.480584] cpuidle: using governor menu

[ 2.480746] TCP cubic registered

[ 2.480822] NET: Registered protocol family 10

[ 2.481166] NET: Registered protocol family 17

[ 2.481175] Registering the dns_resolver key type

[ 2.481191] powernow-k8: Found 1 AMD Phenom(tm) II X2 550 Processor (2 cpu cores) (version 2.20.00)

[ 2.481197] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.

[ 2.481198] [Firmware Bug]: powernow-k8: Try again with latest BIOS.

[ 2.481208] Using IPI No-Shortcut mode

[ 2.481257] PM: Hibernation image not present or could not be loaded.

[ 2.481263] registered taskstats version 1

[ 2.481463] Magic number: 11:445:240

[ 2.481515] rtc_cmos 00:05: setting system clock to 2011-05-05 18:13:04 UTC (1304619184)

[ 2.481517] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 2.481518] EDD information not available.

[ 2.481594] Freeing unused kernel memory: 720k freed

[ 2.481768] Write protecting the kernel text: 5352k

[ 2.481802] Write protecting the kernel read-only data: 2188k

[ 2.481804] NX-protecting the kernel data: 4888k

[ 2.496177] <30>udev[64]: starting version 167

[ 2.533785] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 2.533809] pata_jmicron 0000:02:00.1: setting latency timer to 64

[ 2.563817] scsi0 : pata_jmicron

[ 2.564734] scsi2 : pata_atiixp

[ 2.564784] scsi1 : pata_jmicron

[ 2.564811] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17

[ 2.564814] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17

[ 2.565621] scsi3 : pata_atiixp

[ 2.565993] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14

[ 2.565995] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15

[ 2.568616] Floppy drive(s): fd0 is 1.44M

[ 2.570722] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 2.570736] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 2.570763] r8169 0000:03:00.0: setting latency timer to 64

[ 2.570800] r8169 0000:03:00.0: irq 43 for MSI/MSI-X

[ 2.571111] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf84ca000, 00:24:1d:1d:4f:73, XID 081000c0 IRQ 43

[ 2.584393] [drm] Initialized drm 1.1.0 20060810

[ 2.586161] ahci 0000:00:11.0: version 3.0

[ 2.586179] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 2.586269] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode

[ 2.586271] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc

[ 2.587752] scsi4 : ahci

[ 2.587822] scsi5 : ahci

[ 2.587887] scsi6 : ahci

[ 2.587917] FDC 0 is a post-1991 82077

[ 2.587975] scsi7 : ahci

[ 2.588066] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22

[ 2.588069] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22

[ 2.588072] ata7: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22

[ 2.588075] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22

[ 2.588108] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 2.604051] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode

[ 2.604054] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part

[ 2.604059] ahci 0000:02:00.0: setting latency timer to 64

[ 2.604292] scsi8 : ahci

[ 2.604338] scsi9 : ahci

[ 2.604372] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16

[ 2.604375] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16

[ 2.732787] ata3.00: ATAPI: _NEC DVD_RW ND-2500A, 1.06, max UDMA/33

[ 2.748453] ata3.00: configured for UDMA/33

[ 2.750387] ata4.00: HPA detected: current 62531183, native 62533296

[ 2.750391] ata4.00: ATA-7: OCZ-VERTEX v1.10, 1370, max UDMA/133

[ 2.750393] ata4.00: 62531183 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 2.750493] ata4.01: ATA-8: OCZ VERTEX-TURBO, 1.5, max UDMA/133

[ 2.750494] ata4.01: 125045424 sectors, multi 1: LBA48 NCQ (depth 0/32)

[ 2.756418] ata4.00: configured for UDMA/100

[ 2.772428] ata4.01: configured for UDMA/100

[ 2.860028] usb 4-1: new full speed USB device using ohci_hcd and address 2

[ 2.888144] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-2500A 1.06 PQ: 0 ANSI: 5

[ 2.889448] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

[ 2.889451] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 2.889534] sr 2:0:0:0: Attached scsi CD-ROM sr0

[ 2.889581] sr 2:0:0:0: Attached scsi generic sg0 type 5

[ 2.889719] scsi 3:0:0:0: Direct-Access ATA OCZ-VERTEX v1.10 1370 PQ: 0 ANSI: 5

[ 2.889797] sd 3:0:0:0: [sda] 62531183 512-byte logical blocks: (32.0 GB/29.8 GiB)

[ 2.889818] sd 3:0:0:0: Attached scsi generic sg1 type 0

[ 2.889834] sd 3:0:0:0: [sda] Write Protect is off

[ 2.889836] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 2.889849] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.889871] scsi 3:0:1:0: Direct-Access ATA OCZ VERTEX-TURBO 1.5 PQ: 0 ANSI: 5

[ 2.889964] sd 3:0:1:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)

[ 2.889977] sd 3:0:1:0: Attached scsi generic sg2 type 0

[ 2.890014] sd 3:0:1:0: [sdb] Write Protect is off

[ 2.890016] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[ 2.890027] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.908034] ata8: SATA link down (SStatus 0 SControl 300)

[ 2.908088] ata5: SATA link down (SStatus 0 SControl 300)

[ 2.924040] ata9: SATA link down (SStatus 0 SControl 300)

[ 2.924068] ata10: SATA link down (SStatus 0 SControl 300)

[ 2.983326] sdb: sdb1 sdb2 < sdb5 >

[ 2.983582] sda: sda1 sda2 < sda5 > sda3

[ 2.983799] sd 3:0:0:0: [sda] Attached SCSI disk

[ 2.983830] sd 3:0:1:0: [sdb] Attached SCSI disk

[ 3.064212] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input2

[ 3.064273] generic-usb 0003:046D:C041.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:12.1-1/input0

[ 3.075170] generic-usb 0003:046D:C041.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:12.1-1/input1

[ 3.075179] usbcore: registered new interface driver usbhid

[ 3.075180] usbhid: USB HID core driver

[ 3.136018] ata6: softreset failed (device not ready)

[ 3.136021] ata6: applying SB600 PMP SRST workaround and retrying

[ 3.308010] usb 6-2: new low speed USB device using ohci_hcd and address 2

[ 3.308025] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 3.308783] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133

[ 3.308785] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 3.309446] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x100)

[ 3.309448] ata6.00: revalidation failed (errno=-5)

[ 3.516088] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3

[ 3.516141] generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.1-2/input0

[ 3.538212] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input4

[ 3.538258] generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.1-2/input1

[ 8.480019] ata7: softreset failed (device not ready)

[ 8.480022] ata7: applying SB600 PMP SRST workaround and retrying

[ 8.652023] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 8.653924] ata7.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.09, max UDMA/66

[ 8.656139] ata7.00: configured for UDMA/66

[ 8.800018] ata6: softreset failed (device not ready)

[ 8.800021] ata6: applying SB600 PMP SRST workaround and retrying

[ 8.972026] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 8.973643] ata6.00: configured for UDMA/133

[ 8.973719] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 8.973811] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 8.973892] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 8.973946] sd 5:0:0:0: [sdc] Write Protect is off

[ 8.973948] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 8.973971] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 8.988728] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 8.988730] ata6.00: irq_stat 0x08000000, interface fatal error

[ 8.988733] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 8.988735] ata6.00: failed command: READ FPDMA QUEUED

[ 8.988739] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 8.988740] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 8.988741] ata6.00: status: { DRDY }

[ 8.988744] ata6: hard resetting link

[ 9.005132] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.09 PQ: 0 ANSI: 5

[ 9.036383] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

[ 9.036457] sr 6:0:0:0: Attached scsi CD-ROM sr1

[ 9.036495] sr 6:0:0:0: Attached scsi generic sg4 type 5

[ 9.480019] ata6: softreset failed (device not ready)

[ 9.480022] ata6: applying SB600 PMP SRST workaround and retrying

[ 9.652030] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 9.653689] ata6.00: configured for UDMA/133

[ 9.653695] ata6: EH complete

[ 9.666516] ata6: limiting SATA link speed to 1.5 Gbps

[ 9.666518] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen

[ 9.666520] ata6.00: irq_stat 0x08000000, interface fatal error

[ 9.666522] ata6: SError: { UnrecovData HostInt 10B8B BadCRC }

[ 9.666524] ata6.00: failed command: READ FPDMA QUEUED

[ 9.666528] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 9.666528] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 9.666530] ata6.00: status: { DRDY }

[ 9.666532] ata6: hard resetting link

[ 19.664027] ata6: softreset failed (1st FIS failed)

[ 19.664030] ata6: hard resetting link

[ 29.664027] ata6: softreset failed (1st FIS failed)

[ 29.664030] ata6: hard resetting link

[ 64.664026] ata6: softreset failed (1st FIS failed)

[ 64.664031] ata6: hard resetting link

[ 69.852016] ata6: softreset failed (device not ready)

[ 69.852018] ata6: reset failed, giving up

[ 69.852020] ata6.00: disabled

[ 69.852028] ata6: EH complete

[ 69.852036] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852037] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852040] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852045] end_request: I/O error, dev sdc, sector 0

[ 69.852047] Buffer I/O error on device sdc, logical block 0

[ 69.852079] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852082] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852084] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852090] end_request: I/O error, dev sdc, sector 0

[ 69.852092] Buffer I/O error on device sdc, logical block 0

[ 69.852114] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852115] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852117] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852121] end_request: I/O error, dev sdc, sector 0

[ 69.852123] Buffer I/O error on device sdc, logical block 0

[ 69.852141] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852142] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852144] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852148] end_request: I/O error, dev sdc, sector 0

[ 69.852150] Buffer I/O error on device sdc, logical block 0

[ 69.852167] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852168] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852170] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852174] end_request: I/O error, dev sdc, sector 0

[ 69.852175] Buffer I/O error on device sdc, logical block 0

[ 69.852180] ldm_validate_partition_table(): Disk read failed.

[ 69.852194] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852195] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852197] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852201] end_request: I/O error, dev sdc, sector 0

[ 69.852202] Buffer I/O error on device sdc, logical block 0

[ 69.852219] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852220] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852222] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852226] end_request: I/O error, dev sdc, sector 0

[ 69.852227] Buffer I/O error on device sdc, logical block 0

[ 69.852245] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852246] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852248] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852252] end_request: I/O error, dev sdc, sector 0

[ 69.852253] Buffer I/O error on device sdc, logical block 0

[ 69.852270] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852271] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852273] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852277] end_request: I/O error, dev sdc, sector 0

[ 69.852278] Buffer I/O error on device sdc, logical block 0

[ 69.852283] Dev sdc: unable to read RDB block 0

[ 69.852296] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852297] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852299] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852303] end_request: I/O error, dev sdc, sector 0

[ 69.852305] Buffer I/O error on device sdc, logical block 0

[ 69.852321] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852323] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852325] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852329] end_request: I/O error, dev sdc, sector 0

[ 69.852348] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852349] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852351] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 69.852355] end_request: I/O error, dev sdc, sector 24

[ 69.852367] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852368] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852370] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 69.852375] end_request: I/O error, dev sdc, sector 24

[ 69.852387] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852389] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852390] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852394] end_request: I/O error, dev sdc, sector 0

[ 69.852411] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852413] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852415] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852419] end_request: I/O error, dev sdc, sector 0

[ 69.852424] sdc: unable to read partition table

[ 69.852502] sd 5:0:0:0: [sdc] READ CAPACITY(16) failed

[ 69.852503] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852505] sd 5:0:0:0: [sdc] Sense not available.

[ 69.852532] sd 5:0:0:0: [sdc] READ CAPACITY failed

[ 69.852534] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852536] sd 5:0:0:0: [sdc] Sense not available.

[ 69.852571] sd 5:0:0:0: [sdc] Write Protect is on

[ 69.852573] sd 5:0:0:0: [sdc] Mode Sense: cc cc cc cc

[ 69.852582] sd 5:0:0:0: [sdc] Asking for cache data failed

[ 69.852583] sd 5:0:0:0: [sdc] Assuming drive cache: write through

[ 69.852585] sd 5:0:0:0: [sdc] Attached SCSI disk

[ 69.868668] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 69.892613] [drm] radeon defaulting to kernel modesetting.

[ 69.892615] [drm] radeon kernel modesetting enabled.

[ 69.892667] radeon 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[ 69.892671] radeon 0000:01:00.0: setting latency timer to 64

[ 69.894698] [drm] initializing kernel modesetting (RV730 0x1002:0x9490).

[ 69.894798] [drm] register mmio base: 0xFDEE0000

[ 69.894799] [drm] register mmio size: 65536

[ 69.895917] ATOM BIOS: RV730

[ 69.895935] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)

[ 69.895937] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF

[ 69.897365] [drm] Detected VRAM RAM=512M, BAR=256M

[ 69.897368] [drm] RAM width 128bits DDR

[ 69.898740] [TTM] Zone kernel: Available graphics memory: 419858 kiB.

[ 69.898813] [TTM] Zone highmem: Available graphics memory: 2059734 kiB.

[ 69.898815] [TTM] Initializing pool allocator.

[ 69.898827] [drm] radeon: 512M of VRAM memory ready

[ 69.898828] [drm] radeon: 512M of GTT memory ready.

[ 69.898838] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).

[ 69.898839] [drm] Driver supports precise vblank timestamp query.

[ 69.898871] radeon 0000:01:00.0: irq 44 for MSI/MSI-X

[ 69.898875] radeon 0000:01:00.0: radeon: using MSI.

[ 69.898901] [drm] radeon: irq initialized.

