Kan ikke brænde CD'er
Hej,
Jeg kan afspille både CD'er og DVD'er i Linux Mint 18.3 på min computer, men ikke længere brænde dem. Jeg har prøvet forskellige brænderprogrammer, men de indlæser slet ikke CD/DVD-drevet og kan kun lave aftryksfiler. Er det bare en hardware defekt, eller kan det skyldes noget andet?
Jeg kan afspille både CD'er og DVD'er i Linux Mint 18.3 på min computer, men ikke længere brænde dem. Jeg har prøvet forskellige brænderprogrammer, men de indlæser slet ikke CD/DVD-drevet og kan kun lave aftryksfiler. Er det bare en hardware defekt, eller kan det skyldes noget andet?
Kommentarer5
Jeg kan afspille både
Du bør opgradere til Linux Mint 19.03 eller Mint 20 (Ubuntu 20.04).
#0Start dit brænderprogram
Softwaren:
Start dit brænderprogram op fra terminalen, forsøg at brænde en cd, og se om ikke du for nogle fejlmeldinger.
En anden mulighed - Hardwaren - kør
sudo dmesg -C
forsøg at brænde en cd
kør
sudo dmesg
altså uden -C, - giver kernen nogle fejlmeldinger.
Hvad for et brænderprogram, bruger du?
Jeg har prøvet med Brasero,
tl@tl-P5Q-SE ~ $ sudo dmesg -G
[sudo] adgangskode for tl:
dmesg: ugyldigt flag -- G
Usage:
dmesg [options]
Display or control the kernel ring buffer.
Tilvalg:
-C, --clear clear the kernel ring buffer
-c, --read-clear read and clear all messages
-D, --console-off disable printing messages to console
-E, --console-on enable printing messages to console
-F, --file use the file instead of the kernel log buffer
-f, --facility restrict output to defined facilities
-H, --human human readable output
-k, --kernel display kernel messages
-L, --color[=] colorize messages (auto, always or never)
colors are enabled by default
-l, --level restrict output to defined levels
-n, --console-level set level of messages printed to console
-P, --nopager do not pipe output into a pager
-r, --raw print the raw message buffer
-S, --syslog force to use syslog(2) rather than /dev/kmsg
-s, --buffer-size buffer size to query the kernel ring buffer
-u, --userspace display userspace messages
-w, --follow wait for new messages
-x, --decode decode facility and level to readable string
-d, --show-delta show time delta between printed messages
-e, --reltime show local time and time delta in readable format
-T, --ctime show human readable timestamp (may be inaccurate!)
-t, --notime don't print messages timestamp
--time-format show time stamp using format:
[delta|reltime|ctime|notime|iso]
Suspending/resume will make ctime and iso timestamps inaccurate.
-h, --help display this help and exit
-V, --version output version information and exit
Supported log facilities:
kern - kernel messages
user - random user-level messages
mail - mail system
daemon - system daemons
auth - security/authorization messages
syslog - messages generated internally by syslogd
lpr - line printer subsystem
news - network news subsystem
Supported log levels (priorities):
emerg - system is unusable
alert - action must be taken immediately
crit - critical conditions
err - error conditions
warn - warning conditions
notice - normal but significant condition
info - informational
debug - debug-level messages
For more details see dmesg(1).
