Deling af Filer på Debian

Kan du bruge den på[ windows computer?

Ja - men igen den ber om brugernavn og adgangskode, og hvis skriver info fra brugeren ind fra Debian maskinen skriver den bare fejl bruger eller adgangskode....

HAr en venninde som har haft et ligende problem, hun skulle bare lade begge fælter være blanke og så trykke connect (det er det der står på hendes mac)

Det kan jeg ikke... der skal stå et eller andet, eller kan jeg ikke klikke "OK".... men Windows Computeren kan jo heller ikke få adgang til Linux'en

Er "personlig fildeling" en kode for samba? Eller er det en virtualbox feature?

Måske skal du sætte "guest ok" i smb.conf, eller sætte et sambapassword.

Prøver lige at droppe min smb.conf her:

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
server string = %h server

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan < for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

#======================= Share Definitions =======================

[homes]
comment = Home Directories
browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles

; guest ok = yes
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom


Personlig Fildeling er en "Debian" Ting.... når jeg kommer ind i mappen "Offentlig"...

#0

Installer system-config-samba, og rediger din smb.conf med den.

Min smb.conf, hvor alle LAN maskiner, uanset OS, har fuld adgang til de to angivne mapper (nederst) på Linux uden password. Printer indstillingerne er ikke med her.

Resultatet ser du på billedet herunder.
http://db.tt/kJTqksTe

workgroup = mshome
server string = %h server (Samba, Ubuntu)
dns proxy = no
log file = /var/log/samba/log.%m
max log size = 1000
syslog = 0
panic action = /usr/share/samba/panic-action %d
obey pam restrictions = yes
unix password sync = yes
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
pam password change = yes
map to guest = bad user
usershare allow guests = yes
security = share

[Dokumenter]
path = /home/administrator/Dokumenter
writeable = yes
; browseable = yes
guest ok = yes

[downloads]
path = /home/administrator/Hentede filer
writeable = yes
; browseable = yes
guest ok = yes


Edit: Deaktiver Firewall på OSX indtil du ved om det virker.

Når det kører, kan du oprette genveje fra Mac, Windows og andre Linux til de delte mapper på hvilken-som-helst LAN maskine

prøv i terminalen at skrive smbpasswd –a >brugernavn< så vil den bede dig om at oprette et password for den bruger som du har oprettet.

#9: prøv i terminalen at skrive smbpasswd –a >brugernavn< så vil den bede dig om at oprette et password for den bruger som du har oprettet.

Det er ikke nødvendigt, hvis samba passwords er synkroniserede med UNIX:
unix password sync = yes

Forresten. efter smb er konfigureret, skal enten samba genstartes, eller bedre, genstart alle maskinerne.

Endnu en ting. Efter du retter i smb.conf, kør testparm fra en terminal for at tjekke settings.

Din netværksopsætning på VirtualBox må ikke være sat op til NAT, men kun være Bridged med det fysiske netkort på hosten, hvis altså VirtualBox har sådan noget.

Jeg bruger VMWare Fusion og Workstation, og på dem vil NAT naturligvis segmentere det virtuelle netværk, DHCP serveren i den virtuelle PC tildele IP udenfor det almindelige LAN's IP, og forhindre nem adgang til delingerne.

frogmaster

vil bare sige tak, nu er samba til og arbejde med :)

#11

Selv tak

Den der "system-config-samba" kan den ikke finde i apt-get.....

Why oh why?

#13

Det ville jeg da mene at den gør, men ellers prøv fra Synaptic.

Fra en terminal bør system-config-samba kunne installeres med:

sudo apt-get install system-config-samba

Debian er et glimrende OS, men ikke den nemmeste ;-) Selv bruger jeg Mint 11 Katja. 12'ern Lisa vil jeg ikke installere før den er ordentlig stabil (cinnamon - gnome 3 besvær)

Jeg kan godt lide Debian fordi den er ikke så "Hyped" som Ubuntu er gået hen og blevet... og så synes jeg hele Ubuntu's opsætning er temmelig træls... men måske jeg skulle tage et kig på Mint...

#15: Jeg kan godt lide Debian fordi den er ikke så "Hyped" som Ubuntu er gået hen og blevet...

Det kan vi godt blive enige om. Hvad der egentligt undrer mig lidt, det er at medlemmerne her tilsyneladende ikke bruger/kender linux backtrack. De er da ellers nørdede nok. Jeg læser i hvert fald ingen der nævner den.

BackTrack er baseret på Ubuntu, men uden at være hyped. Den er mindst ligeså hurtig som Debian. Der er flere ting ved den der anderledes, fx at den starter i runlevel 3 (starter i UNIX), ligesom i gamle dage, og at den kører som root i X efter man selv starter X.

Den er standard installeret med terminal programmer som metasploit, Genix-wifi-Cracker-ng, en Wi-Fi WEB og WPA cracker GUI, osv, og er mest beregnet til security checks,

system-config-samba er ikke noget problem. Du kan læse lidt om BT herfra hvis du gider. Der er også links til backTrack.

http://www.24.dk/group/linux/forum/thread/2178901

Det er fordi BT kun bliver brugt til pentest, eller det er i hvertfald meningen.
Med BT får du jo en masse programmer og lort man ikke får brug for med mindre man pentester. Og hvem gider ha 150 programmer installeret, som man ikke bruger.
Personligt ville jeg aldrig anbefale at bruge den som ens main desktop.
Jeg har den selv installeret i VMWare, og tager den frem når jeg pentester.

#17: Posted den: 27. Februar 2012 - 8:10 #17

OK, der andre end mig der har BT ;-)