[ 69.898904] [drm] GART: num cpu pages 131072, num gpu pages 131072

[ 69.899856] [drm] Loading RV730 Microcode

[ 69.906930] radeon 0000:01:00.0: WB enabled

[ 69.924161] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2

[ 69.952841] [drm] ring test succeeded in 1 usecs

[ 69.952924] [drm] radeon: ib pool ready.

[ 69.952975] [drm] ib test succeeded in 0 usecs

[ 69.952976] [drm] Enabling audio support

[ 69.952981] failed to evaluate ATIF got AE_BAD_PARAMETER

[ 69.953316] [drm] Radeon Display Connectors

[ 69.953318] [drm] Connector 0:

[ 69.953319] [drm] VGA

[ 69.953321] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c

[ 69.953322] [drm] Encoders:

[ 69.953323] [drm] CRT2: INTERNAL_KLDSCP_DAC2

[ 69.953324] [drm] Connector 1:

[ 69.953325] [drm] HDMI-A

[ 69.953325] [drm] HPD2

[ 69.953327] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c

[ 69.953328] [drm] Encoders:

[ 69.953329] [drm] DFP2: INTERNAL_UNIPHY1

[ 69.953330] [drm] Connector 2:

[ 69.953331] [drm] DVI-I

[ 69.953331] [drm] HPD1

[ 69.953333] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c

[ 69.953334] [drm] Encoders:

[ 69.953335] [drm] CRT1: INTERNAL_KLDSCP_DAC1

[ 69.953336] [drm] DFP1: INTERNAL_UNIPHY

[ 70.010240] [drm] Internal thermal controller with fan control

[ 70.010269] [drm] radeon: power management initialized

[ 70.095735] [drm] fb mappable at 0xD0142000

[ 70.095737] [drm] vram apper at 0xD0000000

[ 70.095738] [drm] size 9216000

[ 70.095739] [drm] fb depth is 24

[ 70.095740] [drm] pitch is 7680

[ 70.095839] Console: switching to colour frame buffer device 240x75

[ 70.095873] fb0: radeondrmfb frame buffer device

[ 70.095874] drm: registered panic notifier

[ 70.095878] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0

[ 70.424079] firewire_core: created device fw0: GUID 001add440000241d, S400

[ 70.853726] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[ 71.107211] Adding 1951740k swap on /dev/sdb5. Priority:-1 extents:1 across:1951740k SS

[ 71.125502] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro

[ 71.290600] <30>udev[492]: starting version 167

[ 71.366702] lp: driver loaded but no devices found

[ 71.430385] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]

[ 71.430387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 71.444661] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01

[ 71.444872] SP5100 TCO timer: mmio address 0xfec000f0 already in use

[ 71.756115] Linux video capture interface: v2.00

[ 71.765843] uvcvideo: Found UVC 1.00 device (046d:09a4)

[ 71.784056] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input5

[ 71.784105] usbcore: registered new interface driver uvcvideo

[ 71.784106] USB Video Class driver (v1.0.0)

[ 71.796837] r8169 0000:03:00.0: eth0: link down

[ 71.796843] r8169 0000:03:00.0: eth0: link down

[ 71.797532] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 71.859038] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 71.886586] set volume quirk for QuickCam E3500

[ 71.887248] usbcore: registered new interface driver snd-usb-audio

[ 71.976625] hda_codec: ALC889A: BIOS auto-probing.

[ 71.985760] vboxdrv: Found 2 processor cores.

[ 71.988425] vboxdrv: fAsync=0 offMin=0x45f offMax=0xf8c

[ 71.988487] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[ 71.988488] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).

[ 72.027163] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6

[ 72.027347] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16

[ 72.027411] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X

[ 72.027516] HDA Intel 0000:01:00.1: setting latency timer to 64

[ 72.299258] ppdev: user-space parallel port driver

[ 72.356502] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0

[ 72.404259] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen

[ 72.404263] ata6: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch }

[ 72.404268] ata6: hard resetting link

[ 73.300025] ata6: softreset failed (device not ready)

[ 73.300029] ata6: applying SB600 PMP SRST workaround and retrying

[ 73.472019] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 73.472838] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133

[ 73.472841] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 73.473711] ata6.00: configured for UDMA/133

[ 73.488024] ata6: EH complete

[ 73.488031] ata6.00: detaching (SCSI 5:0:0:0)

[ 73.500106] sd 5:0:0:0: [sdc] Stopping disk

[ 73.515569] r8169 0000:03:00.0: eth0: link up

[ 73.515734] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 74.375659] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 74.375771] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 74.375779] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 74.375800] sd 5:0:0:0: [sdc] Write Protect is off

[ 74.375802] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 74.375815] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 75.692013] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 75.692016] ata6.00: irq_stat 0x08000000, interface fatal error

[ 75.692019] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 75.692022] ata6.00: failed command: READ FPDMA QUEUED

[ 75.692026] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 75.692026] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 75.692028] ata6.00: status: { DRDY }

[ 75.692031] ata6: hard resetting link

[ 76.184014] ata6: softreset failed (device not ready)

[ 76.184018] ata6: applying SB600 PMP SRST workaround and retrying

[ 76.356025] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 76.357725] ata6.00: configured for UDMA/133

[ 76.372024] ata6: EH complete

[ 76.392053] ata6: limiting SATA link speed to 1.5 Gbps

[ 76.392057] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 76.392059] ata6.00: irq_stat 0x08000000, interface fatal error

[ 76.392061] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 76.392063] ata6.00: failed command: READ FPDMA QUEUED

[ 76.392067] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 76.392068] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 76.392069] ata6.00: status: { DRDY }

[ 76.392073] ata6: hard resetting link

[ 83.544081] eth0: no IPv6 routers present

[ 86.392028] ata6: softreset failed (1st FIS failed)

[ 86.392033] ata6: hard resetting link

[ 96.392029] ata6: softreset failed (1st FIS failed)

[ 96.392033] ata6: hard resetting link

[ 131.392027] ata6: softreset failed (1st FIS failed)

[ 131.392033] ata6: hard resetting link

[ 136.580088] ata6: softreset failed (device not ready)

[ 136.580091] ata6: reset failed, giving up

[ 136.580093] ata6.00: disabled

[ 136.580103] ata6: EH complete

[ 136.580115] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580117] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580119] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580125] end_request: I/O error, dev sdc, sector 0

[ 136.580127] quiet_error: 44 callbacks suppressed

[ 136.580128] Buffer I/O error on device sdc, logical block 0

[ 136.580166] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580169] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580172] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580178] end_request: I/O error, dev sdc, sector 0

[ 136.580181] Buffer I/O error on device sdc, logical block 0

[ 136.580206] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580208] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580210] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580214] end_request: I/O error, dev sdc, sector 0

[ 136.580215] Buffer I/O error on device sdc, logical block 0

[ 136.580234] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580235] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580237] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580241] end_request: I/O error, dev sdc, sector 0

[ 136.580243] Buffer I/O error on device sdc, logical block 0

[ 136.580259] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580261] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580263] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580267] end_request: I/O error, dev sdc, sector 0

[ 136.580268] Buffer I/O error on device sdc, logical block 0

[ 136.580273] ldm_validate_partition_table(): Disk read failed.

[ 136.580287] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580288] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580290] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580294] end_request: I/O error, dev sdc, sector 0

[ 136.580296] Buffer I/O error on device sdc, logical block 0

[ 136.580312] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580313] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580315] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580319] end_request: I/O error, dev sdc, sector 0

[ 136.580321] Buffer I/O error on device sdc, logical block 0

[ 136.580337] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580338] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580340] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580344] end_request: I/O error, dev sdc, sector 0

[ 136.580346] Buffer I/O error on device sdc, logical block 0

[ 136.580362] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580363] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580365] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580369] end_request: I/O error, dev sdc, sector 0

[ 136.580371] Buffer I/O error on device sdc, logical block 0

[ 136.580376] Dev sdc: unable to read RDB block 0

[ 136.580389] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580390] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580392] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580396] end_request: I/O error, dev sdc, sector 0

[ 136.580397] Buffer I/O error on device sdc, logical block 0

[ 136.580414] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580415] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580417] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580421] end_request: I/O error, dev sdc, sector 0

[ 136.580440] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580442] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580443] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 136.580447] end_request: I/O error, dev sdc, sector 24

[ 136.580459] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580461] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580463] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 136.580467] end_request: I/O error, dev sdc, sector 24

[ 136.580479] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580480] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580482] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580486] end_request: I/O error, dev sdc, sector 0

[ 136.580503] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580505] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580507] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580511] end_request: I/O error, dev sdc, sector 0

[ 136.580516] sdc: unable to read partition table

[ 136.580589] sd 5:0:0:0: [sdc] READ CAPACITY(16) failed

[ 136.580591] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580593] sd 5:0:0:0: [sdc] Sense not available.

[ 136.580607] sd 5:0:0:0: [sdc] READ CAPACITY failed

[ 136.580608] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580610] sd 5:0:0:0: [sdc] Sense not available.

[ 136.580630] sd 5:0:0:0: [sdc] Truncating mode parameter data from 60261 to 512 bytes

[ 136.580636] sd 5:0:0:0: [sdc] Got wrong page

[ 136.580638] sd 5:0:0:0: [sdc] Assuming drive cache: write through

[ 136.580640] sd 5:0:0:0: [sdc] Attached SCSI disk

[ 523.025910] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0

[ 523.031419] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen

[ 523.031423] ata6: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch }

[ 523.031428] ata6: hard resetting link

[ 523.928031] ata6: softreset failed (device not ready)

[ 523.928035] ata6: applying SB600 PMP SRST workaround and retrying

[ 524.100035] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 524.100654] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x100)

[ 529.100115] ata6: hard resetting link

[ 529.100478] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.100481] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.100484] Info fld=0x10, ILI

[ 529.100486] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.100489] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.100494] end_request: I/O error, dev sr1, sector 64

[ 529.100497] quiet_error: 5 callbacks suppressed

[ 529.100499] Buffer I/O error on device sr1, logical block 16

[ 529.100501] Buffer I/O error on device sr1, logical block 17

[ 529.102279] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.102283] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.102285] Info fld=0x10, ILI

[ 529.102287] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.102289] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 01 00

[ 529.102294] end_request: I/O error, dev sr1, sector 64

[ 529.102296] Buffer I/O error on device sr1, logical block 16

[ 529.104333] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.104336] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.104339] Info fld=0x11, ILI

[ 529.104340] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.104342] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 11 00 00 01 00

[ 529.104347] end_request: I/O error, dev sr1, sector 68

[ 529.104349] Buffer I/O error on device sr1, logical block 17

[ 529.554092] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.554097] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.554100] Info fld=0x10, ILI

[ 529.554102] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.554105] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.554110] end_request: I/O error, dev sr1, sector 64

[ 529.554113] Buffer I/O error on device sr1, logical block 16

[ 529.554115] Buffer I/O error on device sr1, logical block 17

[ 529.555890] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.555894] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.555897] Info fld=0x10, ILI

[ 529.555898] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.555902] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.555907] end_request: I/O error, dev sr1, sector 64

[ 529.555909] Buffer I/O error on device sr1, logical block 16

[ 529.555911] Buffer I/O error on device sr1, logical block 17

[ 529.592023] ata6: softreset failed (device not ready)

[ 529.592027] ata6: applying SB600 PMP SRST workaround and retrying

[ 529.592588] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.592592] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.592596] Info fld=0x10, ILI

[ 529.592597] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.592601] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.592606] end_request: I/O error, dev sr1, sector 64

[ 529.592609] Buffer I/O error on device sr1, logical block 16

[ 529.592611] Buffer I/O error on device sr1, logical block 17

[ 529.594368] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.594372] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.594376] Info fld=0x10, ILI

[ 529.594377] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.594380] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 01 00

[ 529.594385] end_request: I/O error, dev sr1, sector 64

[ 529.596210] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.596215] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.596218] Info fld=0x11, ILI

[ 529.596219] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.596223] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 11 00 00 01 00

[ 529.596228] end_request: I/O error, dev sr1, sector 68

[ 529.631344] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.631348] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.631352] Info fld=0x10, ILI

[ 529.631353] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.631357] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.631362] end_request: I/O error, dev sr1, sector 64

[ 529.633186] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.633189] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.633192] Info fld=0x10, ILI

[ 529.633193] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.633196] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.633200] end_request: I/O error, dev sr1, sector 64

[ 529.685345] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.685350] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.685353] Info fld=0x10, ILI

[ 529.685354] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.685358] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.685363] end_request: I/O error, dev sr1, sector 64

[ 529.687153] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.687156] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.687159] Info fld=0x10, ILI

[ 529.687160] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.687164] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.687168] end_request: I/O error, dev sr1, sector 64

[ 529.764028] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 529.764797] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133

[ 529.764799] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 529.765671] ata6.00: configured for UDMA/133

[ 529.780012] ata6: EH complete

[ 529.780019] ata6.00: detaching (SCSI 5:0:0:0)

[ 529.796099] sd 5:0:0:0: [sdc] Stopping disk

[ 529.882838] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.