tl@tl-P5Q-SE ~ $ brasero
** (brasero:18983): CRITICAL **: gst_ffmpeg_cfg_set_property: assertion 'qdata->size == sizeof (gint64)' failed
** (brasero:18983): CRITICAL **: brasero_track_type_equal: assertion 'type_B != NULL' failed
(brasero:18983): GLib-CRITICAL **: Source ID 1423 was not found when attempting to remove it
(brasero:18983): GLib-CRITICAL **: Source ID 1424 was not found when attempting to remove it
(brasero:18983): GLib-CRITICAL **: Source ID 1478 was not found when attempting to remove it
(brasero:18983): GLib-CRITICAL **: Source ID 1476 was not found when attempting to remove it
(brasero:18983): GLib-CRITICAL **: Source ID 1487 was not found when attempting to remove it
(brasero:18983): GLib-CRITICAL **: Source ID 1490 was not found when attempting to remove it
(brasero:18983): GLib-CRITICAL **: Source ID 1512 was not found when attempting to remove it
(brasero:18983): GLib-CRITICAL **: Source ID 1524 was not found when attempting to remove it
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
tl@tl-P5Q-SE ~ $ sudo dmesg
[ 0.901125] loop: module loaded
[ 0.901272] ata_piix 0000:00:1f.2: version 2.13
[ 0.901355] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.902439] scsi host0: ata_piix
[ 0.902529] scsi host1: ata_piix
[ 0.902580] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[ 0.902583] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[ 0.902655] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.903501] scsi host2: ata_piix
[ 0.903579] scsi host3: ata_piix
[ 0.903629] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.903631] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.903728] libphy: Fixed MDIO Bus: probed
[ 0.903729] tun: Universal TUN/TAP device driver, 1.6
[ 0.903729] tun: (C) 1999-2004 Max Krasnyansky
[ 0.903764] PPP generic driver version 2.4.2
[ 0.903808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.903811] ehci-pci: EHCI PCI platform driver
[ 0.903907] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.903913] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.903923] ehci-pci 0000:00:1a.7: debug port 1
[ 0.907823] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.907832] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe8ffc00
[ 0.920013] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.920058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.920060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920061] usb usb1: Product: EHCI Host Controller
[ 0.920062] usb usb1: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[ 0.920063] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.920191] hub 1-0:1.0: USB hub found
[ 0.920201] hub 1-0:1.0: 6 ports detected
[ 0.920456] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.920461] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.920470] ehci-pci 0000:00:1d.7: debug port 1
[ 0.924363] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.924374] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe8ff800
[ 0.940011] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.940062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.940063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.940064] usb usb2: Product: EHCI Host Controller
[ 0.940066] usb usb2: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[ 0.940067] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.940179] hub 2-0:1.0: USB hub found
[ 0.940185] hub 2-0:1.0: 6 ports detected
[ 0.940347] ehci-platform: EHCI generic platform driver
[ 0.940356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.940359] ohci-pci: OHCI PCI platform driver
[ 0.940372] ohci-platform: OHCI generic platform driver
[ 0.940379] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.940459] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.940463] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.940468] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.940490] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.940529] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.940531] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.940532] usb usb3: Product: UHCI Host Controller
[ 0.940534] usb usb3: Manufacturer: Linux 4.8.0-52-generic uhci_hcd
[ 0.940535] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.940637] hub 3-0:1.0: USB hub found
[ 0.940643] hub 3-0:1.0: 2 ports detected
[ 0.940806] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.940810] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.940815] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.940836] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.940876] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.940877] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.940878] usb usb4: Product: UHCI Host Controller
[ 0.940879] usb usb4: Manufacturer: Linux 4.8.0-52-generic uhci_hcd
[ 0.940881] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.940985] hub 4-0:1.0: USB hub found
[ 0.940990] hub 4-0:1.0: 2 ports detected