[ 530.296989] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.296993] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.296997] Info fld=0x10, ILI

[ 530.296998] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.297002] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.297007] end_request: I/O error, dev sr1, sector 64

[ 530.298691] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.298694] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.298696] Info fld=0x10, ILI

[ 530.298698] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.298700] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.298705] end_request: I/O error, dev sr1, sector 64

[ 530.377531] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.377535] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.377539] Info fld=0x10, ILI

[ 530.377540] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.377544] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.377549] end_request: I/O error, dev sr1, sector 64

[ 530.379448] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.379451] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.379454] Info fld=0x10, ILI

[ 530.379455] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.379458] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.379462] end_request: I/O error, dev sr1, sector 64

[ 530.417707] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.417711] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.417714] Info fld=0x10, ILI

[ 530.417716] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.417719] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.417724] end_request: I/O error, dev sr1, sector 64

[ 530.419977] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.419980] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.419983] Info fld=0x10, ILI

[ 530.419984] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.419987] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.420016] end_request: I/O error, dev sr1, sector 64

[ 530.455413] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.455417] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.455421] Info fld=0x10, ILI

[ 530.455422] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.455426] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.455431] end_request: I/O error, dev sr1, sector 64

[ 530.457246] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.457249] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.457252] Info fld=0x10, ILI

[ 530.457253] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.457256] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.457261] end_request: I/O error, dev sr1, sector 64

[ 530.493692] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.493696] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.493699] Info fld=0x10, ILI

[ 530.493701] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.493705] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.493710] end_request: I/O error, dev sr1, sector 64

[ 530.495474] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.495477] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.495480] Info fld=0x10, ILI

[ 530.495481] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.495484] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.495488] end_request: I/O error, dev sr1, sector 64

[ 530.671971] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 530.672139] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 530.672503] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 530.672579] sd 5:0:0:0: [sdc] Write Protect is off

[ 530.672581] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 530.672593] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 530.740068] 2:3:1: cannot set freq 16000 to ep 0x86

[ 531.740091] 2:3:1: cannot set freq 16000 to ep 0x86

[ 531.990440] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen

[ 531.990443] ata6.00: irq_stat 0x08000000, interface fatal error

[ 531.990446] ata6: SError: { UnrecovData HostInt 10B8B BadCRC }

[ 531.990449] ata6.00: failed command: READ FPDMA QUEUED

[ 531.990452] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 531.990453] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 531.990455] ata6.00: status: { DRDY }

[ 531.990459] ata6: hard resetting link

[ 532.484014] ata6: softreset failed (device not ready)

[ 532.484018] ata6: applying SB600 PMP SRST workaround and retrying

[ 532.656027] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 532.657685] ata6.00: configured for UDMA/133

[ 532.672029] ata6: EH complete

[ 532.690562] ata6: limiting SATA link speed to 1.5 Gbps

[ 532.690565] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen

[ 532.690568] ata6.00: irq_stat 0x08000000, interface fatal error

[ 532.690570] ata6: SError: { UnrecovData HostInt 10B8B BadCRC }

[ 532.690573] ata6.00: failed command: READ FPDMA QUEUED

[ 532.690577] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 532.690577] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 532.690604] ata6.00: status: { DRDY }

[ 532.690607] ata6: hard resetting link

[ 532.740118] 2:3:1: cannot set freq 16000 to ep 0x86

[ 533.740143] 2:3:1: cannot set freq 16000 to ep 0x86

[ 534.740056] 2:3:1: cannot set freq 16000 to ep 0x86

[ 535.740069] 2:3:1: cannot set freq 16000 to ep 0x86

[ 536.740094] 2:3:1: cannot set freq 16000 to ep 0x86

[ 537.740121] 2:3:1: cannot set freq 16000 to ep 0x86

[ 538.740147] 2:3:1: cannot set freq 16000 to ep 0x86

[ 539.740048] 2:3:1: cannot set freq 16000 to ep 0x86

[ 540.740074] 2:3:1: cannot set freq 16000 to ep 0x86

[ 541.740100] 2:3:1: cannot set freq 16000 to ep 0x86

[ 542.688036] ata6: softreset failed (1st FIS failed)

[ 542.688041] ata6: hard resetting link

[ 542.740125] 2:3:1: cannot set freq 16000 to ep 0x86

[ 543.740153] 2:3:1: cannot set freq 16000 to ep 0x86

[ 544.740179] 2:3:1: cannot set freq 16000 to ep 0x86

[ 545.740080] 2:3:1: cannot set freq 16000 to ep 0x86

[ 546.740106] 2:3:1: cannot set freq 16000 to ep 0x86

[ 547.740132] 2:3:1: cannot set freq 16000 to ep 0x86

[ 548.740033] 2:3:1: cannot set freq 16000 to ep 0x86

[ 549.740059] 2:3:1: cannot set freq 16000 to ep 0x86

[ 550.996190] 2:3:1: cannot set freq 16000 to ep 0x86

[ 551.996088] 2:3:1: cannot set freq 16000 to ep 0x86

[ 552.692031] ata6: softreset failed (1st FIS failed)

[ 552.692036] ata6: hard resetting link

[ 552.996116] 2:3:1: cannot set freq 16000 to ep 0x86

[ 553.996153] 2:3:1: cannot set freq 16000 to ep 0x86

[ 554.996167] 2:3:1: cannot set freq 16000 to ep 0x86

[ 555.996193] 2:3:1: cannot set freq 16000 to ep 0x86

[ 556.996094] 2:3:1: cannot set freq 16000 to ep 0x86

[ 557.996123] 2:3:1: cannot set freq 16000 to ep 0x86



Problemet kunne bestemt ligne dette:

http://kubuntuforums.net/forums/index.php?topic=3116527.0



Dog får jeg ikke løsningen til at virke ...

Efter boot

dmesg > tmp.tmp





[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.38-8-generic-pae (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 (Ubuntu 2.6.38-8.42-generic-pae 2.6.38.2)

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)

[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)

[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)

[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)

[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] DMI 2.4 present.

[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F4 05/21/2009

[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-C7FFF write-protect

[ 0.000000] C8000-FFFFF uncachable

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back

[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back

[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back

[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable

[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back

[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] TOM2: 0000000130000000 aka 4864M

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)

[ 0.000000] found SMP MP-table at [c00f5570] f5570

[ 0.000000] initial memory mapped : 0 - 01e00000

[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000

[ 0.000000] 0000000000 - 0000200000 page 4k

[ 0.000000] 0000200000 - 0037a00000 page 2M

[ 0.000000] 0037a00000 - 0037bfe000 page 4k

[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000

[ 0.000000] RAMDISK: 35d46000 - 36e9b000

[ 0.000000] ACPI: RSDP 000f6f80 00014 (v00 GBT )

[ 0.000000] ACPI: RSDT cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: FACP cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: DSDT cfee30c0 07187 (v01 GBT GBTUACPI 00001000 MSFT 03000000)

[ 0.000000] ACPI: FACS cfee0000 00040

[ 0.000000] ACPI: HPET cfeea340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)

[ 0.000000] ACPI: MCFG cfeea380 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: TAMG cfeea3c0 0040A (v01 GBT GBT B0 5455312E BG?? 53450101)

[ 0.000000] ACPI: APIC cfeea280 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] 3972MB HIGHMEM available.

[ 0.000000] 891MB LOWMEM available.

[ 0.000000] mapped low ram: 0 - 37bfe000

[ 0.000000] low ram: 0 - 37bfe000

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] Normal 0x00001000 -> 0x00037bfe

[ 0.000000] HighMem 0x00037bfe -> 0x00130000

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[3] active PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009f

[ 0.000000] 0: 0x00000100 -> 0x000cfee0

[ 0.000000] 0: 0x00100000 -> 0x00130000

[ 0.000000] On node 0 totalpages: 1048175

[ 0.000000] free_area_init_node: node 0, pgdat c17babc0, node_mem_map f3746200

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 3951 pages, LIFO batch:0

[ 0.000000] Normal zone: 1752 pages used for memmap

[ 0.000000] Normal zone: 222502 pages, LIFO batch:31

[ 0.000000] HighMem zone: 7945 pages used for memmap

[ 0.000000] HighMem zone: 811993 pages, LIFO batch:31

[ 0.000000] Using APIC driver default

[ 0.000000] ACPI: PM-Timer IO Port: 0x4008

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000

[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000

[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u524288

[ 0.000000] pcpu-alloc: s32320 r0 d20928 u524288 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1 2 3

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038446

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic-pae root=UUID=94fa65a0-9c8c-407a-aa19-19ed790b5e24 ro quiet splash vt.handoff=7

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Initializing CPU#0

[ 0.000000] allocated 24903360 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] Initializing HighMem for node 0 (00037bfe:00130000)

[ 0.000000] Memory: 4101000k/4980736k available (5349k kernel code, 91700k reserved, 2599k data, 720k init, 3279752k highmem)

[ 0.000000] virtual kernel memory layout:

[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)

[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)

[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)

[ 0.000000] .init : 0xc17c4000 - 0xc1878000 ( 720 kB)

[ 0.000000] .data : 0xc1539545 - 0xc17c3540 (2599 kB)

[ 0.000000] .text : 0xc1000000 - 0xc1539545 (5349 kB)

[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.

[ 0.000000] RCU-based detection of stalled CPUs is disabled.

[ 0.000000] NR_IRQS:2304 nr_irqs:712 16

[ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000

[ 0.000000] spurious 8259A interrupt: IRQ7.

[ 0.000000] vt handoff: transparent VT on vt#7

[ 0.000000] Console: colour dummy device 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] hpet clockevent registered

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 3415.056 MHz processor.

[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.11 BogoMIPS (lpj=13660224)

[ 0.004006] pid_max: default: 32768 minimum: 301

[ 0.004023] Security Framework initialized

[ 0.004036] AppArmor: AppArmor initialized

[ 0.004037] Yama: becoming mindful.

[ 0.004082] Mount-cache hash table entries: 512

[ 0.004172] Initializing cgroup subsys ns

[ 0.004174] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.

[ 0.004177] Initializing cgroup subsys cpuacct

[ 0.004181] Initializing cgroup subsys memory

[ 0.004187] Initializing cgroup subsys devices

[ 0.004190] Initializing cgroup subsys freezer

[ 0.004191] Initializing cgroup subsys net_cls

[ 0.004193] Initializing cgroup subsys blkio

[ 0.004216] CPU: Physical Processor ID: 0

[ 0.004217] CPU: Processor Core ID: 0

[ 0.004220] mce: CPU supports 6 MCE banks

[ 0.004227] using C1E aware idle routine

[ 0.008569] ACPI: Core revision 20110112

[ 0.012025] ftrace: allocating 24250 entries in 48 pages

[ 0.016049] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.016517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.059460] CPU0: AMD Phenom(tm) II X2 550 Processor stepping 02

[ 0.060003] Performance Events: AMD PMU driver.

[ 0.060003] ... version: 0

[ 0.060003] ... bit width: 48

[ 0.060003] ... generic registers: 4

[ 0.060003] ... value mask: 0000ffffffffffff

[ 0.060003] ... max period: 00007fffffffffff

[ 0.060003] ... fixed-purpose events: 0

[ 0.060003] ... event mask: 000000000000000f

[ 0.060003] CPU 1 irqstacks, hard=f74b2000 soft=f74b4000

[ 0.060003] Booting Node 0, Processors #1

[ 0.008000] Initializing CPU#1

[ 0.148015] Brought up 2 CPUs

[ 0.148017] Total of 2 processors activated (13661.27 BogoMIPS).

[ 0.148692] devtmpfs: initialized

[ 0.148746] print_constraints: dummy:

[ 0.148767] Time: 18:13:02 Date: 05/05/11

[ 0.148791] NET: Registered protocol family 16

[ 0.148868] EISA bus registered

[ 0.148872] node 0 link 0: io port [b000, ffff]

[ 0.148827] Trying to unpack rootfs image as initramfs...

[ 0.148876] TOM: 00000000d0000000 aka 3328M

[ 0.148877] Fam 10h mmconf [e0000000, e00fffff]

[ 0.148879] node 0 link 0: mmio [a0000, bffff]

[ 0.148882] node 0 link 0: mmio [d0000000, dfffffff]

[ 0.148884] node 0 link 0: mmio [f0000000, fe02ffff]

[ 0.148885] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]

[ 0.148888] TOM2: 0000000130000000 aka 4864M

[ 0.148890] bus: [00, 04] on node 0 link 0

[ 0.148892] bus: 00 index 0 [io 0x0000-0xffff]

[ 0.148893] bus: 00 index 1 [mem 0x000a0000-0x000bffff]

[ 0.148895] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]

[ 0.148896] bus: 00 index 3 [mem 0xe0500000-0xffffffff]

[ 0.148898] bus: 00 index 4 [mem 0xe0100000-0xe04fffff]

[ 0.148899] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]

[ 0.148908] Extended Config Space enabled on 1 nodes

[ 0.148918] ACPI: bus type pci registered

[ 0.148963] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.148965] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[ 0.148967] PCI: Using MMCONFIG for extended config space

[ 0.148968] PCI: Using configuration type 1 for base access

[ 0.149494] bio: create slab at 0

[ 0.150087] ACPI: EC: Look up EC in DSDT

[ 0.156029] ACPI: Interpreter enabled

[ 0.156035] ACPI: (supports S0 S3 S4 S5)

[ 0.156048] ACPI: Using IOAPIC for interrupt routing

[ 0.313517] ACPI: No dock devices found.

[ 0.313519] HEST: Table not found.