[ 0.941149] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.941154] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.941158] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.941174] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 0.941212] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.941213] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.941215] usb usb5: Product: UHCI Host Controller
[ 0.941216] usb usb5: Manufacturer: Linux 4.8.0-52-generic uhci_hcd
[ 0.941217] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.941322] hub 5-0:1.0: USB hub found
[ 0.941328] hub 5-0:1.0: 2 ports detected
[ 0.941492] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.941497] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.941501] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.941517] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.941555] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.941557] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.941558] usb usb6: Product: UHCI Host Controller
[ 0.941559] usb usb6: Manufacturer: Linux 4.8.0-52-generic uhci_hcd
[ 0.941560] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.941663] hub 6-0:1.0: USB hub found
[ 0.941668] hub 6-0:1.0: 2 ports detected
[ 0.941830] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.941834] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.941839] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.941854] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.941892] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.941894] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.941895] usb usb7: Product: UHCI Host Controller
[ 0.941896] usb usb7: Manufacturer: Linux 4.8.0-52-generic uhci_hcd
[ 0.941897] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.942002] hub 7-0:1.0: USB hub found
[ 0.942008] hub 7-0:1.0: 2 ports detected
[ 0.942166] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.942170] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.942174] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.942190] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.942228] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.942229] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.942231] usb usb8: Product: UHCI Host Controller
[ 0.942232] usb usb8: Manufacturer: Linux 4.8.0-52-generic uhci_hcd
[ 0.942233] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.942336] hub 8-0:1.0: USB hub found
[ 0.942341] hub 8-0:1.0: 2 ports detected
[ 0.942498] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.942499] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.943028] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.943130] mousedev: PS/2 mouse device common for all mice
[ 0.943265] rtc_cmos 00:01: RTC can wake from S4
[ 0.943377] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.943398] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.943405] i2c /dev entries driver
[ 0.943463] device-mapper: uevent: version 1.0.3
[ 0.943528] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.943554] platform eisa.0: Probing EISA bus 0
[ 0.943555] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.943557] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.943558] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.943559] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.943561] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.943562] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.943563] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.943564] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.943566] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.943567] platform eisa.0: EISA: Detected 0 cards
[ 0.943572] cpufreq_nforce2: No nForce2 chipset
[ 1.007004] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.007241] NET: Registered protocol family 10
[ 1.007478] NET: Registered protocol family 17
[ 1.007486] Key type dns_resolver registered
[ 1.007704] microcode: sig=0x1067a, pf=0x1, revision=0xa07
[ 1.007742] microcode: Microcode Update Driver: v2.01 , Peter Oruba
[ 1.007746] Using IPI No-Shortcut mode
[ 1.007869] registered taskstats version 1
[ 1.007874] Loading compiled-in X.509 certificates
[ 1.012810] Loaded X.509 cert 'Build time autogenerated kernel key: 248deed26d25e50fadef7c87d781738700f8823a'
[ 1.012826] zswap: loaded using pool lzo/zbud
[ 1.025180] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.026872] Key type big_key registered
[ 1.028453] Key type trusted registered
[ 1.030033] Key type encrypted registered
[ 1.030035] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.030038] ima: No TPM chip found, activating TPM-bypass!
[ 1.030055] evm: HMAC attrs: 0x1
[ 1.030355] Magic number: 8:954:324
[ 1.030393] tty tty49: hash matches
[ 1.030420] acpi PNP0B00:00: hash matches
[ 1.030454] rtc_cmos 00:01: setting system clock to 2020-10-08 10:19:46 UTC (1602152386)
[ 1.030886] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.030887] EDD information not available.
[ 1.030930] PM: Hibernation image not present or could not be loaded.
[ 1.180694] isapnp: No Plug & Play device found
[ 1.232762] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.243316] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.404015] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[ 1.587032] usb 6-1: New USB device found, idVendor=18f8, idProduct=0f97
[ 1.587035] usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.587037] usb 6-1: Product: USB OPTICAL MOUSE
[ 1.704062] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.704072] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.714742] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.714750] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.736297] ata2.01: HPA detected: current 312579695, native 312581808
[ 1.736301] ata2.01: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[ 1.736303] ata2.01: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.740950] ata2.01: configured for UDMA/133
[ 1.757330] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
[ 1.757333] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.832293] ata1.00: configured for UDMA/133
[ 1.832457] scsi 0:0:0:0: Direct-Access ATA ST3320620AS J PQ: 0 ANSI: 5
[ 1.864205] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.864239] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.864249] sd 0:0:0:0: [sda] Write Protect is off
[ 1.864251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.864269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.864407] scsi 1:0:1:0: Direct-Access ATA Hitachi HDS72161 ABEA PQ: 0 ANSI: 5
[ 1.884019] tsc: Refined TSC clocksource calibration: 2792.999 MHz
[ 1.884023] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28426b16f90, max_idle_ns: 440795205097 ns
[ 1.895357] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.895796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.896196] sd 1:0:1:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 1.896229] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 1.896242] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.896244] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.896272] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.912205] sdb: sdb1 sdb2
[ 1.912537] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.912815] Freeing unused kernel memory: 980K (d7c2f000 - d7d24000)
[ 1.912842] Write protecting the kernel text: 8272k
[ 1.912933] Write protecting the kernel read-only data: 3348k
[ 1.912933] NX-protecting the kernel data: 6064k
[ 1.913060] ------------[ cut here ]------------
[ 1.913065] WARNING: CPU: 1 PID: 1 at /build/linux-hwe-csRQ0c/linux-hwe-4.8.0/arch/x86/mm/dump_pagetables.c:225 note_page+0x664/0x840
[ 1.913067] x86/mm: Found insecure W+X mapping at address c00a0000/0xc00a0000
[ 1.913067] Modules linked in:
[ 1.913071] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.8.0-52-generic #55~16.04.1-Ubuntu
[ 1.913071] Hardware name: System manufacturer P5Q SE/P5Q SE, BIOS 1004 06/17/2009
[ 1.913073] d7b60967 d5346182 00000286 f60afe70 d73dcd9f f60afeb4 d7a413a0 f60afea0
[ 1.913077] d707276a d7a41368 f60afed4 00000001 d7a413a0 000000e1 d7068d14 000000e1
[ 1.913080] f60aff34 80000000 00000000 f60afec0 d70727d6 00000009 00000000 f60afeb4
[ 1.913083] Call Trace:
[ 1.913088] [] dump_stack+0x58/0x79
[ 1.913090] [] __warn+0xea/0x110
[ 1.913092] [] ? note_page+0x664/0x840
[ 1.913093] [] warn_slowpath_fmt+0x46/0x60
[ 1.913094] [] note_page+0x664/0x840
[ 1.913096] [] ptdump_walk_pgd_level_core+0x1b5/0x2e0
[ 1.913098] [] ptdump_walk_pgd_level_checkwx+0x16/0x20
[ 1.913100] [] mark_rodata_ro+0x105/0x130
[ 1.913103] [] kernel_init+0x2c/0x100
[ 1.913105] [] ? schedule_tail+0x11/0x50
[ 1.913107] [] ret_from_kernel_thread+0xe/0x24
[ 1.913108] [] ? rest_init+0x70/0x70
[ 1.913110] ---[ end trace 52f34e19135e4753 ]---
[ 1.913162] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
[ 1.924822] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.924907] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.924931] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.927017] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.941803] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.941970] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.942298] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.943432] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.943823] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.943904] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.981631] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.004268] [drm] Initialized drm 1.1.0 20060810
[ 2.009362] scsi host4: pata_marvell
[ 2.012805] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.017613] scsi host5: pata_marvell
[ 2.017676] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 2.017677] ata6: DUMMY
[ 2.028763] Floppy drive(s): fd0 is 1.44M
[ 2.065013] usbcore: registered new interface driver usbhid
[ 2.065015] usbhid: USB HID core driver
[ 2.067891] FDC 0 is a post-1991 82077
[ 2.087677] [drm] radeon kernel modesetting enabled.
[ 2.087736] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 2.087736] fb: switching to radeondrmfb from VESA VGA
[ 2.087823] Console: switching to colour dummy device 80x25
[ 2.088227] [drm] initializing kernel modesetting (RV770 0x1002:0x9442 0x1787:0x2003 0x00).