[ 0.313522] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.313559] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.313630] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]

[ 0.313632] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]

[ 0.313633] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]

[ 0.313635] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]

[ 0.313637] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]

[ 0.313648] pci 0000:00:00.0: [1002:5958] type 0 class 0x000600

[ 0.313658] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]

[ 0.313685] pci 0000:00:03.0: [1002:5979] type 1 class 0x000604

[ 0.313706] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

[ 0.313708] pci 0000:00:03.0: PME# disabled

[ 0.313719] pci 0000:00:04.0: [1002:597a] type 1 class 0x000604

[ 0.313739] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold

[ 0.313741] pci 0000:00:04.0: PME# disabled

[ 0.313756] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604

[ 0.313777] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold

[ 0.313779] pci 0000:00:0a.0: PME# disabled

[ 0.313802] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101

[ 0.313820] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]

[ 0.313829] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]

[ 0.313837] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]

[ 0.313846] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]

[ 0.313855] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]

[ 0.313864] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]

[ 0.313882] pci 0000:00:11.0: set SATA to AHCI mode

[ 0.313913] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03

[ 0.313925] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]

[ 0.313984] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03

[ 0.313996] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]

[ 0.314059] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03

[ 0.314077] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]

[ 0.314142] pci 0000:00:12.2: supports D1 D2

[ 0.314143] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot

[ 0.314147] pci 0000:00:12.2: PME# disabled

[ 0.314166] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03

[ 0.314178] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]

[ 0.314236] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03

[ 0.314248] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]

[ 0.314312] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03

[ 0.314329] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]

[ 0.314394] pci 0000:00:13.2: supports D1 D2

[ 0.314396] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot

[ 0.314399] pci 0000:00:13.2: PME# disabled

[ 0.314421] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05

[ 0.314506] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101

[ 0.314521] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]

[ 0.314530] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]

[ 0.314538] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]

[ 0.314547] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]

[ 0.314555] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]

[ 0.314601] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403

[ 0.314621] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]

[ 0.314675] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold

[ 0.314678] pci 0000:00:14.2: PME# disabled

[ 0.314690] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601

[ 0.314759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604

[ 0.314795] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03

[ 0.314807] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]

[ 0.314868] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600

[ 0.314879] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600

[ 0.314889] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600

[ 0.314899] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600

[ 0.314910] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600

[ 0.314953] pci 0000:01:00.0: [1002:9490] type 0 class 0x000300

[ 0.314965] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.314974] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]

[ 0.314980] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]

[ 0.314991] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 0.315006] pci 0000:01:00.0: supports D1 D2

[ 0.315022] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403

[ 0.315034] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]

[ 0.315073] pci 0000:01:00.1: supports D1 D2

[ 0.320038] pci 0000:00:03.0: PCI bridge to [bus 01-01]

[ 0.320042] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]

[ 0.320045] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]

[ 0.320048] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.320082] pci 0000:02:00.0: [197b:2363] type 0 class 0x000101

[ 0.320145] pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]

[ 0.320178] pci 0000:02:00.0: PME# supported from D3hot

[ 0.320181] pci 0000:02:00.0: PME# disabled

[ 0.320203] pci 0000:02:00.1: [197b:2363] type 0 class 0x000101

[ 0.320220] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07]

[ 0.320229] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03]

[ 0.320239] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07]

[ 0.320249] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03]

[ 0.320258] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f]

[ 0.320308] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.320317] pci 0000:00:04.0: PCI bridge to [bus 02-02]

[ 0.320320] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]

[ 0.320322] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]

[ 0.320325] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]

[ 0.320354] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200

[ 0.320366] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]

[ 0.320385] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]

[ 0.320398] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]

[ 0.320406] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 0.320432] pci 0000:03:00.0: supports D1 D2

[ 0.320433] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.320436] pci 0000:03:00.0: PME# disabled

[ 0.328039] pci 0000:00:0a.0: PCI bridge to [bus 03-03]

[ 0.328043] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]

[ 0.328045] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]

[ 0.328048] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]

[ 0.328094] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00

[ 0.328116] pci 0000:04:0e.0: reg 10: [mem 0xfdbff000-0xfdbff7ff]

[ 0.328128] pci 0000:04:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]

[ 0.328206] pci 0000:04:0e.0: supports D1 D2

[ 0.328207] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot

[ 0.328212] pci 0000:04:0e.0: PME# disabled

[ 0.328244] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)

[ 0.328248] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]

[ 0.328251] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]

[ 0.328255] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]

[ 0.328257] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)

[ 0.328258] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)

[ 0.328260] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[ 0.328262] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)

[ 0.328263] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)

[ 0.328274] pci_bus 0000:00: on NUMA node 0

[ 0.328278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.328446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]

[ 0.328490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]

[ 0.328509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]

[ 0.328535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]

[ 0.328557] pci0000:00: Requesting ACPI _OSC control (0x1d)

[ 0.334706] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334733] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334758] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334782] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334830] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334855] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334879] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[ 0.334956] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.334959] vgaarb: loaded

[ 0.335072] SCSI subsystem initialized

[ 0.335112] libata version 3.00 loaded.

[ 0.335138] usbcore: registered new interface driver usbfs

[ 0.335145] usbcore: registered new interface driver hub

[ 0.335161] usbcore: registered new device driver usb

[ 0.335277] wmi: Mapper loaded

[ 0.335278] PCI: Using ACPI for IRQ routing

[ 0.335280] PCI: pci_cache_line_size set to 64 bytes

[ 0.335286] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]

[ 0.335352] reserve RAM buffer: 000000000009f800 - 000000000009ffff

[ 0.335354] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff

[ 0.335414] NetLabel: Initializing

[ 0.335416] NetLabel: domain hash size = 128

[ 0.335417] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.335424] NetLabel: unlabeled traffic allowed by default

[ 0.335447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[ 0.335450] hpet0: 4 comparators, 32-bit 14.318180 MHz counter

[ 0.337038] Switching to clocksource hpet

[ 0.338553] Switched to NOHz mode on CPU #0

[ 0.338669] Switched to NOHz mode on CPU #1

[ 0.339984] AppArmor: AppArmor Filesystem Enabled

[ 0.340011] pnp: PnP ACPI init

[ 0.340020] ACPI: bus type pnp registered

[ 0.340069] pnp 00:00: [bus 00-ff]

[ 0.340072] pnp 00:00: [io 0x0cf8-0x0cff]

[ 0.340073] pnp 00:00: [io 0x0000-0x0cf7 window]

[ 0.340075] pnp 00:00: [io 0x0d00-0xffff window]

[ 0.340076] pnp 00:00: [mem 0x000a0000-0x000bffff window]

[ 0.340078] pnp 00:00: [mem 0x000c0000-0x000dffff window]

[ 0.340079] pnp 00:00: [mem 0xd0000000-0xfebfffff window]

[ 0.340108] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)

[ 0.340115] pnp 00:01: [io 0x0010-0x001f]

[ 0.340116] pnp 00:01: [io 0x0022-0x003f]

[ 0.340117] pnp 00:01: [io 0x0044-0x005f]

[ 0.340119] pnp 00:01: [io 0x0062-0x0063]

[ 0.340120] pnp 00:01: [io 0x0065-0x006f]

[ 0.340121] pnp 00:01: [io 0x0074-0x007f]

[ 0.340122] pnp 00:01: [io 0x0091-0x0093]

[ 0.340124] pnp 00:01: [io 0x00a2-0x00bf]

[ 0.340125] pnp 00:01: [io 0x00e0-0x00ef]

[ 0.340127] pnp 00:01: [io 0x04d0-0x04d1]

[ 0.340129] pnp 00:01: [io 0x0220-0x0225]

[ 0.340130] pnp 00:01: [io 0x0290-0x0294]

[ 0.340165] system 00:01: [io 0x04d0-0x04d1] has been reserved

[ 0.340167] system 00:01: [io 0x0220-0x0225] has been reserved

[ 0.340169] system 00:01: [io 0x0290-0x0294] has been reserved

[ 0.340171] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.421782] Freeing initrd memory: 17748k freed

[ 0.428112] pnp 00:02: [io 0x4100-0x411f]

[ 0.428115] pnp 00:02: [io 0x0228-0x022f]

[ 0.428116] pnp 00:02: [io 0x040b]

[ 0.428118] pnp 00:02: [io 0x04d6]

[ 0.428119] pnp 00:02: [io 0x0c00-0x0c01]

[ 0.428120] pnp 00:02: [io 0x0c14]

[ 0.428121] pnp 00:02: [io 0x0c50-0x0c52]

[ 0.428122] pnp 00:02: [io 0x0c6c-0x0c6d]

[ 0.428123] pnp 00:02: [io 0x0c6f]

[ 0.428125] pnp 00:02: [io 0x0cd0-0x0cd1]

[ 0.428126] pnp 00:02: [io 0x0cd2-0x0cd3]

[ 0.428127] pnp 00:02: [io 0x0cd4-0x0cdf]

[ 0.428128] pnp 00:02: [io 0x4000-0x40fe]

[ 0.428129] pnp 00:02: [io 0x4210-0x4217]

[ 0.428131] pnp 00:02: [io 0x0b00-0x0b0f]

[ 0.428132] pnp 00:02: [io 0x0b10-0x0b1f]

[ 0.428133] pnp 00:02: [io 0x0b20-0x0b3f]

[ 0.428135] pnp 00:02: [mem 0x00000000-0x00000fff window]

[ 0.428136] pnp 00:02: [mem 0xfee00400-0xfee00fff window]

[ 0.428142] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428168] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]

[ 0.428176] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]

[ 0.428213] system 00:02: [io 0x4100-0x411f] has been reserved

[ 0.428216] system 00:02: [io 0x0228-0x022f] has been reserved

[ 0.428217] system 00:02: [io 0x040b] has been reserved

[ 0.428219] system 00:02: [io 0x04d6] has been reserved

[ 0.428221] system 00:02: [io 0x0c00-0x0c01] has been reserved

[ 0.428222] system 00:02: [io 0x0c14] has been reserved

[ 0.428224] system 00:02: [io 0x0c50-0x0c52] has been reserved

[ 0.428225] system 00:02: [io 0x0c6c-0x0c6d] has been reserved

[ 0.428227] system 00:02: [io 0x0c6f] has been reserved

[ 0.428229] system 00:02: [io 0x0cd0-0x0cd1] has been reserved

[ 0.428230] system 00:02: [io 0x0cd2-0x0cd3] has been reserved

[ 0.428232] system 00:02: [io 0x0cd4-0x0cdf] has been reserved

[ 0.428234] system 00:02: [io 0x4000-0x40fe] has been reserved

[ 0.428235] system 00:02: [io 0x4210-0x4217] has been reserved

[ 0.428237] system 00:02: [io 0x0b00-0x0b0f] has been reserved

[ 0.428239] system 00:02: [io 0x0b10-0x0b1f] has been reserved

[ 0.428240] system 00:02: [io 0x0b20-0x0b3f] has been reserved

[ 0.428242] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved

[ 0.428245] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.428311] pnp 00:03: [dma 4]

[ 0.428312] pnp 00:03: [io 0x0000-0x000f]

[ 0.428313] pnp 00:03: [io 0x0080-0x0090]

[ 0.428315] pnp 00:03: [io 0x0094-0x009f]

[ 0.428316] pnp 00:03: [io 0x00c0-0x00df]

[ 0.428334] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)

[ 0.428358] pnp 00:04: [irq 0 disabled]

[ 0.428369] pnp 00:04: [irq 8]

[ 0.428370] pnp 00:04: [mem 0xfed00000-0xfed003ff]

[ 0.428388] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)

[ 0.428405] pnp 00:05: [io 0x0070-0x0073]

[ 0.428422] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.428427] pnp 00:06: [io 0x0061]

[ 0.428444] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)

[ 0.428449] pnp 00:07: [io 0x00f0-0x00ff]

[ 0.428455] pnp 00:07: [irq 13]

[ 0.428476] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 0.428574] pnp 00:08: [io 0x03f0-0x03f5]

[ 0.428575] pnp 00:08: [io 0x03f7]

[ 0.428582] pnp 00:08: [irq 6]

[ 0.428583] pnp 00:08: [dma 2]

[ 0.428614] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)

[ 0.428728] pnp 00:09: [io 0x03f8-0x03ff]

[ 0.428735] pnp 00:09: [irq 4]

[ 0.428769] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)

[ 0.428803] pnp 00:0a: [mem 0xe0000000-0xefffffff]

[ 0.428836] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved

[ 0.428838] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.428908] pnp 00:0b: [mem 0x000cf400-0x000cffff]

[ 0.428909] pnp 00:0b: [mem 0x000f0000-0x000f7fff]

[ 0.428910] pnp 00:0b: [mem 0x000f8000-0x000fbfff]

[ 0.428912] pnp 00:0b: [mem 0x000fc000-0x000fffff]

[ 0.428913] pnp 00:0b: [mem 0xcfee0000-0xcfefffff]

[ 0.428915] pnp 00:0b: [mem 0xffff0000-0xffffffff]

[ 0.428916] pnp 00:0b: [mem 0x00000000-0x0009ffff]

[ 0.428917] pnp 00:0b: [mem 0x00100000-0xcfedffff]

[ 0.428919] pnp 00:0b: [mem 0xfec00000-0xfec00fff]

[ 0.428920] pnp 00:0b: [mem 0xfee00000-0xfee00fff]

[ 0.428921] pnp 00:0b: [mem 0xfff80000-0xfffeffff]

[ 0.428924] pnp 00:0b: disabling [mem 0x000cf400-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428927] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428929] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428931] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428934] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428936] pnp 00:0b: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[ 0.428976] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved

[ 0.428978] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved

[ 0.428980] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 0.428982] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved

[ 0.428984] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved

[ 0.428986] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 0.428998] pnp: PnP ACPI: found 12 devices

[ 0.428999] ACPI: ACPI bus type pnp unregistered

[ 0.429002] PnPBIOS: Disabled by ACPI PNP

[ 0.464518] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]

[ 0.464521] pci 0000:00:03.0: PCI bridge to [bus 01-01]

[ 0.464523] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]

[ 0.464525] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]

[ 0.464527] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.464530] pci 0000:00:04.0: PCI bridge to [bus 02-02]

[ 0.464532] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]

[ 0.464535] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]

[ 0.464537] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]

[ 0.464541] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]

[ 0.464542] pci 0000:00:0a.0: PCI bridge to [bus 03-03]

[ 0.464544] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]

[ 0.464546] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]

[ 0.464548] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]

[ 0.464551] pci 0000:00:14.4: PCI bridge to [bus 04-04]

[ 0.464554] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]

[ 0.464558] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]

[ 0.464562] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]

[ 0.464577] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[ 0.464580] pci 0000:00:03.0: setting latency timer to 64

[ 0.464588] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.464590] pci 0000:00:04.0: setting latency timer to 64

[ 0.464599] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 0.464601] pci 0000:00:0a.0: setting latency timer to 64

[ 0.464607] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]

[ 0.464609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]

[ 0.464610] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.464612] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]

[ 0.464613] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]

[ 0.464615] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]

[ 0.464616] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]

[ 0.464618] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.464620] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]

[ 0.464621] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]

[ 0.464623] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]

[ 0.464625] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]

[ 0.464626] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]

[ 0.464628] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]

[ 0.464630] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]

[ 0.464631] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]

[ 0.464633] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]

[ 0.464634] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]

[ 0.464636] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]

[ 0.464637] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.464639] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]

[ 0.464640] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]

[ 0.464665] NET: Registered protocol family 2

[ 0.464707] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.464850] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.465194] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.465367] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.465368] TCP reno registered

[ 0.465370] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.465377] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.465424] NET: Registered protocol family 1

[ 1.292035] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184

[ 1.376049] pci 0000:01:00.0: Boot video device

[ 1.376062] PCI: CLS 4 bytes, default 64

[ 1.376224] cpufreq-nforce2: No nForce2 chipset.

[ 1.376304] audit: initializing netlink socket (disabled)

[ 1.376311] type=2000 audit(1304619183.372:1): initialized

[ 1.382876] highmem bounce pool size: 64 pages

[ 1.382879] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 1.383941] VFS: Disk quotas dquot_6.5.2

[ 1.383979] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 1.384432] fuse init (API version 7.16)

[ 1.384497] msgmni has been set to 1638

[ 1.384710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 1.384738] io scheduler noop registered

[ 1.384740] io scheduler deadline registered

[ 1.384753] io scheduler cfq registered (default)

[ 1.384827] pcieport 0000:00:03.0: setting latency timer to 64

[ 1.384851] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X

[ 1.384880] pcieport 0000:00:04.0: setting latency timer to 64

[ 1.384897] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X

[ 1.384925] pcieport 0000:00:0a.0: setting latency timer to 64

[ 1.384942] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X

[ 1.384987] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 1.385001] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 1.385090] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0

[ 1.385093] ACPI: Power Button [PWRB]

[ 1.385124] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[ 1.385126] ACPI: Power Button [PWRF]

[ 1.385224] ACPI: acpi_idle registered with cpuidle

[ 1.412582] ERST: Table is not found!

[ 1.412618] isapnp: Scanning for PnP cards...

[ 1.412645] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[ 1.433073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.766346] isapnp: No Plug & Play device found

[ 1.860600] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.864197] Linux agpgart interface v0.103

[ 1.865048] brd: module loaded

[ 1.865364] loop: module loaded

[ 1.865415] i2c-core: driver [adp5520] using legacy suspend method

[ 1.865416] i2c-core: driver [adp5520] using legacy resume method

[ 1.865503] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.865534] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)

[ 1.865545] pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 1.865558] pata_acpi 0000:02:00.1: setting latency timer to 64

[ 1.865565] pata_acpi 0000:02:00.1: PCI INT B disabled

[ 1.865750] Fixed MDIO Bus: probed

[ 1.865768] PPP generic driver version 2.4.2

[ 1.865790] tun: Universal TUN/TAP device driver, 1.6

[ 1.865791] tun: (C) 1999-2004 Max Krasnyansky

[ 1.865840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.865850] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 1.865859] ehci_hcd 0000:00:12.2: EHCI Host Controller

[ 1.865881] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1

[ 1.865926] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[ 1.865937] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround

[ 1.865949] ehci_hcd 0000:00:12.2: debug port 1

[ 1.865974] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000

[ 1.876028] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00

[ 1.876115] hub 1-0:1.0: USB hub found

[ 1.876118] hub 1-0:1.0: 6 ports detected

[ 1.876178] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 1.876188] ehci_hcd 0000:00:13.2: EHCI Host Controller

[ 1.876213] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2

[ 1.876243] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[ 1.876256] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround

[ 1.876268] ehci_hcd 0000:00:13.2: debug port 1

[ 1.876291] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000

[ 1.888027] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00

[ 1.888118] hub 2-0:1.0: USB hub found

[ 1.888121] hub 2-0:1.0: 6 ports detected

[ 1.888175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.888186] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.888197] ohci_hcd 0000:00:12.0: OHCI Host Controller

[ 1.888218] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3

[ 1.888278] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000

[ 1.948080] hub 3-0:1.0: USB hub found

[ 1.948086] hub 3-0:1.0: 3 ports detected

[ 1.948136] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.948145] ohci_hcd 0000:00:12.1: OHCI Host Controller

[ 1.948168] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4

[ 1.952057] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000

[ 2.012082] hub 4-0:1.0: USB hub found

[ 2.012087] hub 4-0:1.0: 3 ports detected

[ 2.012137] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 2.012147] ohci_hcd 0000:00:13.0: OHCI Host Controller

[ 2.012169] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5

[ 2.016070] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000

[ 2.076090] hub 5-0:1.0: USB hub found

[ 2.076095] hub 5-0:1.0: 3 ports detected

[ 2.076146] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 2.076155] ohci_hcd 0000:00:13.1: OHCI Host Controller

[ 2.076177] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6

[ 2.076214] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000

[ 2.136122] hub 6-0:1.0: USB hub found

[ 2.136127] hub 6-0:1.0: 3 ports detected

[ 2.136178] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 2.136188] ohci_hcd 0000:00:14.5: OHCI Host Controller

[ 2.136209] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7

[ 2.136247] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000

[ 2.188028] usb 1-1: new high speed USB device using ehci_hcd and address 2

[ 2.196087] hub 7-0:1.0: USB hub found

[ 2.196092] hub 7-0:1.0: 2 ports detected

[ 2.196141] uhci_hcd: USB Universal Host Controller Interface driver

[ 2.196187] i8042: PNP: No PS/2 controller found. Probing ports directly.

[ 2.230274] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?

[ 2.230276] i8042: If AUX port is really absent please use the 'i8042.noaux' option

[ 2.376022] Refined TSC clocksource calibration: 3415.554 MHz.

[ 2.376025] Switching to clocksource tsc

[ 2.480101] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 2.480170] mousedev: PS/2 mouse device common for all mice

[ 2.480246] rtc_cmos 00:05: RTC can wake from S4

[ 2.480303] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0

[ 2.480334] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs

[ 2.480387] device-mapper: uevent: version 1.0.3

[ 2.480434] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com

[ 2.480485] device-mapper: multipath: version 1.2.0 loaded

[ 2.480487] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 2.480532] EISA: Probing bus 0 at eisa.0

[ 2.480533] EISA: Cannot allocate resource for mainboard

[ 2.480535] Cannot allocate resource for EISA slot 1

[ 2.480536] Cannot allocate resource for EISA slot 2

[ 2.480537] Cannot allocate resource for EISA slot 3

[ 2.480538] Cannot allocate resource for EISA slot 4

[ 2.480539] Cannot allocate resource for EISA slot 5

[ 2.480540] Cannot allocate resource for EISA slot 6

[ 2.480541] Cannot allocate resource for EISA slot 7

[ 2.480542] Cannot allocate resource for EISA slot 8

[ 2.480544] EISA: Detected 0 cards.

[ 2.480583] cpuidle: using governor ladder

[ 2.480584] cpuidle: using governor menu

[ 2.480746] TCP cubic registered

[ 2.480822] NET: Registered protocol family 10

[ 2.481166] NET: Registered protocol family 17

[ 2.481175] Registering the dns_resolver key type

[ 2.481191] powernow-k8: Found 1 AMD Phenom(tm) II X2 550 Processor (2 cpu cores) (version 2.20.00)

[ 2.481197] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.

[ 2.481198] [Firmware Bug]: powernow-k8: Try again with latest BIOS.

[ 2.481208] Using IPI No-Shortcut mode

[ 2.481257] PM: Hibernation image not present or could not be loaded.

[ 2.481263] registered taskstats version 1

[ 2.481463] Magic number: 11:445:240

[ 2.481515] rtc_cmos 00:05: setting system clock to 2011-05-05 18:13:04 UTC (1304619184)

[ 2.481517] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 2.481518] EDD information not available.

[ 2.481594] Freeing unused kernel memory: 720k freed

[ 2.481768] Write protecting the kernel text: 5352k

[ 2.481802] Write protecting the kernel read-only data: 2188k

[ 2.481804] NX-protecting the kernel data: 4888k

[ 2.496177] <30>udev[64]: starting version 167

[ 2.533785] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 2.533809] pata_jmicron 0000:02:00.1: setting latency timer to 64

[ 2.563817] scsi0 : pata_jmicron

[ 2.564734] scsi2 : pata_atiixp

[ 2.564784] scsi1 : pata_jmicron

[ 2.564811] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17

[ 2.564814] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17

[ 2.565621] scsi3 : pata_atiixp

[ 2.565993] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14

[ 2.565995] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15

[ 2.568616] Floppy drive(s): fd0 is 1.44M

[ 2.570722] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 2.570736] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 2.570763] r8169 0000:03:00.0: setting latency timer to 64

[ 2.570800] r8169 0000:03:00.0: irq 43 for MSI/MSI-X

[ 2.571111] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf84ca000, 00:24:1d:1d:4f:73, XID 081000c0 IRQ 43

[ 2.584393] [drm] Initialized drm 1.1.0 20060810

[ 2.586161] ahci 0000:00:11.0: version 3.0

[ 2.586179] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 2.586269] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode

[ 2.586271] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc

[ 2.587752] scsi4 : ahci

[ 2.587822] scsi5 : ahci

[ 2.587887] scsi6 : ahci

[ 2.587917] FDC 0 is a post-1991 82077

[ 2.587975] scsi7 : ahci

[ 2.588066] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22

[ 2.588069] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22

[ 2.588072] ata7: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22

[ 2.588075] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22

[ 2.588108] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 2.604051] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode

[ 2.604054] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part

[ 2.604059] ahci 0000:02:00.0: setting latency timer to 64

[ 2.604292] scsi8 : ahci

[ 2.604338] scsi9 : ahci

[ 2.604372] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16

[ 2.604375] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16

[ 2.732787] ata3.00: ATAPI: _NEC DVD_RW ND-2500A, 1.06, max UDMA/33

[ 2.748453] ata3.00: configured for UDMA/33

[ 2.750387] ata4.00: HPA detected: current 62531183, native 62533296

[ 2.750391] ata4.00: ATA-7: OCZ-VERTEX v1.10, 1370, max UDMA/133

[ 2.750393] ata4.00: 62531183 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 2.750493] ata4.01: ATA-8: OCZ VERTEX-TURBO, 1.5, max UDMA/133

[ 2.750494] ata4.01: 125045424 sectors, multi 1: LBA48 NCQ (depth 0/32)

[ 2.756418] ata4.00: configured for UDMA/100

[ 2.772428] ata4.01: configured for UDMA/100

[ 2.860028] usb 4-1: new full speed USB device using ohci_hcd and address 2

[ 2.888144] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-2500A 1.06 PQ: 0 ANSI: 5

[ 2.889448] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

[ 2.889451] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 2.889534] sr 2:0:0:0: Attached scsi CD-ROM sr0

[ 2.889581] sr 2:0:0:0: Attached scsi generic sg0 type 5

[ 2.889719] scsi 3:0:0:0: Direct-Access ATA OCZ-VERTEX v1.10 1370 PQ: 0 ANSI: 5

[ 2.889797] sd 3:0:0:0: [sda] 62531183 512-byte logical blocks: (32.0 GB/29.8 GiB)

[ 2.889818] sd 3:0:0:0: Attached scsi generic sg1 type 0

[ 2.889834] sd 3:0:0:0: [sda] Write Protect is off

[ 2.889836] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 2.889849] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.889871] scsi 3:0:1:0: Direct-Access ATA OCZ VERTEX-TURBO 1.5 PQ: 0 ANSI: 5

[ 2.889964] sd 3:0:1:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)

[ 2.889977] sd 3:0:1:0: Attached scsi generic sg2 type 0

[ 2.890014] sd 3:0:1:0: [sdb] Write Protect is off

[ 2.890016] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[ 2.890027] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.908034] ata8: SATA link down (SStatus 0 SControl 300)

[ 2.908088] ata5: SATA link down (SStatus 0 SControl 300)

[ 2.924040] ata9: SATA link down (SStatus 0 SControl 300)

[ 2.924068] ata10: SATA link down (SStatus 0 SControl 300)