[ 2.088236] [drm] register mmio base: 0xFE9E0000
[ 2.088236] [drm] register mmio size: 65536
[ 2.088304] ATOM BIOS: RV770PRO
[ 2.088333] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 2.088335] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 2.088336] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.088337] [drm] RAM width 256bits DDR
[ 2.088389] [TTM] Zone kernel: Available graphics memory: 438520 kiB
[ 2.088390] [TTM] Zone highmem: Available graphics memory: 1030108 kiB
[ 2.088391] [TTM] Initializing pool allocator
[ 2.088396] [TTM] Initializing DMA pool allocator
[ 2.088416] [drm] radeon: 512M of VRAM memory ready
[ 2.088417] [drm] radeon: 1024M of GTT memory ready.
[ 2.088426] [drm] Loading RV770 Microcode
[ 2.088498] [drm] Internal thermal controller with fan control
[ 2.088549] [drm] radeon: power management initialized
[ 2.088625] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.089662] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 2.093450] [drm] PCIE GART of 1024M enabled (table at 0x0000000000146000).
[ 2.093485] radeon 0000:01:00.0: WB enabled
[ 2.093488] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc1cc00
[ 2.093489] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc1cc0c
[ 2.093953] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xf8e16230
[ 2.093956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.093957] [drm] Driver supports precise vblank timestamp query.
[ 2.093958] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.093994] radeon 0000:01:00.0: radeon: using MSI.
[ 2.094018] [drm] radeon: irq initialized.
[ 2.124670] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:18F8:0F97.0001/input/input3
[ 2.124785] hid-generic 0003:18F8:0F97.0001: input,hidraw0: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1/input0
[ 2.125492] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:18F8:0F97.0002/input/input4
[ 2.126221] ATL1E 0000:02:00.0 enp2s0: renamed from eth0
[ 2.140085] [drm] ring test on 0 succeeded in 1 usecs
[ 2.140090] [drm] ring test on 3 succeeded in 2 usecs
[ 2.179063] ata5.00: ATAPI: JLMS XJ-HD165H, CH11, max UDMA/33
[ 2.179067] ata5.01: ATAPI: TSSTcorpCD/DVDW TS-H552B, TS04, max UDMA/33
[ 2.179630] ata5.00: configured for UDMA/33
[ 2.184376] ata5.01: configured for UDMA/33
[ 2.185118] hid-generic 0003:18F8:0F97.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1/input1
[ 2.189319] scsi 4:0:0:0: CD-ROM JLMS XJ-HD165H CH11 PQ: 0 ANSI: 5
[ 2.212471] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.212474] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.212612] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.212749] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.213847] scsi 4:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-H552B TS04 PQ: 0 ANSI: 5
[ 2.237850] sr 4:0:1:0: [sr1] scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 2.237979] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 2.238113] sr 4:0:1:0: Attached scsi generic sg3 type 5
[ 2.314750] [drm] ring test on 5 succeeded in 1 usecs
[ 2.314754] [drm] UVD initialized successfully.