[ 2.983326] sdb: sdb1 sdb2 < sdb5 >

[ 2.983582] sda: sda1 sda2 < sda5 > sda3

[ 2.983799] sd 3:0:0:0: [sda] Attached SCSI disk

[ 2.983830] sd 3:0:1:0: [sdb] Attached SCSI disk

[ 3.064212] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input2

[ 3.064273] generic-usb 0003:046D:C041.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:12.1-1/input0

[ 3.075170] generic-usb 0003:046D:C041.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:12.1-1/input1

[ 3.075179] usbcore: registered new interface driver usbhid

[ 3.075180] usbhid: USB HID core driver

[ 3.136018] ata6: softreset failed (device not ready)

[ 3.136021] ata6: applying SB600 PMP SRST workaround and retrying

[ 3.308010] usb 6-2: new low speed USB device using ohci_hcd and address 2

[ 3.308025] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 3.308783] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133

[ 3.308785] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 3.309446] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x100)

[ 3.309448] ata6.00: revalidation failed (errno=-5)

[ 3.516088] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3

[ 3.516141] generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.1-2/input0

[ 3.538212] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input4

[ 3.538258] generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.1-2/input1

[ 8.480019] ata7: softreset failed (device not ready)

[ 8.480022] ata7: applying SB600 PMP SRST workaround and retrying

[ 8.652023] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 8.653924] ata7.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.09, max UDMA/66

[ 8.656139] ata7.00: configured for UDMA/66

[ 8.800018] ata6: softreset failed (device not ready)

[ 8.800021] ata6: applying SB600 PMP SRST workaround and retrying

[ 8.972026] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 8.973643] ata6.00: configured for UDMA/133

[ 8.973719] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 8.973811] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 8.973892] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 8.973946] sd 5:0:0:0: [sdc] Write Protect is off

[ 8.973948] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 8.973971] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 8.988728] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 8.988730] ata6.00: irq_stat 0x08000000, interface fatal error

[ 8.988733] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 8.988735] ata6.00: failed command: READ FPDMA QUEUED

[ 8.988739] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 8.988740] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 8.988741] ata6.00: status: { DRDY }

[ 8.988744] ata6: hard resetting link

[ 9.005132] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.09 PQ: 0 ANSI: 5

[ 9.036383] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

[ 9.036457] sr 6:0:0:0: Attached scsi CD-ROM sr1

[ 9.036495] sr 6:0:0:0: Attached scsi generic sg4 type 5

[ 9.480019] ata6: softreset failed (device not ready)

[ 9.480022] ata6: applying SB600 PMP SRST workaround and retrying

[ 9.652030] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 9.653689] ata6.00: configured for UDMA/133

[ 9.653695] ata6: EH complete

[ 9.666516] ata6: limiting SATA link speed to 1.5 Gbps

[ 9.666518] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen

[ 9.666520] ata6.00: irq_stat 0x08000000, interface fatal error

[ 9.666522] ata6: SError: { UnrecovData HostInt 10B8B BadCRC }

[ 9.666524] ata6.00: failed command: READ FPDMA QUEUED

[ 9.666528] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 9.666528] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 9.666530] ata6.00: status: { DRDY }

[ 9.666532] ata6: hard resetting link

[ 19.664027] ata6: softreset failed (1st FIS failed)

[ 19.664030] ata6: hard resetting link

[ 29.664027] ata6: softreset failed (1st FIS failed)

[ 29.664030] ata6: hard resetting link

[ 64.664026] ata6: softreset failed (1st FIS failed)

[ 64.664031] ata6: hard resetting link

[ 69.852016] ata6: softreset failed (device not ready)

[ 69.852018] ata6: reset failed, giving up

[ 69.852020] ata6.00: disabled

[ 69.852028] ata6: EH complete

[ 69.852036] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852037] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852040] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852045] end_request: I/O error, dev sdc, sector 0

[ 69.852047] Buffer I/O error on device sdc, logical block 0

[ 69.852079] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852082] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852084] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852090] end_request: I/O error, dev sdc, sector 0

[ 69.852092] Buffer I/O error on device sdc, logical block 0

[ 69.852114] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852115] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852117] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852121] end_request: I/O error, dev sdc, sector 0

[ 69.852123] Buffer I/O error on device sdc, logical block 0

[ 69.852141] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852142] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852144] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852148] end_request: I/O error, dev sdc, sector 0

[ 69.852150] Buffer I/O error on device sdc, logical block 0

[ 69.852167] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852168] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852170] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852174] end_request: I/O error, dev sdc, sector 0

[ 69.852175] Buffer I/O error on device sdc, logical block 0

[ 69.852180] ldm_validate_partition_table(): Disk read failed.

[ 69.852194] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852195] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852197] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852201] end_request: I/O error, dev sdc, sector 0

[ 69.852202] Buffer I/O error on device sdc, logical block 0

[ 69.852219] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852220] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852222] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852226] end_request: I/O error, dev sdc, sector 0

[ 69.852227] Buffer I/O error on device sdc, logical block 0

[ 69.852245] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852246] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852248] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852252] end_request: I/O error, dev sdc, sector 0

[ 69.852253] Buffer I/O error on device sdc, logical block 0

[ 69.852270] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852271] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852273] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852277] end_request: I/O error, dev sdc, sector 0

[ 69.852278] Buffer I/O error on device sdc, logical block 0

[ 69.852283] Dev sdc: unable to read RDB block 0

[ 69.852296] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852297] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852299] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852303] end_request: I/O error, dev sdc, sector 0

[ 69.852305] Buffer I/O error on device sdc, logical block 0

[ 69.852321] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852323] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852325] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852329] end_request: I/O error, dev sdc, sector 0

[ 69.852348] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852349] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852351] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 69.852355] end_request: I/O error, dev sdc, sector 24

[ 69.852367] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852368] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852370] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 69.852375] end_request: I/O error, dev sdc, sector 24

[ 69.852387] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852389] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852390] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852394] end_request: I/O error, dev sdc, sector 0

[ 69.852411] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852413] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852415] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852419] end_request: I/O error, dev sdc, sector 0

[ 69.852424] sdc: unable to read partition table

[ 69.852502] sd 5:0:0:0: [sdc] READ CAPACITY(16) failed

[ 69.852503] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852505] sd 5:0:0:0: [sdc] Sense not available.

[ 69.852532] sd 5:0:0:0: [sdc] READ CAPACITY failed

[ 69.852534] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852536] sd 5:0:0:0: [sdc] Sense not available.

[ 69.852571] sd 5:0:0:0: [sdc] Write Protect is on

[ 69.852573] sd 5:0:0:0: [sdc] Mode Sense: cc cc cc cc

[ 69.852582] sd 5:0:0:0: [sdc] Asking for cache data failed

[ 69.852583] sd 5:0:0:0: [sdc] Assuming drive cache: write through

[ 69.852585] sd 5:0:0:0: [sdc] Attached SCSI disk

[ 69.868668] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 69.892613] [drm] radeon defaulting to kernel modesetting.

[ 69.892615] [drm] radeon kernel modesetting enabled.

[ 69.892667] radeon 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[ 69.892671] radeon 0000:01:00.0: setting latency timer to 64

[ 69.894698] [drm] initializing kernel modesetting (RV730 0x1002:0x9490).

[ 69.894798] [drm] register mmio base: 0xFDEE0000

[ 69.894799] [drm] register mmio size: 65536

[ 69.895917] ATOM BIOS: RV730

[ 69.895935] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)

[ 69.895937] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF

[ 69.897365] [drm] Detected VRAM RAM=512M, BAR=256M

[ 69.897368] [drm] RAM width 128bits DDR

[ 69.898740] [TTM] Zone kernel: Available graphics memory: 419858 kiB.

[ 69.898813] [TTM] Zone highmem: Available graphics memory: 2059734 kiB.

[ 69.898815] [TTM] Initializing pool allocator.

[ 69.898827] [drm] radeon: 512M of VRAM memory ready

[ 69.898828] [drm] radeon: 512M of GTT memory ready.

[ 69.898838] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).

[ 69.898839] [drm] Driver supports precise vblank timestamp query.

[ 69.898871] radeon 0000:01:00.0: irq 44 for MSI/MSI-X

[ 69.898875] radeon 0000:01:00.0: radeon: using MSI.

[ 69.898901] [drm] radeon: irq initialized.

[ 69.898904] [drm] GART: num cpu pages 131072, num gpu pages 131072

[ 69.899856] [drm] Loading RV730 Microcode

[ 69.906930] radeon 0000:01:00.0: WB enabled

[ 69.924161] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2

[ 69.952841] [drm] ring test succeeded in 1 usecs

[ 69.952924] [drm] radeon: ib pool ready.

[ 69.952975] [drm] ib test succeeded in 0 usecs

[ 69.952976] [drm] Enabling audio support

[ 69.952981] failed to evaluate ATIF got AE_BAD_PARAMETER

[ 69.953316] [drm] Radeon Display Connectors

[ 69.953318] [drm] Connector 0:

[ 69.953319] [drm] VGA

[ 69.953321] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c

[ 69.953322] [drm] Encoders:

[ 69.953323] [drm] CRT2: INTERNAL_KLDSCP_DAC2

[ 69.953324] [drm] Connector 1:

[ 69.953325] [drm] HDMI-A

[ 69.953325] [drm] HPD2

[ 69.953327] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c

[ 69.953328] [drm] Encoders:

[ 69.953329] [drm] DFP2: INTERNAL_UNIPHY1

[ 69.953330] [drm] Connector 2:

[ 69.953331] [drm] DVI-I

[ 69.953331] [drm] HPD1

[ 69.953333] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c

[ 69.953334] [drm] Encoders:

[ 69.953335] [drm] CRT1: INTERNAL_KLDSCP_DAC1

[ 69.953336] [drm] DFP1: INTERNAL_UNIPHY

[ 70.010240] [drm] Internal thermal controller with fan control

[ 70.010269] [drm] radeon: power management initialized

[ 70.095735] [drm] fb mappable at 0xD0142000

[ 70.095737] [drm] vram apper at 0xD0000000

[ 70.095738] [drm] size 9216000

[ 70.095739] [drm] fb depth is 24

[ 70.095740] [drm] pitch is 7680

[ 70.095839] Console: switching to colour frame buffer device 240x75

[ 70.095873] fb0: radeondrmfb frame buffer device

[ 70.095874] drm: registered panic notifier

[ 70.095878] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0

[ 70.424079] firewire_core: created device fw0: GUID 001add440000241d, S400

[ 70.853726] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[ 71.107211] Adding 1951740k swap on /dev/sdb5. Priority:-1 extents:1 across:1951740k SS

[ 71.125502] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro

[ 71.290600] <30>udev[492]: starting version 167

[ 71.366702] lp: driver loaded but no devices found

[ 71.430385] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]

[ 71.430387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 71.444661] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01

[ 71.444872] SP5100 TCO timer: mmio address 0xfec000f0 already in use

[ 71.756115] Linux video capture interface: v2.00

[ 71.765843] uvcvideo: Found UVC 1.00 device (046d:09a4)

[ 71.784056] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input5

[ 71.784105] usbcore: registered new interface driver uvcvideo

[ 71.784106] USB Video Class driver (v1.0.0)

[ 71.796837] r8169 0000:03:00.0: eth0: link down

[ 71.796843] r8169 0000:03:00.0: eth0: link down

[ 71.797532] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 71.859038] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 71.886586] set volume quirk for QuickCam E3500

[ 71.887248] usbcore: registered new interface driver snd-usb-audio

[ 71.976625] hda_codec: ALC889A: BIOS auto-probing.

[ 71.985760] vboxdrv: Found 2 processor cores.

[ 71.988425] vboxdrv: fAsync=0 offMin=0x45f offMax=0xf8c

[ 71.988487] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[ 71.988488] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).