[ 2.314899] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.314912] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.370328] random: fast init done
[ 2.372017] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.571197] usb 8-2: New USB device found, idVendor=0a12, idProduct=0001
[ 2.571201] usb 8-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.908074] clocksource: Switched to clocksource tsc
[ 2.972027] [drm] ib test on ring 5 succeeded
[ 2.972720] [drm] Radeon Display Connectors
[ 2.972721] [drm] Connector 0:
[ 2.972721] [drm] DVI-I-1
[ 2.972722] [drm] HPD1
[ 2.972723] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 2.972724] [drm] Encoders:
[ 2.972725] [drm] DFP1: INTERNAL_UNIPHY
[ 2.972725] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 2.972726] [drm] Connector 1:
[ 2.972727] [drm] DIN-1
[ 2.972727] [drm] Encoders:
[ 2.972728] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 2.972728] [drm] Connector 2:
[ 2.972729] [drm] DVI-I-2
[ 2.972729] [drm] HPD2
[ 2.972730] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 2.972731] [drm] Encoders:
[ 2.972731] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.972732] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 3.034325] [drm] fb mappable at 0xD0347000
[ 3.034326] [drm] vram apper at 0xD0000000
[ 3.034327] [drm] size 3145728
[ 3.034327] [drm] fb depth is 24
[ 3.034328] [drm] pitch is 4096
[ 3.034381] fbcon: radeondrmfb (fb0) is primary device
[ 3.034450] Console: switching to colour frame buffer device 128x48
[ 3.034474] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.048019] [drm] Initialized radeon 2.46.0 20080528 for 0000:01:00.0 on minor 0
[ 3.704011] raid6: mmxx1 gen() 3653 MB/s
[ 3.772017] raid6: mmxx2 gen() 4157 MB/s
[ 3.840007] raid6: sse1x1 gen() 2461 MB/s
[ 3.908015] raid6: sse1x2 gen() 3218 MB/s
[ 3.976007] raid6: sse2x1 gen() 4348 MB/s
[ 4.044004] raid6: sse2x1 xor() 4887 MB/s
[ 4.112009] raid6: sse2x2 gen() 4815 MB/s
[ 4.180004] raid6: sse2x2 xor() 5836 MB/s
[ 4.180005] raid6: using algorithm sse2x2 gen() 4815 MB/s
[ 4.180006] raid6: .... xor() 5836 MB/s, rmw enabled
[ 4.180007] raid6: using ssse3x1 recovery algorithm
[ 4.183612] xor: measuring software checksum speed
[ 4.220003] pIII_sse : 10227.000 MB/sec
[ 4.260002] prefetch64-sse: 11597.000 MB/sec
[ 4.260003] xor: using function: prefetch64-sse (11597.000 MB/sec)
[ 4.294486] Btrfs loaded, crc32c=crc32c-generic
[ 4.402633] random: crng init done
[ 4.892028] blk_update_request: I/O error, dev fd0, sector 0
[ 4.892034] floppy: error -5 while reading block 0
[ 5.115504] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.077061] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.077179] systemd[1]: Detected architecture x86.
[ 6.081209] systemd[1]: Set hostname to .
[ 7.973478] systemd[1]: Created slice System Slice.
[ 7.973594] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.973726] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.973797] systemd[1]: Created slice User and Session Slice.
[ 7.973837] systemd[1]: Listening on Syslog Socket.
[ 7.973874] systemd[1]: Listening on udev Control Socket.
[ 7.973905] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.631217] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.961008] lp: driver loaded but no devices found
[ 8.997188] ppdev: user-space parallel port driver
[ 9.263695] systemd-journald[350]: Received request to flush runtime journal from PID 1
[ 11.884186] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.303335] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20160422/utaddress-255)
[ 12.303343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.303345] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20160422/utaddress-255)
[ 12.303348] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.303349] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20160422/utaddress-255)
[ 12.303352] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.303352] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.960523] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 13.010796] Bluetooth: Core ver 2.21
[ 13.010816] NET: Registered protocol family 31
[ 13.010816] Bluetooth: HCI device and connection manager initialized
[ 13.010821] Bluetooth: HCI socket layer initialized
[ 13.010823] Bluetooth: L2CAP socket layer initialized
[ 13.010829] Bluetooth: SCO socket layer initialized