[ 72.027163] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6

[ 72.027347] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16

[ 72.027411] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X

[ 72.027516] HDA Intel 0000:01:00.1: setting latency timer to 64

[ 72.299258] ppdev: user-space parallel port driver

[ 72.356502] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0

[ 72.404259] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen

[ 72.404263] ata6: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch }

[ 72.404268] ata6: hard resetting link

[ 73.300025] ata6: softreset failed (device not ready)

[ 73.300029] ata6: applying SB600 PMP SRST workaround and retrying

[ 73.472019] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 73.472838] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133

[ 73.472841] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 73.473711] ata6.00: configured for UDMA/133

[ 73.488024] ata6: EH complete

[ 73.488031] ata6.00: detaching (SCSI 5:0:0:0)

[ 73.500106] sd 5:0:0:0: [sdc] Stopping disk

[ 73.515569] r8169 0000:03:00.0: eth0: link up

[ 73.515734] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 74.375659] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 74.375771] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 74.375779] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 74.375800] sd 5:0:0:0: [sdc] Write Protect is off

[ 74.375802] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 74.375815] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 75.692013] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 75.692016] ata6.00: irq_stat 0x08000000, interface fatal error

[ 75.692019] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 75.692022] ata6.00: failed command: READ FPDMA QUEUED

[ 75.692026] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 75.692026] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 75.692028] ata6.00: status: { DRDY }

[ 75.692031] ata6: hard resetting link

[ 76.184014] ata6: softreset failed (device not ready)

[ 76.184018] ata6: applying SB600 PMP SRST workaround and retrying

[ 76.356025] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 76.357725] ata6.00: configured for UDMA/133

[ 76.372024] ata6: EH complete

[ 76.392053] ata6: limiting SATA link speed to 1.5 Gbps

[ 76.392057] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 76.392059] ata6.00: irq_stat 0x08000000, interface fatal error

[ 76.392061] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 76.392063] ata6.00: failed command: READ FPDMA QUEUED

[ 76.392067] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 76.392068] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 76.392069] ata6.00: status: { DRDY }

[ 76.392073] ata6: hard resetting link

[ 83.544081] eth0: no IPv6 routers present

[ 86.392028] ata6: softreset failed (1st FIS failed)

[ 86.392033] ata6: hard resetting link

[ 96.392029] ata6: softreset failed (1st FIS failed)

[ 96.392033] ata6: hard resetting link

[ 131.392027] ata6: softreset failed (1st FIS failed)

[ 131.392033] ata6: hard resetting link

[ 136.580088] ata6: softreset failed (device not ready)

[ 136.580091] ata6: reset failed, giving up

[ 136.580093] ata6.00: disabled

[ 136.580103] ata6: EH complete

[ 136.580115] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580117] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580119] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580125] end_request: I/O error, dev sdc, sector 0

[ 136.580127] quiet_error: 44 callbacks suppressed

[ 136.580128] Buffer I/O error on device sdc, logical block 0

[ 136.580166] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580169] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580172] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580178] end_request: I/O error, dev sdc, sector 0

[ 136.580181] Buffer I/O error on device sdc, logical block 0

[ 136.580206] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580208] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580210] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580214] end_request: I/O error, dev sdc, sector 0

[ 136.580215] Buffer I/O error on device sdc, logical block 0

[ 136.580234] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580235] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580237] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580241] end_request: I/O error, dev sdc, sector 0

[ 136.580243] Buffer I/O error on device sdc, logical block 0

[ 136.580259] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580261] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580263] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580267] end_request: I/O error, dev sdc, sector 0

[ 136.580268] Buffer I/O error on device sdc, logical block 0

[ 136.580273] ldm_validate_partition_table(): Disk read failed.

[ 136.580287] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580288] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580290] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580294] end_request: I/O error, dev sdc, sector 0

[ 136.580296] Buffer I/O error on device sdc, logical block 0

[ 136.580312] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580313] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580315] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580319] end_request: I/O error, dev sdc, sector 0

[ 136.580321] Buffer I/O error on device sdc, logical block 0

[ 136.580337] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580338] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580340] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580344] end_request: I/O error, dev sdc, sector 0

[ 136.580346] Buffer I/O error on device sdc, logical block 0

[ 136.580362] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580363] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580365] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580369] end_request: I/O error, dev sdc, sector 0

[ 136.580371] Buffer I/O error on device sdc, logical block 0

[ 136.580376] Dev sdc: unable to read RDB block 0

[ 136.580389] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580390] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580392] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580396] end_request: I/O error, dev sdc, sector 0

[ 136.580397] Buffer I/O error on device sdc, logical block 0

[ 136.580414] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580415] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580417] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580421] end_request: I/O error, dev sdc, sector 0

[ 136.580440] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580442] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580443] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 136.580447] end_request: I/O error, dev sdc, sector 24

[ 136.580459] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580461] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580463] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00

[ 136.580467] end_request: I/O error, dev sdc, sector 24

[ 136.580479] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580480] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580482] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580486] end_request: I/O error, dev sdc, sector 0

[ 136.580503] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580505] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580507] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580511] end_request: I/O error, dev sdc, sector 0

[ 136.580516] sdc: unable to read partition table

[ 136.580589] sd 5:0:0:0: [sdc] READ CAPACITY(16) failed

[ 136.580591] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580593] sd 5:0:0:0: [sdc] Sense not available.

[ 136.580607] sd 5:0:0:0: [sdc] READ CAPACITY failed

[ 136.580608] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580610] sd 5:0:0:0: [sdc] Sense not available.

[ 136.580630] sd 5:0:0:0: [sdc] Truncating mode parameter data from 60261 to 512 bytes

[ 136.580636] sd 5:0:0:0: [sdc] Got wrong page

[ 136.580638] sd 5:0:0:0: [sdc] Assuming drive cache: write through

[ 136.580640] sd 5:0:0:0: [sdc] Attached SCSI disk

[ 523.025910] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0

[ 523.031419] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen

[ 523.031423] ata6: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch }

[ 523.031428] ata6: hard resetting link

[ 523.928031] ata6: softreset failed (device not ready)

[ 523.928035] ata6: applying SB600 PMP SRST workaround and retrying

[ 524.100035] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 524.100654] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x100)

[ 529.100115] ata6: hard resetting link

[ 529.100478] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.100481] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.100484] Info fld=0x10, ILI

[ 529.100486] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.100489] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.100494] end_request: I/O error, dev sr1, sector 64

[ 529.100497] quiet_error: 5 callbacks suppressed

[ 529.100499] Buffer I/O error on device sr1, logical block 16

[ 529.100501] Buffer I/O error on device sr1, logical block 17

[ 529.102279] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.102283] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.102285] Info fld=0x10, ILI

[ 529.102287] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.102289] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 01 00

[ 529.102294] end_request: I/O error, dev sr1, sector 64

[ 529.102296] Buffer I/O error on device sr1, logical block 16

[ 529.104333] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.104336] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.104339] Info fld=0x11, ILI

[ 529.104340] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.104342] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 11 00 00 01 00

[ 529.104347] end_request: I/O error, dev sr1, sector 68

[ 529.104349] Buffer I/O error on device sr1, logical block 17

[ 529.554092] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.554097] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.554100] Info fld=0x10, ILI

[ 529.554102] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.554105] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.554110] end_request: I/O error, dev sr1, sector 64

[ 529.554113] Buffer I/O error on device sr1, logical block 16

[ 529.554115] Buffer I/O error on device sr1, logical block 17

[ 529.555890] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.555894] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.555897] Info fld=0x10, ILI

[ 529.555898] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.555902] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.555907] end_request: I/O error, dev sr1, sector 64

[ 529.555909] Buffer I/O error on device sr1, logical block 16

[ 529.555911] Buffer I/O error on device sr1, logical block 17

[ 529.592023] ata6: softreset failed (device not ready)

[ 529.592027] ata6: applying SB600 PMP SRST workaround and retrying

[ 529.592588] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.592592] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.592596] Info fld=0x10, ILI

[ 529.592597] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.592601] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.592606] end_request: I/O error, dev sr1, sector 64

[ 529.592609] Buffer I/O error on device sr1, logical block 16

[ 529.592611] Buffer I/O error on device sr1, logical block 17

[ 529.594368] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.594372] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.594376] Info fld=0x10, ILI

[ 529.594377] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.594380] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 01 00

[ 529.594385] end_request: I/O error, dev sr1, sector 64

[ 529.596210] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.596215] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.596218] Info fld=0x11, ILI

[ 529.596219] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.596223] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 11 00 00 01 00

[ 529.596228] end_request: I/O error, dev sr1, sector 68

[ 529.631344] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.631348] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.631352] Info fld=0x10, ILI

[ 529.631353] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.631357] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.631362] end_request: I/O error, dev sr1, sector 64

[ 529.633186] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.633189] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.633192] Info fld=0x10, ILI

[ 529.633193] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.633196] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.633200] end_request: I/O error, dev sr1, sector 64

[ 529.685345] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.685350] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.685353] Info fld=0x10, ILI

[ 529.685354] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.685358] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.685363] end_request: I/O error, dev sr1, sector 64

[ 529.687153] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 529.687156] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 529.687159] Info fld=0x10, ILI

[ 529.687160] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 529.687164] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 529.687168] end_request: I/O error, dev sr1, sector 64

[ 529.764028] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 529.764797] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133

[ 529.764799] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 529.765671] ata6.00: configured for UDMA/133

[ 529.780012] ata6: EH complete

[ 529.780019] ata6.00: detaching (SCSI 5:0:0:0)

[ 529.796099] sd 5:0:0:0: [sdc] Stopping disk

[ 529.882838] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.

[ 530.296989] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.296993] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.296997] Info fld=0x10, ILI

[ 530.296998] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.297002] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.297007] end_request: I/O error, dev sr1, sector 64

[ 530.298691] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.298694] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.298696] Info fld=0x10, ILI

[ 530.298698] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.298700] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.298705] end_request: I/O error, dev sr1, sector 64

[ 530.377531] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.377535] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.377539] Info fld=0x10, ILI

[ 530.377540] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.377544] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.377549] end_request: I/O error, dev sr1, sector 64

[ 530.379448] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.379451] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.379454] Info fld=0x10, ILI

[ 530.379455] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.379458] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.379462] end_request: I/O error, dev sr1, sector 64

[ 530.417707] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.417711] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.417714] Info fld=0x10, ILI

[ 530.417716] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.417719] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.417724] end_request: I/O error, dev sr1, sector 64

[ 530.419977] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.419980] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.419983] Info fld=0x10, ILI

[ 530.419984] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.419987] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.420016] end_request: I/O error, dev sr1, sector 64

[ 530.455413] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.455417] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.455421] Info fld=0x10, ILI

[ 530.455422] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.455426] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.455431] end_request: I/O error, dev sr1, sector 64

[ 530.457246] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.457249] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.457252] Info fld=0x10, ILI

[ 530.457253] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.457256] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.457261] end_request: I/O error, dev sr1, sector 64

[ 530.493692] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.493696] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.493699] Info fld=0x10, ILI

[ 530.493701] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.493705] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.493710] end_request: I/O error, dev sr1, sector 64

[ 530.495474] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 530.495477] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current]

[ 530.495480] Info fld=0x10, ILI

[ 530.495481] sr 6:0:0:0: [sr1] Add. Sense: Illegal mode for this track

[ 530.495484] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00

[ 530.495488] end_request: I/O error, dev sr1, sector 64

[ 530.671971] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 530.672139] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 530.672503] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 530.672579] sd 5:0:0:0: [sdc] Write Protect is off

[ 530.672581] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 530.672593] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 530.740068] 2:3:1: cannot set freq 16000 to ep 0x86

[ 531.740091] 2:3:1: cannot set freq 16000 to ep 0x86

[ 531.990440] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen

[ 531.990443] ata6.00: irq_stat 0x08000000, interface fatal error

[ 531.990446] ata6: SError: { UnrecovData HostInt 10B8B BadCRC }

[ 531.990449] ata6.00: failed command: READ FPDMA QUEUED

[ 531.990452] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 531.990453] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 531.990455] ata6.00: status: { DRDY }

[ 531.990459] ata6: hard resetting link

[ 532.484014] ata6: softreset failed (device not ready)

[ 532.484018] ata6: applying SB600 PMP SRST workaround and retrying

[ 532.656027] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 532.657685] ata6.00: configured for UDMA/133

[ 532.672029] ata6: EH complete

[ 532.690562] ata6: limiting SATA link speed to 1.5 Gbps

[ 532.690565] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen

[ 532.690568] ata6.00: irq_stat 0x08000000, interface fatal error

[ 532.690570] ata6: SError: { UnrecovData HostInt 10B8B BadCRC }

[ 532.690573] ata6.00: failed command: READ FPDMA QUEUED

[ 532.690577] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 532.690577] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 532.690604] ata6.00: status: { DRDY }

[ 532.690607] ata6: hard resetting link

[ 532.740118] 2:3:1: cannot set freq 16000 to ep 0x86

[ 533.740143] 2:3:1: cannot set freq 16000 to ep 0x86

[ 534.740056] 2:3:1: cannot set freq 16000 to ep 0x86

[ 535.740069] 2:3:1: cannot set freq 16000 to ep 0x86

[ 536.740094] 2:3:1: cannot set freq 16000 to ep 0x86

[ 537.740121] 2:3:1: cannot set freq 16000 to ep 0x86

[ 538.740147] 2:3:1: cannot set freq 16000 to ep 0x86

[ 539.740048] 2:3:1: cannot set freq 16000 to ep 0x86

[ 540.740074] 2:3:1: cannot set freq 16000 to ep 0x86

[ 541.740100] 2:3:1: cannot set freq 16000 to ep 0x86

[ 542.688036] ata6: softreset failed (1st FIS failed)

[ 542.688041] ata6: hard resetting link

[ 542.740125] 2:3:1: cannot set freq 16000 to ep 0x86

[ 543.740153] 2:3:1: cannot set freq 16000 to ep 0x86

[ 544.740179] 2:3:1: cannot set freq 16000 to ep 0x86

[ 545.740080] 2:3:1: cannot set freq 16000 to ep 0x86

[ 546.740106] 2:3:1: cannot set freq 16000 to ep 0x86

[ 547.740132] 2:3:1: cannot set freq 16000 to ep 0x86

[ 548.740033] 2:3:1: cannot set freq 16000 to ep 0x86

[ 549.740059] 2:3:1: cannot set freq 16000 to ep 0x86

[ 550.996190] 2:3:1: cannot set freq 16000 to ep 0x86

[ 551.996088] 2:3:1: cannot set freq 16000 to ep 0x86

[ 552.692031] ata6: softreset failed (1st FIS failed)

[ 552.692036] ata6: hard resetting link

[ 552.996116] 2:3:1: cannot set freq 16000 to ep 0x86

[ 553.996153] 2:3:1: cannot set freq 16000 to ep 0x86

[ 554.996167] 2:3:1: cannot set freq 16000 to ep 0x86

[ 555.996193] 2:3:1: cannot set freq 16000 to ep 0x86

[ 556.996094] 2:3:1: cannot set freq 16000 to ep 0x86

[ 557.996123] 2:3:1: cannot set freq 16000 to ep 0x86



Problemet kunne bestemt ligne dette:

http://kubuntuforums.net/forums/index.php?topic=3116527.0



Dog får jeg ikke løsningen til at virke ...