[ 13.037742] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 13.090008] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 13.090011] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.090012] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 13.090014] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 13.090015] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 13.090016] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 13.090018] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 13.090019] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 13.090020] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 13.107898] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 13.107971] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 13.108050] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.108214] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.108285] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.108360] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.108429] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.108500] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.190930] usbcore: registered new interface driver btusb
[ 13.294193] intel_powerclamp: No package C-state available
[ 13.324373] intel_powerclamp: No package C-state available
[ 14.560090] Adding 4095996k swap on /dev/sda5. Priority:-1 extents:1 across:4095996k FS
[ 16.223427] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 17.760768] cgroup: new mount options do not match the existing superblock, will be ignored
[ 20.939149] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.939151] Bluetooth: BNEP filters: protocol multicast
[ 20.939155] Bluetooth: BNEP socket layer initialized
[ 24.957533] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 24.957803] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <1000 Mbps Full Duplex>
[ 59.223478] Bluetooth: RFCOMM TTY layer initialized
[ 59.223484] Bluetooth: RFCOMM socket layer initialized
[ 59.223489] Bluetooth: RFCOMM ver 1.11
[ 512.549641] perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 799.611691] perf: interrupt took too long (3146 > 3142), lowering kernel.perf_event_max_sample_rate to 63500
[ 2116.005947] perf: interrupt took too long (3936 > 3932), lowering kernel.perf_event_max_sample_rate to 50750
[ 2877.201753] perf: interrupt took too long (4924 > 4920), lowering kernel.perf_event_max_sample_rate to 40500
Jeg kan stadig ikke brænde en CD/DVD, så måske er der ingen vej udenom en opgradering?
Det er ikke sudo dmesg -G
sudo dmesg -C
Du kan sagtens teste drevet, med Mint 19.03, fra en usb-livecd, - og se om det går bedre.
Er der en hardware fejl, er det måske ikke den her pc, du vil ny-installere på.
Ups, ja -C. Her er
tl@tl-P5Q-SE ~ $ sudo dmesg -C
[sudo] adgangskode for tl:
tl@tl-P5Q-SE ~ $ brasero
** (brasero:24950): CRITICAL **: gst_ffmpeg_cfg_set_property: assertion 'qdata->size == sizeof (gint64)' failed
(brasero:24950): GLib-GObject-WARNING **: attempting to add an interface (EggTreeMultiDragSource) to class (GtkFileSystemModel) after class_init
(brasero:24950): GLib-GObject-WARNING **: attempting to add an interface (EggTreeMultiDragSource) to class (GtkFileSystemModel) after class_init
(brasero:24950): GLib-GObject-WARNING **: attempting to add an interface (EggTreeMultiDragSource) to class (GtkFileSystemModel) after class_init
(brasero:24950): GLib-GObject-WARNING **: attempting to add an interface (EggTreeMultiDragSource) to class (GtkFileSystemModel) after class_init
(brasero:24950): GLib-CRITICAL **: Source ID 2556 was not found when attempting to remove it
tl@tl-P5Q-SE ~ $ sudo dmesg
tl@tl-P5Q-SE ~ $ brasero
** (brasero:25020): CRITICAL **: gst_ffmpeg_cfg_set_property: assertion 'qdata->size == sizeof (gint64)' failed
** (brasero:25020): CRITICAL **: brasero_track_type_equal: assertion 'type_B != NULL' failed
(brasero:25020): GLib-CRITICAL **: Source ID 1630 was not found when attempting to remove it
(brasero:25020): GLib-CRITICAL **: Source ID 1628 was not found when attempting to remove it
(brasero:25020): GLib-CRITICAL **: Source ID 1699 was not found when attempting to remove it
(brasero:25020): GLib-CRITICAL **: Source ID 1695 was not found when attempting to remove it
(brasero:25020): GLib-CRITICAL **: Source ID 1702 was not found when attempting to remove it
(brasero:25020): GLib-CRITICAL **: Source ID 1713 was not found when attempting to remove it
(brasero:25020): GLib-CRITICAL **: Source ID 1716 was not found when attempting to remove it
(brasero:25020): GLib-CRITICAL **: Source ID 1719 was not found when attempting to remove it
Jeg kan stadig ikke brænde, kun lave aftryk, så ja, jeg må nok have fat i et usb-stik og lave en usb-livecd. Eller måske finde et andet drev.