Efter boot



Et par udvalgte bidder af

dmesg > tmp.tmp





[ 3.516141] generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.1-2/input0

[ 3.538212] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input4

[ 3.538258] generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.1-2/input1

[ 8.480019] ata7: softreset failed (device not ready)

[ 8.480022] ata7: applying SB600 PMP SRST workaround and retrying

[ 8.652023] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 8.653924] ata7.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.09, max UDMA/66

[ 8.656139] ata7.00: configured for UDMA/66

[ 8.800018] ata6: softreset failed (device not ready)

[ 8.800021] ata6: applying SB600 PMP SRST workaround and retrying

[ 8.972026] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 8.973643] ata6.00: configured for UDMA/133

[ 8.973719] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 8.973811] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 8.973892] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 8.973946] sd 5:0:0:0: [sdc] Write Protect is off

[ 8.973948] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 8.973971] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 8.988728] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 8.988730] ata6.00: irq_stat 0x08000000, interface fatal error

[ 8.988733] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 8.988735] ata6.00: failed command: READ FPDMA QUEUED

[ 8.988739] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 8.988740] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 8.988741] ata6.00: status: { DRDY }

[ 8.988744] ata6: hard resetting link

[ 9.005132] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.09 PQ: 0 ANSI: 5

[ 9.036383] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

[ 9.036457] sr 6:0:0:0: Attached scsi CD-ROM sr1

[ 9.036495] sr 6:0:0:0: Attached scsi generic sg4 type 5

[ 9.480019] ata6: softreset failed (device not ready)

[ 9.480022] ata6: applying SB600 PMP SRST workaround and retrying

[ 9.652030] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 9.653689] ata6.00: configured for UDMA/133

[ 9.653695] ata6: EH complete

[ 9.666516] ata6: limiting SATA link speed to 1.5 Gbps

[ 9.666518] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen

[ 9.666520] ata6.00: irq_stat 0x08000000, interface fatal error

[ 9.666522] ata6: SError: { UnrecovData HostInt 10B8B BadCRC }

[ 9.666524] ata6.00: failed command: READ FPDMA QUEUED

[ 9.666528] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 9.666528] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 9.666530] ata6.00: status: { DRDY }

[ 9.666532] ata6: hard resetting link

[ 19.664027] ata6: softreset failed (1st FIS failed)

[ 19.664030] ata6: hard resetting link

[ 29.664027] ata6: softreset failed (1st FIS failed)

[ 29.664030] ata6: hard resetting link

[ 64.664026] ata6: softreset failed (1st FIS failed)

[ 64.664031] ata6: hard resetting link

[ 69.852016] ata6: softreset failed (device not ready)

[ 69.852018] ata6: reset failed, giving up

[ 69.852020] ata6.00: disabled

[ 69.852028] ata6: EH complete

[ 69.852036] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852037] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852040] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852045] end_request: I/O error, dev sdc, sector 0

[ 69.852047] Buffer I/O error on device sdc, logical block 0

[ 69.852079] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852082] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852084] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852090] end_request: I/O error, dev sdc, sector 0

[ 69.852092] Buffer I/O error on device sdc, logical block 0

[ 69.852114] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852115] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.852117] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 69.852121] end_request: I/O error, dev sdc, sector 0

[ 69.852123] Buffer I/O error on device sdc, logical block 0

[ 69.852141] sd 5:0:0:0: [sdc] Unhandled error code

[ 69.852142] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 69.953322] [drm] Encoders:

[ 69.953323] [drm] CRT2: INTERNAL_KLDSCP_DAC2

[ 69.953324] [drm] Connector 1:

[ 69.953325] [drm] HDMI-A

[ 69.953325] [drm] HPD2

[ 69.953327] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c

[ 69.953328] [drm] Encoders:

[ 69.953329] [drm] DFP2: INTERNAL_UNIPHY1

[ 69.953330] [drm] Connector 2:

[ 69.953331] [drm] DVI-I

[ 69.953331] [drm] HPD1

[ 69.953333] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c

[ 69.953334] [drm] Encoders:

[ 69.953335] [drm] CRT1: INTERNAL_KLDSCP_DAC1

[ 69.953336] [drm] DFP1: INTERNAL_UNIPHY

[ 70.010240] [drm] Internal thermal controller with fan control

[ 70.010269] [drm] radeon: power management initialized

[ 70.095735] [drm] fb mappable at 0xD0142000

[ 70.095737] [drm] vram apper at 0xD0000000

[ 70.095738] [drm] size 9216000

[ 70.095739] [drm] fb depth is 24

[ 70.095740] [drm] pitch is 7680

[ 70.095839] Console: switching to colour frame buffer device 240x75

[ 70.095873] fb0: radeondrmfb frame buffer device

[ 70.095874] drm: registered panic notifier

[ 70.095878] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0

[ 70.424079] firewire_core: created device fw0: GUID 001add440000241d, S400

[ 70.853726] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[ 71.107211] Adding 1951740k swap on /dev/sdb5. Priority:-1 extents:1 across:1951740k SS

[ 71.125502] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro

[ 71.290600] <30>udev[492]: starting version 167

[ 71.366702] lp: driver loaded but no devices found

[ 71.430385] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]

[ 71.430387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 71.444661] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01

[ 71.444872] SP5100 TCO timer: mmio address 0xfec000f0 already in use

[ 71.756115] Linux video capture interface: v2.00

[ 71.765843] uvcvideo: Found UVC 1.00 device (046d:09a4)

[ 71.784056] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input5

[ 71.784105] usbcore: registered new interface driver uvcvideo

[ 71.784106] USB Video Class driver (v1.0.0)

[ 71.796837] r8169 0000:03:00.0: eth0: link down

[ 71.796843] r8169 0000:03:00.0: eth0: link down

[ 71.797532] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 71.859038] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 71.886586] set volume quirk for QuickCam E3500

[ 71.887248] usbcore: registered new interface driver snd-usb-audio

[ 71.976625] hda_codec: ALC889A: BIOS auto-probing.

[ 71.985760] vboxdrv: Found 2 processor cores.

[ 71.988425] vboxdrv: fAsync=0 offMin=0x45f offMax=0xf8c

[ 71.988487] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[ 71.988488] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).

[ 72.027163] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6

[ 72.027347] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16

[ 72.027411] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X

[ 72.027516] HDA Intel 0000:01:00.1: setting latency timer to 64

[ 72.299258] ppdev: user-space parallel port driver

[ 72.356502] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0

[ 72.404259] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0202 action 0xe frozen

[ 72.404263] ata6: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch }

[ 72.404268] ata6: hard resetting link

[ 73.300025] ata6: softreset failed (device not ready)

[ 73.300029] ata6: applying SB600 PMP SRST workaround and retrying

[ 73.472019] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 73.472838] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133

[ 73.472841] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 73.473711] ata6.00: configured for UDMA/133

[ 73.488024] ata6: EH complete

[ 73.488031] ata6.00: detaching (SCSI 5:0:0:0)

[ 73.500106] sd 5:0:0:0: [sdc] Stopping disk

[ 73.515569] r8169 0000:03:00.0: eth0: link up

[ 73.515734] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 74.375659] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5

[ 74.375771] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 74.375779] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 74.375800] sd 5:0:0:0: [sdc] Write Protect is off

[ 74.375802] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 74.375815] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 75.692013] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 75.692016] ata6.00: irq_stat 0x08000000, interface fatal error

[ 75.692019] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 75.692022] ata6.00: failed command: READ FPDMA QUEUED

[ 75.692026] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 75.692026] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 75.692028] ata6.00: status: { DRDY }

[ 75.692031] ata6: hard resetting link

[ 76.184014] ata6: softreset failed (device not ready)

[ 76.184018] ata6: applying SB600 PMP SRST workaround and retrying

[ 76.356025] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 76.357725] ata6.00: configured for UDMA/133

[ 76.372024] ata6: EH complete

[ 76.392053] ata6: limiting SATA link speed to 1.5 Gbps

[ 76.392057] ata6.00: exception Emask 0x50 SAct 0x1 SErr 0x280901 action 0x6 frozen

[ 76.392059] ata6.00: irq_stat 0x08000000, interface fatal error

[ 76.392061] ata6: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }

[ 76.392063] ata6.00: failed command: READ FPDMA QUEUED

[ 76.392067] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in

[ 76.392068] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)

[ 76.392069] ata6.00: status: { DRDY }

[ 76.392073] ata6: hard resetting link

[ 83.544081] eth0: no IPv6 routers present

[ 86.392028] ata6: softreset failed (1st FIS failed)

[ 86.392033] ata6: hard resetting link

[ 96.392029] ata6: softreset failed (1st FIS failed)

[ 96.392033] ata6: hard resetting link

[ 131.392027] ata6: softreset failed (1st FIS failed)

[ 131.392033] ata6: hard resetting link

[ 136.580088] ata6: softreset failed (device not ready)

[ 136.580091] ata6: reset failed, giving up

[ 136.580093] ata6.00: disabled

[ 136.580103] ata6: EH complete

[ 136.580115] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580117] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580119] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580125] end_request: I/O error, dev sdc, sector 0

[ 136.580127] quiet_error: 44 callbacks suppressed

[ 136.580128] Buffer I/O error on device sdc, logical block 0

[ 136.580166] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580169] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580172] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580178] end_request: I/O error, dev sdc, sector 0

[ 136.580181] Buffer I/O error on device sdc, logical block 0

[ 136.580206] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580208] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580210] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580214] end_request: I/O error, dev sdc, sector 0

[ 136.580215] Buffer I/O error on device sdc, logical block 0

[ 136.580234] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580235] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 136.580237] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00

[ 136.580241] end_request: I/O error, dev sdc, sector 0

[ 136.580243] Buffer I/O error on device sdc, logical block 0

[ 136.580259] sd 5:0:0:0: [sdc] Unhandled error code

[ 136.580261] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

driverbyte=DRIVER_OK

532.740118] 2:3:1: cannot set freq 16000 to ep 0x86

[ 533.740143] 2:3:1: cannot set freq 16000 to ep 0x86

[ 534.740056] 2:3:1: cannot set freq 16000 to ep 0x86

[ 535.740069] 2:3:1: cannot set freq 16000 to ep 0x86

[ 536.740094] 2:3:1: cannot set freq 16000 to ep 0x86

[ 537.740121] 2:3:1: cannot set freq 16000 to ep 0x86

[ 538.740147] 2:3:1: cannot set freq 16000 to ep 0x86

[ 539.740048] 2:3:1: cannot set freq 16000 to ep 0x86

[ 540.740074] 2:3:1: cannot set freq 16000 to ep 0x86

[ 541.740100] 2:3:1: cannot set freq 16000 to ep 0x86

[ 542.688036] ata6: softreset failed (1st FIS failed)

[ 542.688041] ata6: hard resetting link

[ 542.740125] 2:3:1: cannot set freq 16000 to ep 0x86

[ 543.740153] 2:3:1: cannot set freq 16000 to ep 0x86

[ 544.740179] 2:3:1: cannot set freq 16000 to ep 0x86

[ 545.740080] 2:3:1: cannot set freq 16000 to ep 0x86

[ 546.740106] 2:3:1: cannot set freq 16000 to ep 0x86

[ 547.740132] 2:3:1: cannot set freq 16000 to ep 0x86

[ 548.740033] 2:3:1: cannot set freq 16000 to ep 0x86

[ 549.740059] 2:3:1: cannot set freq 16000 to ep 0x86

[ 550.996190] 2:3:1: cannot set freq 16000 to ep 0x86

[ 551.996088] 2:3:1: cannot set freq 16000 to ep 0x86

[ 552.692031] ata6: softreset failed (1st FIS failed)

[ 552.692036] ata6: hard resetting link

[ 552.996116] 2:3:1: cannot set freq 16000 to ep 0x86

[ 553.996153] 2:3:1: cannot set freq 16000 to ep 0x86

[ 554.996167] 2:3:1: cannot set freq 16000 to ep 0x86

[ 555.996193] 2:3:1: cannot set freq 16000 to ep 0x86

[ 556.996094] 2:3:1: cannot set freq 16000 to ep 0x86

[ 557.996123] 2:3:1: cannot set freq 16000 to ep 0x86



hvad kernel version køre du med?

og prøv eventuelt og opgradere



se hvad du har med

"uname -a"



og se om der ikke er en nyere med

"apt-get update"

"apt-cache search linux-image"

Der står noget om det her, ligner samme problem. (samme kernel)

http://fixunix.com/kernel/551083-%5Bsda%5D-write-cache-enabled-read-cac…



Så er det vel bare at vente til ubuntu opdatere eller kompile nyere kerne selv (:-

Så kom jeg ned på ~30s (stadig noget længere end før - men ikke altødelæggende)



Nyere kerner ønsker åbenbart ofte at kigge på alle enheder (måske derfor at boot-tiden stadig er markant dårligere). Mit system lå på /dev/sdb1 - mens /dev/sda åbenbart havde det ret skidt.



Opdagede først at noget var galt, da Mint KDE ikke ville finde HDs til installation. MEPIS ville slet ikke boote fra CD! (men ville efter den defekte HD var fjernet). (Måske virker OpenSuse, der frøs sidst jeg prøvede liveboot også ...)